472,347 Members | 2,316 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Join Bytes to post your question to a community of 472,347 software developers and data experts.

final version of PEP-318 "Decorators for functions and methods"

To go along with the 2.4a3 release, here's an updated version of
the decorator PEP. It describes the state of decorators as they
are in 2.4a3.
PEP: 318
Title: Decorators for Functions and Methods
Version: $Revision: 1.34 $
Last-Modified: $Date: 2004/09/03 09:32:50 $
Author: Kevin D. Smith, Jim Jewett, Skip Montanaro, Anthony Baxter
Status: Draft
Type: Standards Track
Content-Type: text/x-rst
Created: 05-Jun-2003
Python-Version: 2.4
Post-History: 09-Jun-2003, 10-Jun-2003, 27-Feb-2004, 23-Mar-2004, 30-Aug-2004,

This document is meant to describe the decorator syntax and the
process that resulted in the decisions that were made. It does not
attempt to cover the huge number of potential alternative syntaxes,
nor is it an attempt to exhaustively list all the positives and
negatives of each form.

The current method for transforming functions and methods (for instance,
declaring them as a class or static method) is awkward and can lead to
code that is difficult to understand. Ideally, these transformations
should be made at the same point in the code where the declaration
itself is made. This PEP introduces new syntax for transformations of a
function or method declaration.

The current method of applying a transformation to a function or method
places the actual transformation after the function body. For large
functions this separates a key component of the function's behavior from
the definition of the rest of the function's external interface. For

def foo(self):
perform method operation
foo = classmethod(foo)

This becomes less readable with longer methods. It also seems less
than pythonic to name the function three times for what is conceptually
a single declaration. A solution to this problem is to move the
transformation of the method closer to the method's own declaration.
While the new syntax is not yet final, the intent is to replace::

def foo(cls):
foo = synchronized(lock)(foo)
foo = classmethod(foo)

with an alternative that places the decoration in the function's

def foo(cls):

Modifying classes in this fashion is also possible, though the benefits
are not as immediately apparent. Almost certainly, anything which could
be done with class decorators could be done using metaclasses, but
using metaclasses is sufficiently obscure that there is some attraction
to having an easier way to make simple modifications to classes. For
Python 2.4, only function/method decorators are being added.
Why Is This So Hard?

Two decorators (``classmethod()`` and ``staticmethod()``) have been
available in Python since version 2.2. It's been assumed since
approximately that time that some syntactic support for them would
eventually be added to the language. Given this assumption, one might
wonder why it's been so difficult to arrive at a consensus. Discussions
have raged off-and-on at times in both comp.lang.python and the
python-dev mailing list about how best to implement function decorators.
There is no one clear reason why this should be so, but a few problems
seem to be most divisive.

* Disagreement about where the "declaration of intent" belongs.
Almost everyone agrees that decorating/transforming a function at the
end of its definition is suboptimal. Beyond that there seems to be no
clear consensus where to place this information.

* Syntactic constraints. Python is a syntactically simple language
with fairly strong constraints on what can and can't be done without
"messing things up" (both visually and with regards to the language
parser). There's no obvious way to structure this information so
that people new to the concept will think, "Oh yeah, I know what
you're doing." The best that seems possible is to keep new users from
creating a wildly incorrect mental model of what the syntax means.

* Overall unfamiliarity with the concept. For people who have a
passing acquaintance with algebra (or even basic arithmetic) or have
used at least one other programming language, much of Python is
intuitive. Very few people will have had any experience with the
decorator concept before encountering it in Python. There's just no
strong preexisting meme that captures the concept.

* Syntax discussions in general appear to cause more contention than
almost anything else. Readers are pointed to the ternary operator
discussions that were associated with PEP 308 for another example of

There is general agreement that syntactic support is desirable to
the current state of affairs. Guido mentioned `syntactic support
for decorators`_ in his DevDay keynote presentation at the `10th
Python Conference`_, though `he later said`_ it was only one of
several extensions he proposed there "semi-jokingly". `Michael Hudson
raised the topic`_ on ``python-dev`` shortly after the conference,
attributing the initial bracketed syntax to an earlier proposal on
``comp.lang.python`` by `Gareth McCaughan`_.

