473,880 Members | 1,952 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

eric3, pyqt, qscintilla - guru needed.

reh
Have installed on Redhat 9.0 in the following order;

Qscintilla
sip
PyQt

When I install eric3 (python install.py), I get this error;
Sorry, please install QScintilla and/or reinstall
PyQt with QScintilla support.

It seems the errors occurs in the install.py file at:
from qtext import QextScintilla

From qtext.py, I have typed in at the python prompt;
import libsip # ok here
from qt import QWidet # ok here
from qt import QObject # ok here
from qt import QPrinter # ok here
import libqtextc # error here Traceback (most recent call last):
File "<stdin>", line 1, in ?
ImportError: libqscintilla.s o.2: cannot open shared object file: No such
file or directory


Been through all readme files, tried just about everything.
Anyone have an idea what's wrong.

--
robert
redhat 9.0

Jul 18 '05 #1
4 2712
reh
reh wrote:
Have installed on Redhat 9.0 in the following order;

Qscintilla
sip
PyQt

When I install eric3 (python install.py), I get this error;
Sorry, please install QScintilla and/or reinstall
PyQt with QScintilla support.

It seems the errors occurs in the install.py file at:
from qtext import QextScintilla

From qtext.py, I have typed in at the python prompt;
>>> import libsip # ok here
>>> from qt import QWidet # ok here
>>> from qt import QObject # ok here
>>> from qt import QPrinter # ok here
>>> import libqtextc # error here Traceback (most recent call last):
File "<stdin>", line 1, in ?
ImportError: libqscintilla.s o.2: cannot open shared object file: No such
file or directory >>>


Been through all readme files, tried just about everything.
Anyone have an idea what's wrong.

Forgot to say that the libqscintilla.s o.2 is in;
/usr/lib/qt-3.1/lib
and the same path is in my /etc/ld.so.conf
--
robert
redhat 9.0

Jul 18 '05 #2
It sounds like qscintilla was either not detected during the compile process
of PyQt or the library is not available. My guess would be that the .so
files did not get copied into the correct place. Check $QTDIR/lib for
libqscintilla.s o.2. If it's not there, go back into the directory in which
you unpacked qscintilla and copy all the .so files into $QTDIR/lib.

If $QTDIR isn't set, look for the lib directory in the folllowing places:
/usr/lib/qt/lib
/usr/local/lib/qt/lib
/usr/qt/lib

Also, make sure that the qt versions match up when you are looking. If in
doubt, check all qt/lib directories you find.
Finally, if all that looks good, start the PyQt compile process again and
make sure it detects and enables qscintilla support.

Greg Fortune
Fortune Solutions

reh wrote:
Have installed on Redhat 9.0 in the following order;

Qscintilla
sip
PyQt

When I install eric3 (python install.py), I get this error;
Sorry, please install QScintilla and/or reinstall
PyQt with QScintilla support.

It seems the errors occurs in the install.py file at:
from qtext import QextScintilla

From qtext.py, I have typed in at the python prompt;
>>> import libsip # ok here
>>> from qt import QWidet # ok here
>>> from qt import QObject # ok here
>>> from qt import QPrinter # ok here
>>> import libqtextc # error here Traceback (most recent call last):
File "<stdin>", line 1, in ?
ImportError: libqscintilla.s o.2: cannot open shared object file: No such
file or directory >>>


Been through all readme files, tried just about everything.
Anyone have an idea what's wrong.


Jul 18 '05 #3
reh wrote:
reh wrote:
Have installed on Redhat 9.0 in the following order;

Qscintilla
sip
PyQt

When I install eric3 (python install.py), I get this error;
Sorry, please install QScintilla and/or reinstall
PyQt with QScintilla support.

It seems the errors occurs in the install.py file at:
from qtext import QextScintilla

From qtext.py, I have typed in at the python prompt;
>>> import libsip # ok here
>>> from qt import QWidet # ok here
>>> from qt import QObject # ok here
>>> from qt import QPrinter # ok here
>>> import libqtextc # error here

Traceback (most recent call last):
File "<stdin>", line 1, in ?
ImportError: libqscintilla.s o.2: cannot open shared object file: No
such
file or directory
>>>


Been through all readme files, tried just about everything.
Anyone have an idea what's wrong.

Forgot to say that the libqscintilla.s o.2 is in;
/usr/lib/qt-3.1/lib
and the same path is in my /etc/ld.so.conf


Did you do a "ldconfig" after the installation of qscintilla?

Detlev
--
Detlev Offenbach
de****@die-offenbachs.de
Jul 18 '05 #4
reh
Detlev Offenbach wrote:
reh wrote:
reh wrote:
Have installed on Redhat 9.0 in the following order;

Qscintilla
sip
PyQt

When I install eric3 (python install.py), I get this error;
Sorry, please install QScintilla and/or reinstall
PyQt with QScintilla support.

