473,899 Members | 4,321 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

MS Word to HTML

Hi Everyone! First post. I'm from Argentina, but actually living in
Germany for in a practica. I'm looking for a code to convert Word to
HTML. Thanks!!

Mar 29 '06 #1
14 8601
Misael said the following on 29/03/2006 12:12:
Hi Everyone! First post. I'm from Argentina, but actually living in
Germany for in a practica. I'm looking for a code to convert Word to
HTML. Thanks!!


Word already does it. Save as --> Save as Type, select *.html.

However, don't do this, because it will come out like shit.

--
Oli
Mar 29 '06 #2
I know that function, but i want to do it in the server. The classes i
find all uses word or i need to install something extra, that's not
good.

Mar 29 '06 #3
Misael wrote:
I know that function, but i want to do it in the server. The classes i
find all uses word or i need to install something extra, that's not
good.


I don't think you'll find anything which doesn't require Word or some other
extra. Converting from a Word document to HTML can be quite complicated.

--
=============== ===
Remove the "x" from my email address
Jerry Stuckle
JDS Computer Training Corp.
js*******@attgl obal.net
=============== ===
Mar 29 '06 #4
On Wed, 29 Mar 2006 03:12:27 -0800, Misael wrote:
Hi Everyone! First post. I'm from Argentina, but actually living in
Germany for in a practica. I'm looking for a code to convert Word to HTML.
Thanks!!


There are a couple of command line utilities for Linux to do this.
Personally I use wvWare (wvHTML for your purposes, although I tend to use
wvText for what I require).

Another utility is Antiword, although that doesn't export HTML only
XML/Docbook - so you'd need to convert that afterwards.

Cheers,


--
Andy Jeffries MBCS CITP ZCE | gPHPEdit Lead Developer
http://www.gphpedit.org | PHP editor for Gnome 2
http://www.andyjeffries.co.uk | Personal site and photos

Mar 29 '06 #5
On Wed, 29 Mar 2006 11:55:46 +0000, Andy Jeffries wrote:
On Wed, 29 Mar 2006 03:12:27 -0800, Misael wrote:
Hi Everyone! First post. I'm from Argentina, but actually living in
Germany for in a practica. I'm looking for a code to convert Word to
HTML. Thanks!!


There are a couple of command line utilities for Linux to do this.
Personally I use wvWare (wvHTML for your purposes, although I tend to use
wvText for what I require).

Another utility is Antiword, although that doesn't export HTML only
XML/Docbook - so you'd need to convert that afterwards.


I just noticed in another post you said without installing anything extra
- in that case your SOL!

However, compiling wvware and keeping the binary within your
webroot shouldn't be hard... Just make sure Apache doesn't have write
permissions to it.

Cheers,
Andy

--
Andy Jeffries MBCS CITP ZCE | gPHPEdit Lead Developer
http://www.gphpedit.org | PHP editor for Gnome 2
http://www.andyjeffries.co.uk | Personal site and photos

Mar 29 '06 #6
I would like to use wvWare, but the server that i use is in windows. : (

Mar 29 '06 #7
On Wed, 29 Mar 2006 03:58:48 -0800, Misael wrote:
I would like to use wvWare, but the server that i use is in windows. : (


Wv for Windows
http://gnuwin32.sourceforge.net/packages/wv.htm

Cheers,
Andy

--
Andy Jeffries MBCS CITP ZCE | gPHPEdit Lead Developer
http://www.gphpedit.org | PHP editor for Gnome 2
http://www.andyjeffries.co.uk | Personal site and photos

Mar 29 '06 #8
Thanks, but i still have to install something, and that doesn't help
me...i'm not he owner of the server.

Mar 29 '06 #9
"Misael" <mi**********@g mail.com> wrote in message
news:11******** **************@ g10g2000cwb.goo glegroups.com.. .
Thanks, but i still have to install something, and that doesn't help
me...i'm not he owner of the server.