... _syntactic support for decorators:
... _10th python conference:
... _michael hudson raised the topic:
... _he later said:
... _gareth mccaughan:

Class decorations seem like an obvious next step because class
definition and function definition are syntactically similar,
however Guido remains unconvinced, and class decorators will almost
certainly not be in Python 2.4.

The discussion continued on and off on python-dev from February
2002 through July 2004. Hundreds and hundreds of posts were made,
with people proposing many possible syntax variations. Guido took
a list of proposals to `EuroPython 2004`_, where a discussion took
place. Subsequent to this, he decided that we'd have the `Java-style`_
@decorator syntax, and this appeared for the first time in 2.4a2.
Barry Warsaw named this the 'pie-decorator' syntax, in honor of the
Pie-thon Parrot shootout which was occured around the same time as
the decorator syntax, and because the @ looks a little like a pie.
Guido `outlined his case`_ on Python-dev, including `this piece`_
on some of the (many) rejected forms.

... _EuroPython 2004:
... _outlined his case:
... _this piece:
... _Java-style:
On the name 'Decorator'

There's been a number of complaints about the choice of the name
'decorator' for this feature. The major one is that the name is not
consistent with its use in the `GoF book`_. The name 'decorator'
probably owes more to its use in the compiler area -- a syntax tree is
walked and annotated. It's quite possible that a better name may turn

... _GoF book:
Design Goals

The new syntax should

* work for arbitrary wrappers, including user-defined callables and
the existing builtins ``classmethod()`` and ``staticmethod()``. This
requirement also means that a decorator syntax must support passing
arguments to the wrapper constructor

* work with multiple wrappers per definition

* make it obvious what is happening; at the very least it should be
obvious that new users can safely ignore it when writing their own

* be a syntax "that ... [is] easy to remember once explained"

* not make future extensions more difficult

* be easy to type; programs that use it are expected to use it very

* not make it more difficult to scan through code quickly. It should
still be easy to search for all definitions, a particular definition,
or the arguments that a function accepts

* not needlessly complicate secondary support tools such as
language-sensitive editors and other "`toy parser tools out

* allow future compilers to optimize for decorators. With the hope of
a JIT compiler for Python coming into existence at some point this
tends to require the syntax for decorators to come before the function

* move from the end of the function, where it's currently hidden, to
the front where it is more `in your face`_

Andrew Kuchling has links to a bunch of the discussions about
motivations and use cases `in his blog`_. Particularly notable is `Jim
Huginin's list of use cases`_.

... _toy parser tools out there:
... _in your face:
... _in his blog:
... _Jim Huginin's list of use cases:
Current Syntax

The current syntax for function decorators as implemented in Python
2.4a2 is::

def func(arg1, arg2, ...):

This is equivalent to::

def func(arg1, arg2, ...):
func = dec2(dec1(func))

without the intermediate assignment to the variable ``func``. The
decorators are near the function declaration. The @ sign makes it clear
that something new is going on here.

The decorator statement is limited in what it can accept -- arbitrary
expressions will not work. Guido preferred this because of a `gut

... _gut feeling:
Syntax Alternatives

There have been `a large number`_ of different syntaxes proposed --
rather than attempting to work through these individual syntaxes, it's
worthwhile to break the syntax discussion down into a number of areas.
Attempting to discuss `each possible syntax`_ individually would be an
act of madness, and produce a completely unwieldy PEP.

... _a large number:
... _each possible syntax:
Decorator Location

The first syntax point is the location of the decorators. For the
following examples, we use the @syntax used in 2.4a2.

Decorators before the def statement are the first alternative, and the
syntax used in 2.4a2::

def foo(arg1,arg2):

def bar(low,high):

There have been a number of objections raised to this location -- the
primary one is that it's the first real Python case where a line of code
has an effect on a following line. The syntax available in 2.4a3
requires one decorator per line (in a2, multiple decorators could be
specified on the same line).

