473,883 Members | 1,793 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

can not access clustering SQL Server after relocation

Hi all:

I have a clustering SQL Server on Node1 and Node2, the Node1 has named
Instance1 and Node2 has named Instance2, no default instance. We
tested it that everthing is OK, then we decide to move to DR location.

The relocation kept the same virtual and phusical server name, and we
did not change SQL Server server network utility. But server IP
addresses were changed(vitual and physical). We can start the
clustering SQL Server as before, and everything looks like well.

However the users can not access it remotely, and they did not change
the client network utility. But if I login the server,I can access it
from Query Analyzer even though ther is not client network utility
setup on the server. I can ping the vitual server name, how can I make
sure the ports are working well? (We did not use the default port for
named instance).

I remember I did input the virtual server IP address when I installed
the clustering SQL Server. Of course, it was change after relocation.
Is it the reason for failed remote login? If it is, how to fix it?

Does anyboday know there is document for clustering SQL Server
relocation?

Thanks
Willie
Jul 20 '05 #1
1 2160
w2***@hotmail.c om (willie) wrote in message news:<66******* *************** ****@posting.go ogle.com>...
Hi all:

I have a clustering SQL Server on Node1 and Node2, the Node1 has named
Instance1 and Node2 has named Instance2, no default instance. We
tested it that everthing is OK, then we decide to move to DR location.

The relocation kept the same virtual and phusical server name, and we
did not change SQL Server server network utility. But server IP
addresses were changed(vitual and physical). We can start the
clustering SQL Server as before, and everything looks like well.

However the users can not access it remotely, and they did not change
the client network utility. But if I login the server,I can access it
from Query Analyzer even though ther is not client network utility
setup on the server. I can ping the vitual server name, how can I make
sure the ports are working well? (We did not use the default port for
named instance).

I remember I did input the virtual server IP address when I installed
the clustering SQL Server. Of course, it was change after relocation.
Is it the reason for failed remote login? If it is, how to fix it?

Does anyboday know there is document for clustering SQL Server
relocation?

Thanks
Willie


This article might help:

http://support.microsoft.com/default...&Product=sql2k

Simon
Jul 20 '05 #2

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

1
5883
by: Nico de Groot | last post by:
I have a 2 node Microsoft 2000 cluster with a shared storage device. I want to create automatic failover for MS SQL 2000 server. I can do that wit the following options: 1. Active/Pasive (one instance installed) 2. Active/Active (More then one instance/virtual sql servers installed) I have a question about option 2.
1
4285
by: kumar | last post by:
Dear Friends, I wanted to configure Failover cluster for SQL Server 2000 on Windows 2000 advanced servers. I have only 2 no.s of windows 2000 advanced server m/cs. I dont have any shared disks and SCSI drives. Can I still configure the Failover clustering? I would like to know more about the need for the shared disks in the
3
5173
by: Shabam | last post by:
When a web application becomes overloaded with traffic, one can offload it by load balancing and clustering the front end web servers. What happens when the back-end MSSQL database becomes overloaded? Does MYSQL offer load balancing and clustering?
5
4138
by: Paul Shaw | last post by:
Can anyone explain why an insert might cause multiple logical bufferpool data reads? Here's a situation that has me scratching my head. Table A's data resides in tablespace B Table A's indexes reside in tablespace C Table A has no long data No other data resides in either of these tablespaces.
14
5430
by: Sean C. | last post by:
Helpful folks, Most of my previous experience with DB2 was on s390 mainframe systems and the optimizer on this platform always seemed very predictable and consistent. Since moving to a WinNT/UDB 7.2 environment, the choices the optimizer makes often seem flaky. But this last example really floored me. I was hoping someone could explain why I get worse response time when the optimizer uses two indexes, than when it uses one. Some context:
11
730
by: chmmr | last post by:
Hi, I am currently in the process of gathering info/experiences for an incoming Linux DB2 clustering phase we actually know nothing about (since we are doing it for the first time ever), so I would really appreciate if you could share some of your experience here or recommend some additional websites/literature aside from IBM Developerworks - specifically, if there are some caveats or things to look out for during the process, etc....
3
5440
by: Simon | last post by:
Hi All, I'm hoping someone will have some words of wisdom for me regarding MS Clustering on Windows 2003. I have a service that runs on a cluster. During invocation it's supposed to determine from the cluster which node is active (this is a active/standby configuration) and either proceed or sleep depending on the status. The interface to the cluster is that advertised by the standard interop layer built by Visual Studio for the...
3
1959
by: dejavue82 | last post by:
Hi, Does anybody know of a software package that allows for several servers, running asp.net 2.0 to be clustered, regardless of where they are located (ie. without a hardware load balancer). This way one could link two or more dedicated servers, perhaps even running on different hosts. Does something like this exist? Thank you for your time!
3
3338
by: Manish | last post by:
I think this question has been asked number of times. However, I am looking for some specific information. Perhaps some of you can help close the gap. Or perhaps you can point me towards right direction. Perhaps this group can help me fill in ms-sqlserver related following questions. 1. Do this database have data Clustering capabilities? 1a. If yes, what mechanism is used such as shared disk, share nothing, etc.
0
9933
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
0
9787
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
0
11128
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...
0
10734
jinu1996
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth. The Art of Business Website Design Your website is...
1
10838
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
0
10408
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
0
9568
agi2029
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own.... Now, this would greatly impact the work of software developers. The idea...
0
7119
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...
2
4212
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.