Hi,
I need to be able to to disable the Apend Row feature of the VB.NET
datagrid and then enable it again. The reason is because I want to
allow a user to enter as many rows in the datagrid as they want until a
certain number of rows is reached. When that number of rows is reached
I want to disable the Apend Row feature - BUT if they delete a row, I
want to enable the Apend Row feature again. Does that make sense??
I have code that works great to disable the Apend Row feature - but
when I use the same method to enable it again, it doesn't work - it
doesn't produce an error but it just doesn't enable Apend Row feature
again. Here is the code I am using to disable the Apend Row feature:
Dim cm As CurrencyManager = Me.BindingContext(dgTime.DataSource)
CType(cm.List, DataView).AllowNew = False
CType(cm.List, DataView).AllowDelete = True
Here is the code I am using to try to enable it again:
Dim cm As CurrencyManager = Me.BindingContext(dgTime.DataSource)
CType(cm.List, DataView).AllowNew = True
CType(cm.List, DataView).AllowDelete = True
This code does succesfully set CType(cm.List, DataView).AllowNew = True
but the option to type information into a blank row in the datagrid
never appears.
Can anyone help me??
Thanks!
Joy
4  2073 
You use two instants, the object is different, try to make one instant.
Dim cm As CurrencyManager = Me.BindingContext(dgTime.DataSource)
and just call this object with new setup, may solve your problem.
Good luck
Tony
"Joy" <si***********@yahoo.com> wrote in message
news:11**********************@c13g2000cwb.googlegr oups.com... Hi,
I need to be able to to disable the Apend Row feature of the VB.NET
datagrid and then enable it again. The reason is because I want to
allow a user to enter as many rows in the datagrid as they want until a
certain number of rows is reached. When that number of rows is reached
I want to disable the Apend Row feature - BUT if they delete a row, I
want to enable the Apend Row feature again. Does that make sense??
I have code that works great to disable the Apend Row feature - but
when I use the same method to enable it again, it doesn't work - it
doesn't produce an error but it just doesn't enable Apend Row feature
again. Here is the code I am using to disable the Apend Row feature:
Dim cm As CurrencyManager = Me.BindingContext(dgTime.DataSource)
CType(cm.List, DataView).AllowNew = False
CType(cm.List, DataView).AllowDelete = True
Here is the code I am using to try to enable it again:
Dim cm As CurrencyManager = Me.BindingContext(dgTime.DataSource)
CType(cm.List, DataView).AllowNew = True
CType(cm.List, DataView).AllowDelete = True
This code does succesfully set CType(cm.List, DataView).AllowNew = True
but the option to type information into a blank row in the datagrid
never appears.
Can anyone help me??
Thanks!
Joy
Let me see if I understand you correctly, are you saying I should
create only one instance of cm, the CurrencyManager??
Joy
When are you making the method call? You say that you are using the same
method to enable and disable the new row feature, but from where is the
method being called for
"Joy" wrote: Hi,
I need to be able to to disable the Apend Row feature of the VB.NET
datagrid and then enable it again. The reason is because I want to
allow a user to enter as many rows in the datagrid as they want until a
certain number of rows is reached. When that number of rows is reached
I want to disable the Apend Row feature - BUT if they delete a row, I
want to enable the Apend Row feature again. Does that make sense??
I have code that works great to disable the Apend Row feature - but
when I use the same method to enable it again, it doesn't work - it
doesn't produce an error but it just doesn't enable Apend Row feature
again. Here is the code I am using to disable the Apend Row feature:
Dim cm As CurrencyManager = Me.BindingContext(dgTime.DataSource)
CType(cm.List, DataView).AllowNew = False
CType(cm.List, DataView).AllowDelete = True
Here is the code I am using to try to enable it again:
Dim cm As CurrencyManager = Me.BindingContext(dgTime.DataSource)
CType(cm.List, DataView).AllowNew = True
CType(cm.List, DataView).AllowDelete = True
This code does succesfully set CType(cm.List, DataView).AllowNew = True
but the option to type information into a blank row in the datagrid
never appears.
Can anyone help me??
Thanks!