People also complained that the syntax quickly got unwieldy when
multiple decorators were used. The point was made, though, that the
chances of a large number of decorators being used on a single function
were small and thus this was not a large worry.

Some of the advantages of this form are that the decorators live outside
the method body -- they are obviously executed at the time the function
is defined.

Another advantage is that a prefix to the function definition fits
the idea of knowing about a change to the semantics of the code before
the code itself, thus you know how to interpret the code's semantics
properly without having to go back and change your initial perceptions
if the syntax did not come before the function definition.

Guido decided `he preferred`_ having the decorators on the line before
the 'def', because it was felt that a long argument list would mean that
the decorators would be 'hidden'

... _he preferred:

The second form is the decorators between the def and the function name,
or the function name and the argument list::

def @classmethod foo(arg1,arg2):

def @accepts(int,int),@returns(float) bar(low,high):

def foo @classmethod (arg1,arg2):

def bar @accepts(int,int),@returns(float) (low,high):

There are a couple of objections to this form. The first is that it
breaks easily 'greppability' of the source -- you can no longer search
for 'def foo(' and find the definition of the function. The second,
more serious, objection is that in the case of multiple decorators, the
syntax would be extremely unwieldy.

The next form, which has had a number of strong proponents, is to have
the decorators between the argument list and the trailing ``:`` in the
'def' line::

def foo(arg1,arg2) @classmethod:

def bar(low,high) @accepts(int,int),@returns(float):

Guido `summarized the arguments`_ against this form (many of which also
apply to the previous form) as:

- it hides crucial information (e.g. that it is a static method)
after the signature, where it is easily missed

- it's easy to miss the transition between a long argument list and a
long decorator list

- it's cumbersome to cut and paste a decorator list for reuse, because
it starts and ends in the middle of a line

... _summarized the arguments:

The next form is that the decorator syntax goes inside the method body at
the start, in the same place that docstrings currently live:

def foo(arg1,arg2):

def bar(low,high):

The primary objection to this form is that it requires "peeking inside"
the method body to determine the decorators. In addition, even though
the code is inside the method body, it is not executed when the method
is run. Guido felt that docstrings were not a good counter-example, and
that it was quite possible that a 'docstring' decorator could help move
the docstring to outside the function body.

The final form is a new block that encloses the method's code. For this
example, we'll use a 'decorate' keyword, as it makes no sense with the
@syntax. ::

def foo(arg1,arg2):

def bar(low,high):

This form would result in inconsistent indentation for decorated and
undecorated methods. In addition, a decorated method's body would start
three indent levels in.
Syntax forms

* ``@decorator``::

def foo(arg1,arg2):

def bar(low,high):

The major objections against this syntax are that the @ symbol is
not currently used in Python (and is used in both IPython and Leo),
and that the @ symbol is not meaningful. Another objection is that
this "wastes" a currently unused character (from a limited set) on
something that is not perceived as a major use.

* ``|decorator``::

def foo(arg1,arg2):

def bar(low,high):

This is a variant on the @decorator syntax -- it has the advantage
that it does not break IPython and Leo. Its major disadvantage
compared to the @syntax is that the | symbol looks like both a capital
I and a lowercase l.

* list syntax::

def foo(arg1,arg2):

[accepts(int,int), returns(float)]
def bar(low,high):

The major objection to the list syntax is that it's currently
meaningful (when used in the form before the method). It's also
lacking any indication that the expression is a decorator.

* list syntax using other brackets (``<...>``, ``[[...]]``, ...)::

def foo(arg1,arg2):

<accepts(int,int), returns(float)>
def bar(low,high):

None of these alternatives gained much traction. The alternatives
which involve square brackets only serve to make it obvious that the
decorator construct is not a list. They do nothing to make parsing any
easier. The '<...>' alternative presents parsing problems because '<'
and '>' already parse as un-paired. They present a further parsing
ambiguity because a right angle bracket might be a greater than symbol
instead of a closer for the decorators.

