473,725 Members | 2,018 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Creating installation using setup & deployment project

Hi,
I want to create an installation for my project (built using VB.Net 2003). I
have two components in the setup and user may install only one of them to
start with. I would like to give users the ability to run the setup again to
install the other component. I have built the setup using the Setup and
deployment project in VB.Net. But after installing, when I run the setup
again, the only options I have are 'Repair' and 'Remove'. I don't get a
Modify/Change option. Even through Add/Remove programs, after selecting
'Change', these are the only options available. Is it possible to have a
Modify option or is this a limitation of the Setup and deployment type of
project in .Net?

Thanks,
Aparna
May 16 '06 #1
0 1637

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

5
2198
by: Sue | last post by:
How do I launch an executable at the end of an installation created by Microsoft Visual Studio setup and deployment project?
1
1028
by: santhosh_176 | last post by:
:I Created a Pocket PC application for iPAQ 5450. Every thing went fine even installer creation. I could run the setup and install it into the actual device and worked fine. The application enables syncronization with remote database using merge replication. I found contradictory results while installing the application. I will mention here all the steps that I done while creating and installing setups. Result: Case 1: worked fine. ...
4
2467
by: Nick | last post by:
Hi, I have a windows application, wherein the solution consists of 5 projects. When I try to create a setup and deployment project for this solution, I'm somehow unable to add anything in project output group. I tried creating with a setup wizard, but it just doesn't give me an option to add projects, although I was able to add files into the setup. Moreover, creating a normal setup project also did not help. I tried to add a new...
5
2087
by: InstallAware | last post by:
For Press Inquiries: Sinan Karaca InstallAware Software Corporation 336 Guerrero Street, San Francisco CA 94103 415 358 4094 (voice/fax) sinank@installaware.com http://www.installaware.com/ InstallAware First (and Only) Installation Toolkit to Support .NET 2.0
0
1822
by: shanthsp2002 | last post by:
well friends i have a small tip here which may be helpfull for u there may be situations where we need to use a customized dilogue box while doveloping setup and dyployment project, so u can do that simply by using custom actions . 1st create setup and deployment project... add->new project->windows application name it ReadmeDilogue now customize Form as per ur requirement now again
1
12577
by: ImageAnalyst | last post by:
Yay!!! They fixed this for VS2005. You can now set the default installation to be "Everyone" instead of "Just Me" and you can control whether you even want those radio button installed in your Setup program. >From the Documentation http://msdn2.microsoft.com/en-us/library/5f981xa1.aspx =========================================================== "The InstallAllUsers property for a deployment project determines whether an application is...
20
3151
by: piggy | last post by:
I have developed an application using C# under .NET 2.0 framework. It is almost done and it is time for me to think about deploymnet to all users. I don't have any background about this and would like to see if anyone can help me get started. I have read some about clickonce deployment and not sure much about this yet. Thanks for your help.
2
1800
by: vebuda | last post by:
Hi all, we are creating a windows application using vb.net as front end and access as back end. we are not able to understand when we are creating a setup and deployment project for our application,but source files and forms disappear.We want to make some updations and changes to our source code we are not able to do it. we would be grateful if somebody could explain what exactly happens when we create a setup project for a...
1
1829
by: twdo | last post by:
OK. I am totally frustrated here. I have a setup project within Visual Studio. That setup project is calling a class library project by the use of Custom Actions. Within that class library (my "helper" project), I have an installer class. That class is called by Install, Uninstall, Rollback, etc. I am only using Install and Uninstall. During the installation of my application, I want to create a UNC network share named TRM, pointed to the...
0
8886
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
0
8750
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
0
9401
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...
0
9104
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
0
8090
agi2029
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own.... Now, this would greatly impact the work of software developers. The idea...
1
6701
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
0
4509
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
0
4780
by: adsilva | last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
2
2632
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.