Some history,
I have a Maxtor OneTouch II USB 2 backup drive with Retrospect Express
HD.
I recently found that Retrospect Express HD hangs at Updating Status.
This has happened before, and all that was required was a clean
reinstall.
This time, I found several possible solutions in Maxtor's knowledge
base, particularily Answer 2352 - which notes that .NET 1 broke the
program. However, none fixed the problem, see below.
First, I uninstalled and reinstalled the Maxtor One Touch and
Retrospect Express HD. No change.
Next, I deleted the RBC file and all other files on the OneTouch II
drive and uninstalled/reinstalled the Maxtor and Retrospect Express HD
software again. Still did not work.
I then installed Maxtor's patch WIN_ReXHDOT2_DRVUP.EXE. That did not
help.
I reinstalled the Microsoft .NET 1.1 patch #885055, per Answer 2353.
Retrospect still hangs at updating status.
I resently installed version 2.0 of NET. Seems like the likely
suspect. Whatever it is, Retrospect Express HD is still hanging at the
updating status point.
What should I do now?
12  6052 
The dotnetfx 1.x and 2.0 are pretty mainstream installs. It is unlikely this
is the cause of your problem but it is possible. Sounds like it is an issue
with EMC / Retrospect. Look to them for support.
-A
<le*****@yahoo.com> wrote in message
news:i6********************************@4ax.com... Some history,
I have a Maxtor OneTouch II USB 2 backup drive with Retrospect Express
HD.
I recently found that Retrospect Express HD hangs at Updating Status.
This has happened before, and all that was required was a clean
reinstall.
This time, I found several possible solutions in Maxtor's knowledge
base, particularily Answer 2352 - which notes that .NET 1 broke the
program. However, none fixed the problem, see below.
First, I uninstalled and reinstalled the Maxtor One Touch and
Retrospect Express HD. No change.
Next, I deleted the RBC file and all other files on the OneTouch II
drive and uninstalled/reinstalled the Maxtor and Retrospect Express HD
software again. Still did not work.
I then installed Maxtor's patch WIN_ReXHDOT2_DRVUP.EXE. That did not
help.
I reinstalled the Microsoft .NET 1.1 patch #885055, per Answer 2353.
Retrospect still hangs at updating status.
I resently installed version 2.0 of NET. Seems like the likely
suspect. Whatever it is, Retrospect Express HD is still hanging at the
updating status point.
What should I do now?
Quite possible that there is an issue related to the install of the v2.0
framework, but you unlikely to come up with a fix. Talk to EMC, they will
have to work with Microsoft.
-A
<le*****@yahoo.com> wrote in message
news:n4********************************@4ax.com... See Dantz forums for more reports of the same problems with .Net
version 2 and Retrospect.
http://forums.dantz.com/ubbthreads/s...b=5&o=&fpart=1
Quite a few posts at Dantz this morniing both I and "PMC" found that the
Dantz workaround of intstalliing OEM Retrospect Express would not work
because it could not connect to the USB attached Maxtor OneTouch II. See http://forums.dantz.com/ubbthreads/s...rev=#Post63554
It looks like the fix is uninstall .NET v. 2 and Dantz Retrospect 6. Then,
install Retrospect Express HD. WHAT A GOAT ROPE!
"Andrew Robinson" wrote: Quite possible that there is an issue related to the install of the v2.0
framework, but you unlikely to come up with a fix. Talk to EMC, they will
have to work with Microsoft.
-A
<le*****@yahoo.com> wrote in message
news:n4********************************@4ax.com... See Dantz forums for more reports of the same problems with .Net
version 2 and Retrospect.
http://forums.dantz.com/ubbthreads/s...b=5&o=&fpart=1
Tell me about it!! This is PMC from Dantz groups.
--
Peter
Toronto, Canada
P4 dual HT @ 3.0ghz, 2.0gb DDR, 360gb HDD
"Leroy" <Le***@discussions.microsoft.com> wrote in message
news:C9**********************************@microsof t.com... Quite a few posts at Dantz this morniing both I and "PMC" found that the
Dantz workaround of intstalliing OEM Retrospect Express would not work
because it could not connect to the USB attached Maxtor OneTouch II. See
http://forums.dantz.com/ubbthreads/s...rev=#Post63554
It looks like the fix is uninstall .NET v. 2 and Dantz Retrospect 6.