* ``decorate()``

The ``decorate()`` proposal was that no new syntax be implemented
-- instead a magic function that used introspection to manipulate
the following function. Both Jp Calderone and Philip Eby produced
implementations of functions that did this. Guido was pretty firmly
against this -- with no new syntax, the magicness of a function like
this is extremely high:

Using functions with "action-at-a-distance" through sys.settraceback
may be okay for an obscure feature that can't be had any other
way yet doesn't merit changes to the language, but that's not
the situation for decorators. The widely held view here is that
decorators need to be added as a syntactic feature to avoid the
problems with the postfix notation used in 2.2 and 2.3. Decorators
are slated to be an important new language feature and their
design needs to be forward-looking, not constrained by what can be
implemented in 2.3.

* _`new keyword (and block)`

This idea was the consensus alternate from comp.lang.python (more
on this in `Community Consensus`_ below.) Robert Brewer wrote up a
detailed `J2 proposal`_ document outlining the arguments in favor of
this form. The initial issues with this form are:

- It requires a new keyword, and therefore a ``from __future__
import decorators`` statement.

- The choice of keyword is contentious. However ``using`` emerged
as the consensus choice, and is used in the proposal and

- The keyword/block form produces something that looks like a normal
code block, but isn't. Attempts to use statements in this block
will cause a syntax error, which may confuse users.

A few days later, Guido `rejected the proposal`_ on two main grounds,

... the syntactic form of an indented block strongly
suggests that its contents should be a sequence of statements, but
in fact it is not -- only expressions are allowed, and there is an
implicit "collecting" of these expressions going on until they can
be applied to the subsequent function definition. ...

and secondly:

... the keyword starting the line that heads a block
draws a lot of attention to it. This is true for "if", "while",
"for", "try", "def" and "class". But the "using" keyword (or any
other keyword in its place) doesn't deserve that attention; the
emphasis should be on the decorator or decorators inside the suite,
since those are the important modifiers to the function definition
that follows. ...

Readers are invited to read `the full response`_.

.. _J2 proposal:

.. _rejected the proposal:

.. _the full response:

* Other forms

There are plenty of other variants and proposals on `the wiki page`_.

... _the wiki page:
Why @?

There is some history in Java using @ initially as a marker in `Javadoc
comments`_ and later in Java 1.5 for `annotations`_, which are similar
to Python decorators. The fact that @ was previously unused as a token
in Python also means it's clear there is no possibility of such code
being parsed by an earlier version of Python, leading to possibly subtle
semantic bugs. It also means that ambiguity of what is a decorator
and what isn't is removed. That said, @ is still a fairly arbitrary
choice. Some have suggested using | instead.

For syntax options which use a list-like syntax (no matter where it
appears) to specify the decorators a few alternatives were proposed:
``[|...|]``, ``*[...]*``, and ``<...>``.

... _Javadoc comments:
... _annotations:
Current Implementation, History

Guido asked for a volunteer to implement his preferred syntax, and Mark
Russell stepped up and posted a `patch`_ to SF. This new syntax was
available in 2.4a2. ::

def func(arg1, arg2, ...):

This is equivalent to::

def func(arg1, arg2, ...):
func = dec2(dec1(func))

though without the intermediate creation of a variable named ``func``.

The version implemented in 2.4a2 allowed multiple ``@decorator`` clauses
on a single line. In 2.4a3, this was tightened up to only allowing one
decorator per line.

A `previous patch`_ from Michael Hudson which implements the
list-after-def syntax is also still kicking around.