It seems the errors occurs in the install.py file at:
from qtext import QextScintilla

From qtext.py, I have typed in at the python prompt;
>>> import libsip # ok here
>>> from qt import QWidet # ok here
>>> from qt import QObject # ok here
>>> from qt import QPrinter # ok here
>>> import libqtextc # error here
Traceback (most recent call last):
File "<stdin>", line 1, in ?
ImportError: libqscintilla.s o.2: cannot open shared object file: No
such
file or directory
>>>

Been through all readme files, tried just about everything.
Anyone have an idea what's wrong.

Forgot to say that the libqscintilla.s o.2 is in;
/usr/lib/qt-3.1/lib
and the same path is in my /etc/ld.so.conf


Did you do a "ldconfig" after the installation of qscintilla?

Detlev


That did it. Thanks!!!

On first observation eric looks really nice, well done.

Can't wait to dig in.

thanks;
--
robert
redhat 9.0

Jul 18 '05 #5

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

1
1867
by: Geoffrey Clements | last post by:
I'm brand new to Python - just giving it a try but I'm having trouble with eric3. This query isn't exactly about the Python language but it is related. I run KDE on linux so I already have Qt installed. I have installed Python, SIP, QScintilla, PyQt and eric3. When I run eric3 the fonts in the editor are way too large, so I selected preferences to change them but when I hit "OK" I get a segfault whether I have made a change or not.
0
1233
by: Surya Kiran | last post by:
Hi, I'm a newbie to eric3 debugger. I'm facing a problem in debugging. Let me explain my problem. I'm using eric3.2 with python2.3, qt-3.2.0 and pyqt-3.7 I've a project, which spans over a number of files. so i've created a ..e3p project file for eric3 debugging purposes. when i load the project file, eric3 was not listing all the sources (i expect the eric3 to load all the source python files from .e3p file).
35
7786
by: Vamsi Mudrageda | last post by:
I am kind of new to Python, and after trying and using wxPython, I found it kind of lacking in easy-to-read documentation, speed at loading, and GUI response-time. So I am looking for an another GUI toolkit that is cross-platform for Python, and am leaning toward PyQt (PyGTK is kind of dull looking in comparison). Unfortunately, although TrollTech says Qt is cross-platform, its license strategy has me a bit confused. So here is to...
4
1489
by: Reiner Block | last post by:
Hi, I installed eric3 and done the settings. But I don't like the white background and changed at Options/Editor/Sourcecode, language Python the background color and font. But it affects just the source text in the editor. After the end of the text in each line is still the white background. But I found no possibility to change that. Does I am blind or is it really not possible?
22
1843
by: dataangel | last post by:
I'm trying to find an IDE for python that I'm comfortable with. For my needs IDLE actually works 99% of the time, but on my current project I need to have lots of files open at once, and I would really prefer to have tabbed browsing. I'd even try to code this into IDLE myself but I have no experience with Tk. All of the IDEs I've found (google + python wiki page) are either A) Commercial or B) Written for either an older version of...
9
1457
by: Bats | last post by:
Has anyone here managed to install Eric (Python GUI) on Fedora Core 1? I have had no end of sh*t from qscintilla right on up. It seems I have to jump through an endless series of hoops in a certain order to get to the end. Any step-by-step kinda help? *:* -- Bats
1
1601
by: Kevin Walzer | last post by:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Eric3, the PyQt IDE, seems to be buggy on Mac OS X. I'm running the latest versions of PyQt, Qt, SIP, QScintilla, etc., but the new version of Eric (3.5), which was just released this month, crashes whenever I try to save a file. The previous version, 3.4.2, seems more stable. Anyone else encounter crashes with the new version of Eric, whether it's on OS X or another system?
17
11846
by: eholbroo | last post by:
I've narrowed down my toolkit selection for my project to wxPython and pyQt, and now i'd like to hear any opinions, war stories, peeves, etc, about them, particularly from anyone who's used _both_toolkits_. I'm only mildly interested in the IDEs and UI designers for each, as i want to do as much as i can in just Xemacs and xterm. Feel free to rant, rave, pontificate, whatever. t.i.a., E
7
1578
by: Franz Steinhäusler | last post by:
Hello NG, (Win XP) I have successfully installed pyqt, but not qtext, which I need to run Eric3. The PyQT demo files run fine. I've downloaded QScintilla, compiled via MS-VC, but (I suppose I need the SIG), to translate or provide
0
9772
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
0
11089
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...
0
10713
jinu1996
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth. The Art of Business Website Design Your website is...
1
10809
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
1
7948
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
0
5777
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
1
4595
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
2
4192
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.
3
3219
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.