Then,
install Retrospect Express HD. WHAT A GOAT ROPE!
"Andrew Robinson" wrote:
Quite possible that there is an issue related to the install of the v2.0
framework, but you unlikely to come up with a fix. Talk to EMC, they will
have to work with Microsoft.
-A
<le*****@yahoo.com> wrote in message
news:n4********************************@4ax.com... > See Dantz forums for more reports of the same problems with .Net
> version 2 and Retrospect.
> http://forums.dantz.com/ubbthreads/s...b=5&o=&fpart=1
See http://forums.dantz.com/ubbthreads/s...b=5&o=&fpart=1
A fix is forecoming from Dantz.
"Peter" wrote: Tell me about it!! This is PMC from Dantz groups.
--
Peter
Toronto, Canada
P4 dual HT @ 3.0ghz, 2.0gb DDR, 360gb HDD
"Leroy" <Le***@discussions.microsoft.com> wrote in message
news:C9**********************************@microsof t.com... Quite a few posts at Dantz this morniing both I and "PMC" found that the
Dantz workaround of intstalliing OEM Retrospect Express would not work
because it could not connect to the USB attached Maxtor OneTouch II. See
http://forums.dantz.com/ubbthreads/s...rev=#Post63554
It looks like the fix is uninstall .NET v. 2 and Dantz Retrospect 6.
Then,
install Retrospect Express HD. WHAT A GOAT ROPE!
"Andrew Robinson" wrote:
Quite possible that there is an issue related to the install of the v2.0
framework, but you unlikely to come up with a fix. Talk to EMC, they will
have to work with Microsoft.
-A
<le*****@yahoo.com> wrote in message
news:n4********************************@4ax.com...
> See Dantz forums for more reports of the same problems with .Net
> version 2 and Retrospect.
> http://forums.dantz.com/ubbthreads/s...b=5&o=&fpart=1
I saw that. Thanks.
--
Peter
Toronto, Canada
P4 dual HT @ 3.0ghz, 2.0gb DDR, 360gb HDD
"Leroy" <Le***@discussions.microsoft.com> wrote in message
news:D8**********************************@microsof t.com... See
http://forums.dantz.com/ubbthreads/s...b=5&o=&fpart=1
A fix is forecoming from Dantz.
"Peter" wrote:
Tell me about it!! This is PMC from Dantz groups.
--
Peter
Toronto, Canada
P4 dual HT @ 3.0ghz, 2.0gb DDR, 360gb HDD
"Leroy" <Le***@discussions.microsoft.com> wrote in message
news:C9**********************************@microsof t.com... > Quite a few posts at Dantz this morniing both I and "PMC" found that
> the
> Dantz workaround of intstalliing OEM Retrospect Express would not work
> because it could not connect to the USB attached Maxtor OneTouch II.
> See
> http://forums.dantz.com/ubbthreads/s...rev=#Post63554
> It looks like the fix is uninstall .NET v. 2 and Dantz Retrospect 6.
> Then,
> install Retrospect Express HD. WHAT A GOAT ROPE!
>
>
> "Andrew Robinson" wrote:
>
>> Quite possible that there is an issue related to the install of the
>> v2.0
>> framework, but you unlikely to come up with a fix. Talk to EMC, they
>> will
>> have to work with Microsoft.
>>
>> -A
>>
>>
>> <le*****@yahoo.com> wrote in message
>> news:n4********************************@4ax.com...
>> > See Dantz forums for more reports of the same problems with .Net
>> > version 2 and Retrospect.
>> > http://forums.dantz.com/ubbthreads/s...b=5&o=&fpart=1
>>
>>
>>
Dantz posts a fix. It is NOT compatible. You must uninstall .NET 2, see http://kb.dantz.com/display/2/search...ds&r=0.7285578
So much for .NET 2.
"Peter" wrote: I saw that. Thanks.
--
Peter
Toronto, Canada
P4 dual HT @ 3.0ghz, 2.0gb DDR, 360gb HDD
"Leroy" <Le***@discussions.microsoft.com> wrote in message
news:D8**********************************@microsof t.com... See
http://forums.dantz.com/ubbthreads/s...b=5&o=&fpart=1
A fix is forecoming from Dantz.
"Peter" wrote:
Tell me about it!! This is PMC from Dantz groups.
