473,839 Members | 1,523 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Application has generated an exception that could not be handled.

kd
Hi All,

I have an exe, developed in vb.net (on XP Professional). I have copied the
exe to another system, which is also an XP Professional system. I have
installed MDAC 2.8. the .NET framework 1.1 and .NET framework 1.1 SP1.

I am getting the following error reported by Common language runtime
debugging services:
Application has generated an exception that could not be handled. Process
id=0x234(584) Thread id=0x404(1028). Click OK to terminate the application.
Click CANCEL to debug the application.

Does anybody know how to fix this error?

Thanks.
kd

Nov 21 '05 #1
4 40926
my first recomendation would be ,,, compile the program in debug mode and
copy this one to the computer that raises the error ,, you might receive a
less generic error thus receiving an error with a notification what is
exactly going wrong ...

if this not solves you problem i would start writing ,,, flags in my code
that outputs to msgboxes , or a trace file ,, so you can see where the error
occurs in your code

hope this helps

Michel Posseth [MCP]

"kd" <kd@discussions .microsoft.com> wrote in message
news:8D******** *************** ***********@mic rosoft.com...
Hi All,

I have an exe, developed in vb.net (on XP Professional). I have copied the
exe to another system, which is also an XP Professional system. I have
installed MDAC 2.8. the .NET framework 1.1 and .NET framework 1.1 SP1.

I am getting the following error reported by Common language runtime
debugging services:
Application has generated an exception that could not be handled. Process
id=0x234(584) Thread id=0x404(1028). Click OK to terminate the
application.
Click CANCEL to debug the application.

Does anybody know how to fix this error?

Thanks.
kd

Nov 21 '05 #2
Make sure you've taken its *exe.config file with it, as if it's missing a
similar error is generated.

"kd" <kd@discussions .microsoft.com> wrote in message
news:8D******** *************** ***********@mic rosoft.com...
Hi All,

I have an exe, developed in vb.net (on XP Professional). I have copied the
exe to another system, which is also an XP Professional system. I have
installed MDAC 2.8. the .NET framework 1.1 and .NET framework 1.1 SP1.

I am getting the following error reported by Common language runtime
debugging services:
Application has generated an exception that could not be handled. Process
id=0x234(584) Thread id=0x404(1028). Click OK to terminate the application. Click CANCEL to debug the application.

Does anybody know how to fix this error?

Thanks.
kd

Nov 21 '05 #3
July 24, 2005

If it is because of a missing app config file, then you could just copy the
..exe to another place on the dev's local hard drive and see if you get the
same error. You should get the same error because the app.config file is
missing in both places. Otherwise, I don't believe that is the problem. Hope
this helps! :-)

--
Joseph Bittman
Microsoft Certified Application Developer

Web Site: http://71.39.42.23
Static IP


"Cathal Connolly [C# MVP]" <cc*******@eg-consulting.com> wrote in message
news:O$******** ******@TK2MSFTN GP09.phx.gbl...
Make sure you've taken its *exe.config file with it, as if it's missing a
similar error is generated.

"kd" <kd@discussions .microsoft.com> wrote in message
news:8D******** *************** ***********@mic rosoft.com...
Hi All,

I have an exe, developed in vb.net (on XP Professional). I have copied
the
exe to another system, which is also an XP Professional system. I have
installed MDAC 2.8. the .NET framework 1.1 and .NET framework 1.1 SP1.

I am getting the following error reported by Common language runtime
debugging services:
Application has generated an exception that could not be handled. Process
id=0x234(584) Thread id=0x404(1028). Click OK to terminate the

application.
Click CANCEL to debug the application.

Does anybody know how to fix this error?

Thanks.
kd


Nov 21 '05 #4
kd
Hi,

Thanks to you both for your trying to help me out.

I checked the .NET documentation on MSDN in this regard. The help says that
the framework version on the deploying machine needs to be the same as the
one that was used for development. On the deployment machine, I had
downloaded the framework and on the development machine, I had installed the
framework from the CD. Though both mention that the framework version is 1.1,
there must've some change...I don't know about this. However, I uninstalled
the framework on the deployment machine and installed a copy from the CD.
This fixed the error.

