Hey guys,
I submitted a Q few days back about crystal reports chart, when I submitted my question I used the "notify me of replies". I guess there is a problem with that feature, because when I click "post" I got an error message - as if my post could not be sent. So I tried few times again, while copy-pasting my message but manually re-writing my subject. eventually without the "notify me" i got a "ok".
Then I went to review my new post - I found SIX OF THEM - apperantly it went thru although the error message....
So guys, I'm sorry, I did not try to "nag" ( I hate this kind of behaviour myself)
and if one of you have an idea and think he can help - please let me know
(don't ignore me :})
Thanks again,
Ori :)
5  1123 
Did it occur to you that no one knows the answer ?, thry the microsoft
crystal newsgroup
--
OHM ( Terry Burns )
. . . One-Handed-Man . . .
"Ori :)" <Or*@discussions.microsoft.com> wrote in message
news:0E**********************************@microsof t.com... Hey guys,
I submitted a Q few days back about crystal reports chart, when I
submitted my question I used the "notify me of replies". I guess there is a
problem with that feature, because when I click "post" I got an error
message - as if my post could not be sent. So I tried few times again,
while copy-pasting my message but manually re-writing my subject. eventually
without the "notify me" i got a "ok".
Then I went to review my new post - I found SIX OF THEM - apperantly it
went thru although the error message....
So guys, I'm sorry, I did not try to "nag" ( I hate this kind of behaviour
myself) and if one of you have an idea and think he can help - please let me know
(don't ignore me :})
Thanks again,
Ori :)
Same thing happened 2 me, but I caught mine on the third time :-)
"Ori :)" wrote: Hey guys,
I submitted a Q few days back about crystal reports chart, when I submitted my question I used the "notify me of replies". I guess there is a problem with that feature, because when I click "post" I got an error message - as if my post could not be sent. So I tried few times again, while copy-pasting my message but manually re-writing my subject. eventually without the "notify me" i got a "ok".
Then I went to review my new post - I found SIX OF THEM - apperantly it went thru although the error message....
So guys, I'm sorry, I did not try to "nag" ( I hate this kind of behaviour myself)
and if one of you have an idea and think he can help - please let me know
(don't ignore me :})
Thanks again,
Ori :)
Naaaa, can't be ! ;)
"One Handed Man ( OHM - Terry Burns )" wrote: Did it occur to you that no one knows the answer ?, thry the microsoft
crystal newsgroup
--
OHM ( Terry Burns )
. . . One-Handed-Man . . .
"Ori :)" <Or*@discussions.microsoft.com> wrote in message
news:0E**********************************@microsof t.com... Hey guys,
I submitted a Q few days back about crystal reports chart, when I
submitted my question I used the "notify me of replies". I guess there is a
problem with that feature, because when I click "post" I got an error
message - as if my post could not be sent. So I tried few times again,
while copy-pasting my message but manually re-writing my subject. eventually
without the "notify me" i got a "ok".
Then I went to review my new post - I found SIX OF THEM - apperantly it
went thru although the error message....
So guys, I'm sorry, I did not try to "nag" ( I hate this kind of behaviour
myself) and if one of you have an idea and think he can help - please let me know
(don't ignore me :})
Thanks again,
Ori :)
Crystal Phistal Smishtal - Hate the stuff !
--
OHM ( Terry Burns )
. . . One-Handed-Man . . .
"Ori :)" <Or*@discussions.microsoft.com> wrote in message
news:B2**********************************@microsof t.com... Naaaa, can't be ! ;)
"One Handed Man ( OHM - Terry Burns )" wrote:
Did it occur to you that no one knows the answer ?, thry the microsoft
crystal newsgroup
--
OHM ( Terry Burns )
. . . One-Handed-Man . . .
"Ori :)" <Or*@discussions.microsoft.com> wrote in message
news:0E**********************************@microsof t.com... Hey guys,
I submitted a Q few days back about crystal reports chart, when I
submitted my question I used the "notify me of replies". I guess there
is a problem with that feature, because when I click "post" I got an error
message - as if my post could not be sent. So I tried few times again,
while copy-pasting my message but manually re-writing my subject.
eventually without the "notify me" i got a "ok".
Then I went to review my new post - I found SIX OF THEM - apperantly
it went thru although the error message....