Since that's the case, don't you think it would be time to re-think the
situation? Like why use doc's anyway? Who is the supplier of these word
documents and why do they need to be converted to html? Could the supplier
use another format instead of word? Since your options converting it at
server side are pretty limited, would it be possible to do the conversion in
the client side? What's the whole scenario here?

--
"En ole paha ihminen, mutta omenat ovat elinkeinoni." -Perttu Sirviö
sp**@outolempi. net | Gedoon-S @ IRCnet | rot13(xv***@bhg byrzcv.arg)
Mar 29 '06 #10

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

4
16203
by: Microsoft | last post by:
I'm trying to display a word document inside a web page, but everytime I do I get this error: Error Type: Microsoft VBScript runtime (0x800A0046) Permission denied: 'CreateObject' Does anybody know the correct way to do this? I don't want to link to a document, but rather display a word file inside the asp page.
20
7368
by: Al Moritz | last post by:
Hi all, I was always told that the conversion of Word files to HTML as done by Word itself sucks - you get a lot of unnecessary code that can influence the design on web browsers other than Internet Explorer. Our computer expert in my company had told me already a while ago that I should learn HTML and encode myself. I was never inclined to do so (I am no computer expert), and when upon his suggestion I looked how my pages (converted to...
3
1093
by: Andy | last post by:
I am trying to do the following from an ASP.NET Web Application (C#). User fills out a form. The program takes those answers and merges them with a WORD document. I have tried the few examples of launching word from my app and get ACCESS DENIED when the Word attempts to start. Once the merge is complete, the document gets saved and sent to the user to open and further edit if necessary. The initial merge part doesn't have to
3
2622
by: glevik | last post by:
Hello, Anyone that can think of a way to programmaticaly determine the word on an HTML page that the user clicked on will be my hero for life. Leo
15
3392
by: Caversham | last post by:
Is there any macro / other tool - free or commercial - that can split long Word docs into multiple XHTML pages? Any comments on the quality/effectiveness of suitable products also welcomed.
0
2046
by: ajk | last post by:
Hi, All: I know how to insert files into a Word doc using C#. However, the program I've written to do this runs much too slowly. The "myObj".Application.Selection.InsertFile method executes at a snails pace. Here are the detais: I wrote a C# program that creates a new Word doc and then loops through a list of HTML files to insert them into the new doc (sample code below). The purpose of the program is to make one Word doc out of all...
1
615
by: ajk | last post by:
. Hi, All: I know how to insert files into a Word doc using C#. However, the program I've written to do this runs much too slowly. The "myObj".Application.Selection.InsertFile method executes at a snails pace. Here are the detais: I wrote a C# program that creates a new Word doc and then loops through a
12
4177
by: enak | last post by:
I have found some code that shows how to convert an html form to Word. The message said to simply put the following in the Page_load: Response.ContentType = "application/ms-word" Response.AddHeader("content-disposition", "inline; filename=BP_CaseStatus.doc") Now all I should have to do is create the page just like I would if I were going to display it in the browser.
5
12888
by: STeve | last post by:
Hey guys, I currently have a 100 page word document filled with various "articles". These articles are delimited by the Style of the text (IE. Heading 1 for the various titles) These articles will then be converted into HTML and saved. I want to write a parser through vb.net that uses the word object model and was wondering how this could be achieved? The problem i am running into is that i can not test whether the selected text is...
2
579
by: CM | last post by:
Hi, Could anyone please help me? I am completing my Master's Degree and need to reproduce a Webpage in Word. Aspects of the page are lost and some of the text goes. I would really appreciate it. The link to the document is http://www.surveymonkey.com/s.asp?u=689952259313 I have spent 15 hours trying to sort this but to no avail.
0
9997
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
0
11276
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...
1
10976
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
0
10497
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
1
8043
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
0
7204
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...
0
5891
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
2
4301
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.
3
3320
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.