--
Peter
Toronto, Canada
P4 dual HT @ 3.0ghz, 2.0gb DDR, 360gb HDD
"Leroy" <Le***@discussions.microsoft.com> wrote in message
news:C9**********************************@microsof t.com...
> Quite a few posts at Dantz this morniing both I and "PMC" found that
> the
> Dantz workaround of intstalliing OEM Retrospect Express would not work
> because it could not connect to the USB attached Maxtor OneTouch II.
> See
> http://forums.dantz.com/ubbthreads/s...rev=#Post63554
> It looks like the fix is uninstall .NET v. 2 and Dantz Retrospect 6.
> Then,
> install Retrospect Express HD. WHAT A GOAT ROPE!
>
>
> "Andrew Robinson" wrote:
>
>> Quite possible that there is an issue related to the install of the
>> v2.0
>> framework, but you unlikely to come up with a fix. Talk to EMC, they
>> will
>> have to work with Microsoft.
>>
>> -A
>>
>>
>> <le*****@yahoo.com> wrote in message
>> news:n4********************************@4ax.com...
>> > See Dantz forums for more reports of the same problems with .Net
>> > version 2 and Retrospect.
>> > http://forums.dantz.com/ubbthreads/s...b=5&o=&fpart=1
>>
>>
>>
That's nothing new. They have said on the Dantz Forum that they are working
on a patch for .net 2.0
--
Peter
Toronto, Canada
P4 dual HT @ 3.0ghz, 2.0gb DDR, 360gb HDD
"Leroy" <Le***@discussions.microsoft.com> wrote in message
news:7E**********************************@microsof t.com... Dantz posts a fix. It is NOT compatible. You must uninstall .NET 2,
see
http://kb.dantz.com/display/2/search...ds&r=0.7285578
So much for .NET 2.
"Peter" wrote:
I saw that. Thanks.
--
Peter
Toronto, Canada
P4 dual HT @ 3.0ghz, 2.0gb DDR, 360gb HDD
"Leroy" <Le***@discussions.microsoft.com> wrote in message
news:D8**********************************@microsof t.com... > See
> http://forums.dantz.com/ubbthreads/s...b=5&o=&fpart=1
> A fix is forecoming from Dantz.
>
>
> "Peter" wrote:
>
>> Tell me about it!! This is PMC from Dantz groups.
>>
>> --
>> Peter
>> Toronto, Canada
>> P4 dual HT @ 3.0ghz, 2.0gb DDR, 360gb HDD
>> "Leroy" <Le***@discussions.microsoft.com> wrote in message
>> news:C9**********************************@microsof t.com...
>> > Quite a few posts at Dantz this morniing both I and "PMC" found that
>> > the
>> > Dantz workaround of intstalliing OEM Retrospect Express would not
>> > work
>> > because it could not connect to the USB attached Maxtor OneTouch II.
>> > See
>> > http://forums.dantz.com/ubbthreads/s...rev=#Post63554
>> > It looks like the fix is uninstall .NET v. 2 and Dantz Retrospect 6.
>> > Then,
>> > install Retrospect Express HD. WHAT A GOAT ROPE!
>> >
>> >
>> > "Andrew Robinson" wrote:
>> >
>> >> Quite possible that there is an issue related to the install of the
>> >> v2.0
>> >> framework, but you unlikely to come up with a fix. Talk to EMC,
>> >> they
>> >> will
>> >> have to work with Microsoft.
>> >>
>> >> -A
>> >>
>> >>
>> >> <le*****@yahoo.com> wrote in message
>> >> news:n4********************************@4ax.com...
>> >> > See Dantz forums for more reports of the same problems with .Net
>> >> > version 2 and Retrospect.
>> >> > http://forums.dantz.com/ubbthreads/s...b=5&o=&fpart=1
>> >>
>> >>
>> >>
>>
>>
>>
Just recently installed Maxtor One Touch II and Dantz Retrospect Express HD
and had same problem during first back-up try. I set my PC running XP Home to
"never stand-by" and "never hibernate" and backups worked fine. My problem is
with Dantz Retrospect; it causes IE Explorer to bog way way down or even
hang. Disabled Dantz from starting (2 apps) and IE Explorer works fine. My
default browser is Firefox. Just recently updated .NET
--
Miseris Succurrere Disco
CHNAP
"le*****@yahoo.com" wrote: Some history,
I have a Maxtor OneTouch II USB 2 backup drive with Retrospect Express
HD.