So guys, I'm sorry, I did not try to "nag" ( I hate this kind of
behaviour myself) and if one of you have an idea and think he can help - please let me
know (don't ignore me :})
Thanks again,
Ori :)
I hear ya'....
"One Handed Man ( OHM - Terry Burns )" wrote: Crystal Phistal Smishtal - Hate the stuff !
--
OHM ( Terry Burns )
. . . One-Handed-Man . . .
"Ori :)" <Or*@discussions.microsoft.com> wrote in message
news:B2**********************************@microsof t.com... Naaaa, can't be ! ;)
"One Handed Man ( OHM - Terry Burns )" wrote:
Did it occur to you that no one knows the answer ?, thry the microsoft
crystal newsgroup
--
OHM ( Terry Burns )
. . . One-Handed-Man . . .
"Ori :)" <Or*@discussions.microsoft.com> wrote in message
news:0E**********************************@microsof t.com...
> Hey guys,
>
> I submitted a Q few days back about crystal reports chart, when I
submitted my question I used the "notify me of replies". I guess there is a problem with that feature, because when I click "post" I got an error
message - as if my post could not be sent. So I tried few times again,
while copy-pasting my message but manually re-writing my subject. eventually without the "notify me" i got a "ok".
>
> Then I went to review my new post - I found SIX OF THEM - apperantly it went thru although the error message....
>
> So guys, I'm sorry, I did not try to "nag" ( I hate this kind of behaviour myself)
> and if one of you have an idea and think he can help - please let me know > (don't ignore me :})
>
> Thanks again,
>
> Ori :)
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics
by: Marco Herrn |
last post by:
Hi,
I tried to install a package under debian, where in the postinstall
phase some python scripts are called. Then I got the error
"Sorry invalid mode: U".
I looked what this script does and it...
|
by: Peroq |
last post by:
Hi all
I'm not sure ASP is the problem, but my SQL statement seems fine to me.
This works fine :
strSQL = "SELECT .* FROM _RechPat INNER JOIN NivPatri ON
.cod_niv = NivPatri.cod_niv WHERE...
|
by: Ivan Paganini |
last post by:
Sorry, and thanks for the help. I will be more carefull in the next time.
Ivan S>P<M
|
by: Montrose... |
last post by:
After working in c# for a year, the only conclusion I can come to is
that I wish I knew c.
All I need is Linux, the gnu c compiler and I can do anything.
Web services are just open sockets...
|
by: wrytat |
last post by:
Hi! I'm very new to ASP.NET and really need some good advice from experts
here.
I'm creating a web application for my company now. This application has 2
parts. 1 part for the customers to...
|
by: Mike MacSween |
last post by:
S**t for brains strikes again!
Why did I do that? When I met the clients and at some point they vaguely
asked whether eventually would it be possible to have some people who could
read the data...
|
by: Nitin Bhardwaj |
last post by:
Sorry I made a typo in the code
The correct one is like this :
#include <stdio.h>
int main(void)
{
int *buf1 = malloc(10*sizeof(int));
int *buf2 = malloc(10*sizeof(int));
printf(buf1 >...
|
by: Wizard |
last post by:
Hi All,
Sorry for been a pain in the ass, but im looking everywhere and can't seem
to find the answers.
I would like to build a small ASP based site.
I have 4 departments, and what i would...
|
by: MadCrazyNewbie |
last post by:
Hey Group,
Sorry but i`ve been searching everywhere for this even went out and bought a
ADO book and still carn`t find what im looking for:(
I have the following code for my postion changed:
...
|
by: Charles Arthur |
last post by:
How do i turn on java script on a villaon, callus and itel keypad mobile phone
|
by: BarryA |
last post by:
What are the essential steps and strategies outlined in the Data Structures and Algorithms (DSA) roadmap for aspiring data scientists? How can individuals effectively utilize this roadmap to progress...
|
by: nemocccc |
last post by:
hello, everyone, I want to develop a software for my android phone for daily needs, any suggestions?
|
by: Sonnysonu |
last post by:
This is the data of csv file
1 2 3
1 2 3
1 2 3
1 2 3
2 3
2 3
3
the lengths should be different i have to store the data by column-wise with in the specific length.
suppose the i have to...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers,...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing,...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new...
| |
