473,563 Members | 2,668 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

apache2 seg faults

I had to compile my own php to get ldap support since the latest php
packages for slackware don't have it. So I do the compile and then it
doesn't work. I check the apache log and it segfaults. CLI works fine
and doesn't give any errors. Here's some debug info (i know the gdb
output isn't all that helpful, I guess I can enable debugging on php if
it would help. although I assumed that was all coming from the apache
part):

Slackware Linux 10.0 kernel 2.6.9

Server version: Apache/2.0.52
Server built: Oct 1 2004 12:50:59

PHP version 4.3.10
../configure --prefix=/usr --with-config-file-path=/etc/apache2 --with-
openssl --with-bz2 --with-db3 --enable-ftp --with-mysql=/usr --with-ldap
--with-xml --enable-trans-sid --enable-sockets --with-curl --enable-
magic-quotes --with-apxs2=/usr/sbin/apxs --sysconfdir=/etc
apache's error log (I was just trying to load a page with phpinfo() in
it):
[Thu Dec 16 21:54:33 2004] [notice] Digest: generating secret for digest
authentication ...
[Thu Dec 16 21:54:33 2004] [notice] Digest: done
[Thu Dec 16 21:54:34 2004] [notice] Apache/2.0.52 (Unix) DAV/2 PHP/4.3.10
configured -- resuming normal operations
[Thu Dec 16 21:55:43 2004] [notice] child pid 1879 exit signal
Segmentation fault (11)
(gdb) run -X -f /etc/apache2/httpd.conf
Starting program: /usr/sbin/httpd -X -f /etc/apache2/httpd.conf
(no debugging symbols found)...(no debugging symbols found)...(no
debugging symbols found)...(no debugging symbols found)...(no debugging
symbols found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols found)...
(no debugging symbols found)...(no debugging symbols found)...(no
debugging symbols found)...[Thread debugging using libthread_db enabled]
[New Thread 16384 (LWP 4251)]
(no debugging symbols found)...(no debugging symbols found)...(no
debugging symbols found)...(no debugging symbols found)...(no debugging
symbols found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols found)...
(no debugging symbols found)...(no debugging symbols found)...(no
debugging symbols found)...(no debugging symbols found)...(no debugging
symbols found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols found)...
(no debugging symbols found)...(no debugging symbols found)...(no
debugging symbols found)...(no debugging symbols found)...(no debugging
symbols found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols found)...
(no debugging symbols found)...(no debugging symbols found)...(no
debugging symbols found)...(no debugging symbols found)...(no debugging
symbols found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols found)...
(no debugging symbols found)...(no debugging symbols found)...(no
debugging symbols found)...(no debugging symbols found)...(no debugging
symbols found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols found)...
(no debugging symbols found)...(no debugging symbols found)...(no
debugging symbols found)...(no debugging symbols found)...(no debugging
symbols found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols found)...
(no debugging symbols found)...(no debugging symbols found)...(no
debugging symbols found)...(no debugging symbols found)...(no debugging
symbols found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols found)...
(no debugging symbols found)...(no debugging symbols found)...(no
debugging symbols found)...(no debugging symbols found)...(no debugging
symbols found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols found)...
(no debugging symbols found)...(no debugging symbols found)...(no
debugging symbols found)...(no debugging symbols found)...(no debugging
symbols found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols found)...
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 16384 (LWP 4251)]
php_handler (r=0x81dc138) at /usr/tmp/php-
4.3.10/sapi/apache2handler/sapi_apache2.c: 454
454 apply_config(co nf);
(gdb) bt
#0 php_handler (r=0x81dc138) at /usr/tmp/php-
4.3.10/sapi/apache2handler/sapi_apache2.c: 454
#1 0x08067e16 in ap_run_handler ()
#2 0x080683e8 in ap_invoke_handl er ()
#3 0x0806538b in ap_process_requ est ()
#4 0x08060c69 in ap_process_http _connection ()
#5 0x08070e96 in ap_run_process_ connection ()
#6 0x080667c8 in child_main ()
#7 0x0806697e in make_child ()
#8 0x080669ef in startup_childre n ()
#9 0x08067169 in ap_mpm_run ()
#10 0x0806c8d8 in main ()
--
VR
Jul 17 '05 #1
0 1689

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

0
2190
by: Aldo Polli | last post by:
Hi, I have this error when I start apache2 with php4 Syntax error on line 233 of /mypath/apache2/conf/httpd.conf: Cannot load /mypath/apache2/modules/libphp4.so into server: dynamic linker: /mypath/apache2/bin/httpd: relocation error: symbol not found: ap_pass_brigade; referenced from: /mypath/apache2/modules/libphp4.so I compile apache...
5
2790
by: Ad Astra | last post by:
I am completely new to PHP and am finding installation the most difficult part to understand and implement. Could someone please review the rather long missive below and assist me? I have provided it in as clear a fashion as possible. COMPONENTS * Windows XP (Home) * Apache2 server (successfully installed; located as
2
14153
by: Mike | last post by:
I am sure that I am making a simple boneheaded mistake and I would appreciate your help in spotting in. I have just installed apache_2.0.53-win32-x86-no_ssl.exe php-5.0.3-Win32.zip Smarty-2.6.7.tar.gz on a system running WindowsXP SP2. Apache and PHP tested out fine. After adding Smarty, I ran the following http://localhost/testphp.php
1
3689
by: news8080 | last post by:
I downloaded a GUI for nagios that uses PHP but when I point the browser at the PHP file, it shows me the source of .php file instead of executing it, if i use command line 'php filname.php' then I see exepected result but why can I not do that via web?? # /usr/local/bin/php -v PHP 4.4.0 (cli) (built: Jul 21 2005 11:55:49) Copyright (c)...
1
6549
by: tbatwork828 | last post by:
I've PerfMon-ed our application for several days now and it consistently averages 2000 Page Faults/sec, and accumulates on average about 4 mill page faults during 35 mins. During the same monitoring time of 35 mins, there is never any sustained occurence of hard page faults -as a matter of fact, almost on avg 98+ % of the entire time the app...
4
3773
by: tbatwork828 | last post by:
Related to my other post on Graphics.FillRectangle and a lot of page faults caused by this call... We determine that when Control.DoubleBuffer=true to avoid the flicker effect, Graphics.FillRectangle causes a lot of soft page faults - order of 700/sec and more... When Control.DoubleBuffer=false, we have no page faults at all - 0/sec. Has...
2
4149
by: David Morgan | last post by:
Hi Have 4Gb of RAM and plenty of free disk. Those page faults are for DLLHOST.EXE using ~370Mb RAM. inetinfo.exe has 403,106,036 page faults at the time of writing and is using ~145Mb RAM. Why so many page faults. System uptime ~500 hours. The ASP-based site does interface with a SQL Server instance on a completely
3
1806
by: scotp | last post by:
Does anyone know what would cause excessive page faults running the js function below? The most common browser used is IE 6. The page has records that include text & checkbox inputs. Each record also has a hidden input named "questions", whose value is an id that is used in the name of inputs to be disabled. The number of page faults...
5
6492
RedSon
by: RedSon | last post by:
Grr! I've been trying to set up apache2 to serve my bugzilla page for like a week now and I give up! I installed bugzilla: /srv$ ls -l drwxr-xr-x www-data www-data bugzilla I've tried to create a bugzilla site
0
7659
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main...
0
7580
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language...
0
7882
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. ...
0
7945
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the...
0
6244
agi2029
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then...
1
5481
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes...
0
3634
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in...
1
1194
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.
0
916
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.