... _patch: http://www.python.org/sf/979728
... _previous patch: http://starship.python.net/crew/mwh/...x-sugar-3.diff

After 2.4a2 was released, in response to community reaction, Guido
stated that he'd re-examine a community proposal, if the community
could come up with a community consensus, a decent proposal, and an
implementation. After an amazing number of posts, collecting a vast
number of alternatives in the `Python wiki`_, a community consensus
emerged (below). Guido `subsequently rejected`_ this alternate form,
but added:

In Python 2.4a3 (to be released this Thursday), everything remains
as currently in CVS. For 2.4b1, I will consider a change of @ to
some other single character, even though I think that @ has the
advantage of being the same character used by a similar feature
in Java. It's been argued that it's not quite the same, since @
in Java is used for attributes that don't change semantics. But
Python's dynamic nature makes that its syntactic elements never mean
quite the same thing as similar constructs in other languages, and
there is definitely significant overlap. Regarding the impact on
3rd party tools: IPython's author doesn't think there's going to be
much impact; Leo's author has said that Leo will survive (although
it will cause him and his users some transitional pain). I actually
expect that picking a character that's already used elsewhere in
Python's syntax might be harder for external tools to adapt to,
since parsing will have to be more subtle in that case. But I'm
frankly undecided, so there's some wiggle room here. I don't want
to consider further syntactic alternatives at this point: the buck
has to stop at some point, everyone has had their say, and the show
must go on.

... _Python wiki:
... _subsequently rejected:
Community Consensus

This section documents the rejected J2 syntax, and is included for
historical completeness.

The consensus that emerged on comp.lang.python was the proposed J2
syntax (the "J2" was how it was referenced on the PythonDecorators wiki
page): the new keyword ``using`` prefixing a block of decorators before
the ``def`` statement. For example::

def func(cls):

The main arguments for this syntax fall under the "readability counts"
doctrine. In brief, they are:

* A suite is better than multiple @lines. The ``using`` keyword and
block transforms the single-block ``def`` statement into a
multiple-block compound construct, akin to try/finally and others.

* A keyword is better than punctuation for a new token. A keyword
matches the existing use of tokens. No new token category is
necessary. A keyword distinguishes Python decorators from Java
annotations and .Net attributes, which are significantly different

Robert Brewer wrote a `detailed proposal`_ for this form, and Michael
Sparks produced `a patch`_.

... _detailed proposal:
... _a patch:

As noted previously, Guido rejected this form, outlining his problems
with it in `a message`_ to python-dev and comp.lang.python.

... _a message:

Much of the discussion on ``comp.lang.python`` and the ``python-dev``
mailing list focuses on the use of decorators as a cleaner way to use
the ``staticmethod()`` and ``classmethod()`` builtins. This capability
is much more powerful than that. This section presents some examples of

1. Define a function to be executed at exit. Note that the function
isn't actually "wrapped" in the usual sense. ::

def onexit(f):
import atexit
return f

def func():

Note that this example is probably not suitable for real usage, but
is for example purposes only.

2. Define a class with a singleton instance. Note that once the class
disappears enterprising programmers would have to be more creative to
create more instances. (From Shane Hathaway on ``python-dev``.) ::

def singleton(cls):
instances = {}
def getinstance():
if cls not in instances:
instances[cls] = cls()
return instances[cls]
return getinstance

class MyClass:

3. Add attributes to a function. (Based on an example posted by
Anders Munch on ``python-dev``.) ::

def attrs(**kwds):
def decorate(f):
for k in kwds:
setattr(f, k, kwds[k])
return f
return decorate

author="Guido van Rossum")
def mymethod(f):

4. Enforce function argument and return types. Note that this
copies the func_name attribute from the old to the new function.
func_name was made writable in Python 2.4a3::

def accepts(*types):
def check_accepts(f):
assert len(types) == f.func_code.co_argcount
def new_f(*args, **kwds):
for (a, t) in zip(args, types):
assert isinstance(a, t), \
"arg %r does not match %s" % (a,t)
return f(*args, **kwds)
new_f.func_name = f.func_name
return new_f
return check_accepts

def returns(rtype):
def check_returns(f):
def new_f(*args, **kwds):
result = f(*args, **kwds)
assert isinstance(result, rtype), \
"return value %r does not match %s" % (result,rtype)
return result
new_f.func_name = f.func_name
return new_f
return check_returns

@accepts(int, (int,float))
def func(arg1, arg2):
return arg1 * arg2

5. Declare that a class implements a particular (set of) interface(s).
This is from a posting by Bob Ippolito on ``python-dev`` based on
experience with `PyProtocols`_. ::

def provides(*interfaces):
An actual, working, implementation of provides for
the current implementation of PyProtocols. Not
particularly important for the PEP text.
def provides(typ):
declareImplementation(typ, instancesProvide=interfaces)
return typ
return provides

class IBar(Interface):
"""Declare something about IBar here"""

class Foo(object):
"""Implement something here..."""