Joy
I use the same code I last posted everywhere I need to set the AllowNew,
or AllowDelete properties of the DataView. Perhaps part of the problem
is that I am using it repeatedly in so many places - perhaps I should
just do it in one place - but is that what you are suggesting?
Joy
*** Sent via Developersdex http://www.developersdex.com ***
Don't just participate in USENET...get rewarded for it! This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics
by: Ashish Shridharan |
last post by:
Hi All
I have been trying to add a control to the header cell of
a datagrid on my ASP.NET page. These controls are defined
in the HTML as ASP.NET web controls.
They are being added into the...
|
by: Joy |
last post by:
Hi,
I need to be able to to disable the Apend Row feature of the VB.NET
datagrid and then enable it again. The reason is because I want to
allow a user to enter as many rows in the datagrid as...
|
by: Bill C. |
last post by:
Hello,
I know this has been discussed a lot already because I've been searching
around for information the last few weeks.
I'm trying to implement a DataGridComboBoxColumn class. I've found...
|
by: BBFrost |
last post by:
Win2000
..Net 1.1 SP1
c# using Visual Studio
Ok, I'm currently in a "knock down - drag out" tussle with the .Net 1.1
datagrid.
I've come to realize that a 'block' of rows highlighted within...
|
by: pei_world |
last post by:
I want to implement a key hit with enter to dropdown a combobox that is in
the datagrid. in this case I need to override its original behaviours. I
found some codes from the web. Does anyone know...
|
by: mgenti |
last post by:
I am experiencing a problem when I add a row to a DataTable that is
used on a DataGrid in my Windows Form application. When I add a new
row I no longer get a response from my form. I see the row...
|
by: Rick |
last post by:
Hello all, I hope all is well with you.
I am having a seriously difficult time with this problem. Allow me to
set
up the problem.
I have a System.Web.UI.Page with the following controls...
|
by: CSL |
last post by:
I am using the DataGrid in a Windows Application, how can
I adjust the widths of each column individually.
|
by: Dave |
last post by:
Are there any add-on products or samples available that can do the following
in an vb.net datagrid
I want to compare 2 rows in a datagrid - one row from one database and
another row for another...
|
by: perhapscwk |
last post by:
Currently, my code is alright if I just need to add a new line the end of
the line. First, my code to clone the second and third tr from the table,
then add the clone line the end of list.
But ...
|
by: CloudSolutions |
last post by:
Introduction:
For many beginners and individual users, requiring a credit card and email registration may pose a barrier when starting to use cloud servers. However, some cloud server providers now...
|
by: Faith0G |
last post by:
I am starting a new it consulting business and it's been a while since I setup a new website. Is wordpress still the best web based software for hosting a 5 page website? The webpages will be...
|
by: ryjfgjl |
last post by:
In our work, we often need to import Excel data into databases (such as MySQL, SQL Server, Oracle) for data analysis and processing. Usually, we use database tools like Navicat or the Excel import...
|
by: taylorcarr |
last post by:
A Canon printer is a smart device known for being advanced, efficient, and reliable. It is designed for home, office, and hybrid workspace use and can also be used for a variety of purposes. However,...
|
by: aa123db |
last post by:
Variable and constants
Use var or let for variables and const fror constants.
Var foo ='bar';
Let foo ='bar';const baz ='bar';
Functions
function $name$ ($parameters$) {
}
...
|
by: emmanuelkatto |
last post by:
Hi All, I am Emmanuel katto from Uganda. I want to ask what challenges you've faced while migrating a website to cloud.
Please let me know.
Thanks!
Emmanuel
|
by: nemocccc |
last post by:
hello, everyone, I want to develop a software for my android phone for daily needs, any suggestions?
|
by: Sonnysonu |
last post by:
This is the data of csv file
1 2 3
1 2 3
1 2 3
1 2 3
2 3
2 3
3
the lengths should be different i have to store the data by column-wise with in the specific length.
suppose the i have to...
|
by: Hystou |
last post by:
There are some requirements for setting up RAID:
1. The motherboard and BIOS support RAID configuration.
2. The motherboard has 2 or more available SATA protocol SSD/HDD slots (including MSATA, M.2...
| |