I recently found that Retrospect Express HD hangs at Updating Status.
This has happened before, and all that was required was a clean
reinstall.
This time, I found several possible solutions in Maxtor's knowledge
base, particularily Answer 2352 - which notes that .NET 1 broke the
program. However, none fixed the problem, see below.
First, I uninstalled and reinstalled the Maxtor One Touch and
Retrospect Express HD. No change.
Next, I deleted the RBC file and all other files on the OneTouch II
drive and uninstalled/reinstalled the Maxtor and Retrospect Express HD
software again. Still did not work.
I then installed Maxtor's patch WIN_ReXHDOT2_DRVUP.EXE. That did not
help.
I reinstalled the Microsoft .NET 1.1 patch #885055, per Answer 2353.
Retrospect still hangs at updating status.
I resently installed version 2.0 of NET. Seems like the likely
suspect. Whatever it is, Retrospect Express HD is still hanging at the
updating status point.
What should I do now?
Had the same problem and tried all suggested solutions. Finally Maxtor
Help advised me to install Retrospect 6 which is hidden away on the
installation CD. Did that and it runs fine. I don't know what I'm
missing by not having Retrospect HD but back up is working now
*** Sent via Developersdex http://www.developersdex.com *** This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics
by: lawrence |
last post by:
I asked a lot of questions in May about how to organize OO code. I
didn't get great answers here, but someone here suggested that I look
the Eclipse library, which was a good tip. Looking at its...
|
by: M. Laymon |
last post by:
I just installed Python 2.3.3 under Windows XP professional. After I
did, my wife tried to access her email using Outlook Express and got
the error messages:
Your server has unexpectedly...
|
by: intl04 |
last post by:
I have a memo field that is included in some Access reports I created.
Is there some way for the memo field to display nicely formatted text,
with line breaks between paragraphs? Or is it necessary...
|
by: Andy Heitke |
last post by:
My problem is similar to the thread entited, "SP2 kills my AxWebBrowser"
except that I haven't been able to get the fixes to work for me.
I've written an application that uses an embedded...
|
by: Mike |
last post by:
I need my textbox to work more smoothly with respect to line breaks.
When I have data pulled from the database into a textbox there are hard
line breaks at the end of each line (by definition how...
|
by: John R. Lewis |
last post by:
I posted this yesterday with a different email address. I am reposting with
my fake-address as given to me by Microsoft so that I can be guraranteed a
response from a support representative. Sorry...
|
by: Evie |
last post by:
I understand that when a switch statement is used without breaks, the
code continues executing even after a matching case is found. Why,
though, are subsequent cases not evaluated?
I wrote a...
|
by: joelbyrd |
last post by:
Didn't know exactly where to post this, but: How do I get line breaks
in a textarea? I'm pulling text from a database, and this text
definately has line breaks in it, because I
replaced all the...
|
by: EnjoyNews |
last post by:
Hi
I have a little probelm.
I tranfer som data from input fields to a div so you can see how a profil
will look as you type in your data.
I just put this in my input field:...
|
by: Charles Arthur |
last post by:
How do i turn on java script on a villaon, callus and itel keypad mobile phone
|
by: ryjfgjl |
last post by:
If we have dozens or hundreds of excel to import into the database, if we use the excel import function provided by database editors such as navicat, it will be extremely tedious and time-consuming...
|
by: ryjfgjl |
last post by:
In our work, we often receive Excel tables with data in the same format. If we want to analyze these data, it can be difficult to analyze them because the data is spread across multiple Excel files...
|
by: BarryA |
last post by:
What are the essential steps and strategies outlined in the Data Structures and Algorithms (DSA) roadmap for aspiring data scientists? How can individuals effectively utilize this roadmap to progress...
|
by: Sonnysonu |
last post by:
This is the data of csv file
1 2 3
1 2 3
1 2 3
1 2 3
2 3
2 3
3
the lengths should be different i have to store the data by column-wise with in the specific length.
suppose the i have to...
|
by: Hystou |
last post by:
There are some requirements for setting up RAID:
1. The motherboard and BIOS support RAID configuration.
2. The motherboard has 2 or more available SATA protocol SSD/HDD slots (including MSATA, M.2...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However,...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers,...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows...
| |
