473,836 Members | 1,956 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

is there anyway to hide php error messages ?

56 New Member
Is there anyway to hide php error messages? Because i have in my php code error but it redirecting after 1 sec and shows my hosting path and php error number, but this error doesn't effect anything.
Dec 10 '09
14 5196
8,658 Recognized Expert Moderator Expert
just you and hosting. though a decent error catching system can react immediately (e.g. sending a mail), while you have to access the error.log yourself.
Dec 11 '09 #11
1,044 Recognized Expert Top Contributor
Well, depending on the capability of your host, it's possible that they are the only ones with access. Servers are capable of creating one central errors.log for the entire shared server, or for developing individual errors.log files for each sect.

When looking for a good host, this is normally one of the things that I check. I also check for proper PHP settings (i.e. magic_quotes), flexible database table naming (i.e. no automatic prefix), and that they have the newest versions of Apache, PHP, and MySQL installed. Normally, a lack of any of these attributes implies that the server is run by amateurs who are more concerned about themselves than their users.

But, I digress. :P
Dec 11 '09 #12
56 New Member
Thanks to Mr Dormilich and Mr Kovik for replies

is there a way to check if the hosting is using central or individual errors.log ?
Dec 11 '09 #13
1,044 Recognized Expert Top Contributor
If you have FTP access (which you *should*), then look in the file structure. There's a folder that is your root folder, where your main index page should exist. If you have access to the folder above your root folder, there is likely a "logs" folder in which you will find your errors.log file.

If not, then look through all of the folders in your root folder that you did not explicitly create. If you do happen to find your errors.log file in one of these folders, I suggest that you use a .htaccess file to block access to that folder (unless the server already blocks it). Otherwise, it may be open to the public eye.
Dec 11 '09 #14
56 New Member
Thanks Dear Kovik
but i logged in FTP but i just see all my folders and there's no other folders or files
i'm using godaddy hosting
Dec 13 '09 #15

Sign in to post your reply or Sign up for a free account.

Similar topics

by: lkrubner | last post by:
This is a general computer question, but I'm writing in PHP so I'll post this to comp.lang.php. I've been writing a content management system. I've a Singleton object that keeps track of all errors and stores them in an array. As things work right now, I write out each error message individually. I'm thinking that as the code grows, this system will not continue to scale. Right now my software consists of 1.4 megs of PHP code. I don't...
by: Galina | last post by:
Hello I have created a trigger not to let records with certain fields null to be inserted into the table: BEGIN IF :new.RUL_CODE is null or :new.FES_UINS_CODE is null or :new.FES_UIO_CALOCC is null then RAISE_APPLICATION_ERROR(-20000,'Record is not saved. Check course record and try to save again.'); end if;
by: DataBard007 | last post by:
Hello Access Gurus: I use Win98SE and Access97. I just built a simple Access97 application which holds all contact information for my personal contacts, such as first name, last name, address, city, state, etc. When the user wants to search for a particular record, he does two things: 1. On the form is a text box on which he enters the text he is searching for.
by: Brian Conway | last post by:
I have no idea what is going on. I have a Login screen where someone types in their login information and this populates a datagrid based off of the login. Works great in debug and test through VS, however, when I change to release and put it out on the web it fails giving me the following error message The underlying connection was closed. Could not establish a trust relationship with the remote server.
by: tlyczko | last post by:
Hello, I've searched on toggling divs and didn't really find what I was looking for, I saved a bunch of different threads. I have a form with several different text boxes for things like dates, numbers, etc. arranged in a table, each row has the same kind of text boxes for data entry (10 rows probably). I want to have a separate section above the form where I can toggle a div containing an appropriate error message to appear after the...
by: mac | last post by:
Brand Newbie Alert! I am working through the "Build a Program Now!" book by Microsoft Press. The last chapter has a little app that should stay in the system tray when the user clicks on the 'X' to close the form. It should only shutdown when the user chooses an option from the context menu. The book suggests writing code in the FormClosing event of the form "Main" to modify the behavior of the 'X' menu on the form. I have reproduced...
by: lawrence k | last post by:
I've made it habit to check all returns in my code, and usually, on most projects, I'll have an error function that reports error messages to some central location. I recently worked on a project where someone suggested to me I was spending too much time writing error messages, and that I was therefore missing the benefit of using a scripting language. The idea, apparently, is that the PHP interpreter writes all the error messages that are...
by: Paul McGuire | last post by:
Is there any way to hide portions of an exception stack trace? When users get exceptions when using pyparsing, there are usually many layers of pyparsing-internal stack messages that are not at all helpful in diagnosing the problem - the intervening messages just divert the user's attention from the most significant parts of the stack, usually the user's call into my module, and the root exception message. For instance, here is a stack...
by: FutureShock | last post by:
I am using a registration class to process a registration form and need some opinions on returning error messages. I am self referring the page on submit. I would like to send each form field to the class for processing (validating, sanitizing, etc..) So far no problem. Now I am throwing ideas around on how best to check for error messages to the users.
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own.... Now, this would greatly impact the work of software developers. The idea...
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.