.. _PyProtocols: http://peak.telecommunity.com/PyProtocols.html

Of course, all these examples are possible today, though without
syntactic support.
Open Issues

1. It's not yet certain that class decorators will be incorporated
into the language at a future point. Guido expressed skepticism about
the concept, but various people have made some `strong arguments`_
(search for ``PEP 318 -- posting draft``) on their behalf in
``python-dev``. It's exceedingly unlikely that class decorators
will be in Python 2.4.

.. _strong arguments:

2. The choice of the ``@`` character will be re-examined before
Python 2.4b1.


This document has been placed in the public domain.

Local Variables:
mode: indented-text
indent-tabs-mode: nil
sentence-end-double-space: t
fill-column: 70

Jul 18 '05 #1
0 2217

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

by: Paul Wilson | last post by:
Currently i have .NET 2003 installed on my computer, can i now go ahead & install .NET Version 2 (2005). Without any repercussions??? Regards,...
by: My4thPersonality | last post by:
Has the fact that both Java and C# are garbage collected, and C++ in not, anything to do with the fact that there is no language item to prevent a...
by: pemo | last post by:
Does anyone know how many standard functions there are in the various standard's c99 etc? Thanks -- ============== *Not a pedant*...
by: Anthony Baxter | last post by:
On behalf of the Python development team and the Python community, I'm happy to announce the release of Python 2.4.3 (final). Python 2.4.3 is a...
by: mangesh | last post by:
class B { virtual void m( ) { } }; class D : public B {
by: lcw1964 | last post by:
Greetings, all, I am trying to port a little bit of math code to gcc, that in the original version used the long double version of several...
by: Amir Michail | last post by:
Hi, I have bookmarklets with a # in their urls but safari changes the # to %23. And unfortunately, the bookmarklet does not work with %23. You...
by: shapper | last post by:
Hello, I was using LINQ with VS 2008 Beta 2 and suddenly after installed VS2008 final version I get an error. My code is really simple: Dim...
by: Fortis Florin | last post by:
Final CFP: Workshop on Workflow and Process Management (WfPM'08), September 2008, Timisoara, Romania EXTENDED DEADLINES...
by: concettolabs | last post by:
In today's business world, businesses are increasingly turning to PowerApps to develop custom business applications. PowerApps is a powerful tool...
by: better678 | last post by:
Question: Discuss your understanding of the Java platform. Is the statement "Java is interpreted" correct? Answer: Java is an object-oriented...
by: teenabhardwaj | last post by:
How would one discover a valid source for learning news, comfort, and help for engineering designs? Covering through piles of books takes a lot of...
by: Kemmylinns12 | last post by:
Blockchain technology has emerged as a transformative force in the business world, offering unprecedented opportunities for innovation and...
by: jalbright99669 | last post by:
Am having a bit of a time with URL Rewrite. I need to incorporate http to https redirect with a reverse proxy. I have the URL Rewrite rules made...
by: Matthew3360 | last post by:
Hi, I have a python app that i want to be able to get variables from a php page on my webserver. My python app is on my computer. How would I make it...
by: Arjunsri | last post by:
I have a Redshift database that I need to use as an import data source. I have configured the DSN connection using the server, port, database, and...
by: WisdomUfot | last post by:
It's an interesting question you've got about how Gmail hides the HTTP referrer when a link in an email is clicked. While I don't have the specific...
by: Matthew3360 | last post by:
Hi, I have been trying to connect to a local host using php curl. But I am finding it hard to do this. I am doing the curl get request from my web...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.