Thanks once again.
Regards,
kd

"Cathal Connolly [C# MVP]" wrote:
Make sure you've taken its *exe.config file with it, as if it's missing a
similar error is generated.

"kd" <kd@discussions .microsoft.com> wrote in message
news:8D******** *************** ***********@mic rosoft.com...
Hi All,

I have an exe, developed in vb.net (on XP Professional). I have copied the
exe to another system, which is also an XP Professional system. I have
installed MDAC 2.8. the .NET framework 1.1 and .NET framework 1.1 SP1.

I am getting the following error reported by Common language runtime
debugging services:
Application has generated an exception that could not be handled. Process
id=0x234(584) Thread id=0x404(1028). Click OK to terminate the

application.
Click CANCEL to debug the application.

Does anybody know how to fix this error?

Thanks.
kd


Nov 21 '05 #5

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

2
2152
by: Alexey Kouzmitch | last post by:
Hi, I wrote a console application which is called from a SQL Server job. The application utilizes a COM object, to pump data from a legacy (not very old however) application to SQL server. The application works fine, but once in a while it fails with the following message written to the event log: ----------------------------------------------------------------------- The description for Event ID ( 0 ) in Source ( .NET Runtime )...
1
2641
by: Jim | last post by:
I built my Assemblies and created the .MSI file for installation. I've installed it with no problems on my XP & 2K machines. But a friend of mine who is running 2K gets this message when trying to run my app: ----------------------------------------------------------------- Common Language Runtime Debugging Services Application has generated an exception that could not be handled. Process id=0x760(1888), Thread id=0x128(296)...
5
770
by: Skylar Challand | last post by:
I am getting the following message on a Windows XP computer when trying to run a VB program. The same program is installed on 8 different computers without any issues. .NET Framework is installed & app was installed using the installer that comes with Visual Studio .NET. The application uses an ODBC connection to an access database, which should have installed with the installer as well as Crystal Reports, which also is installed with the...
5
488
by: Bob L. | last post by:
Hi everyone, I have two small applications I have written that I am trying run from a network directory. Both applications have a dependency on another assembly (.dll), and I have .NET security wide open. One application is dependent on an interop assembly (Interop.IWshRuntimeLibrary.dll), and it works fine. The other application depends on three assemblies that I have written, and although the executable starts successfully, as soon as...
5
2385
by: | last post by:
I've created a small vb.net application which uses the Data Access Application Block to access a SQL Server 2000 database. The application works fine on the machine with the development environment (Windows 2K) but I am unable to get it to work on two other machines (Windows XP machines). When I try running the application on these machines I get a message box, after some delay, that says "Application has generated an exception that could...
2
1568
by: scorpion53061 | last post by:
This app I am working on generated an exception but I have only found it on his laptop. Other machines do not seem to have this issue. The exception is normally according to what I have seen on the net an ASP.NET exception. So why it is happening in Windows is a mystery to me.
4
10777
by: rs | last post by:
Hi guys Thank you in advance for the help. I developed a simple application using vs.net 2003. running framework 1.1 sp1. the application runs fine on the development machine (win xp). I tried to deploy it on a win 2000 sp4 framework 1.1 sp1. I got the following error Reminder.exe - Common Language Runtime Debugging Services application has generated an exception that could not be handled
2
2156
by: Murthy | last post by:
Hi, After genarating the exe when i run the exe the following error is comming. Common Language Runtime Debugging Services Application has generated an exception that could not be handled. Process id=0xdec (3564), Thread id=0xdf0 (3568) When I click CANCEL to debug, I get this error-message:
1
2917
by: Vijaykumar Gaikwad | last post by:
While running application in user's machine i am getting error message i.e. Application has generated an exception that could not be handled. process id=0x1sec (492), Thread id =0xa04 (2564). Click ok to terminate the application click cancel to debug the application. While running on my machine and some of the users machine it's running fine.Framework installed is same on all the machines. So i don't understand what may be the reason. Could...
0
9855
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
0
10292
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
0
9426
agi2029
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own.... Now, this would greatly impact the work of software developers. The idea...
1
7828
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
0
7017
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...
0
5682
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
1
4482
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
2
4064
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.
3
3132
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.