Whe i'm running my .net aplication from share on other server, i've got an
error. Can someone explain what i must do?
Unhandle exception:System.Security.SecurityException: Permission demand type
System.Security.Permissions.EnvironmentPermission, mscorlib,
Version=1.0.5000.
0, Culture=neutral, PublicKeyToken=b77a5c561934e089 not succed.
at System.Security.CodeAccessSecurityEngine.CheckHelp er(PermissionSet
granted
Set, PermissionSet deniedSet, CodeAccessPermission demand, PermissionToken
permT
oken)
at System.Security.CodeAccessSecurityEngine.Check(Per missionToken
permToken,
CodeAccessPermission demand, StackCrawlMark& stackMark, Int32 checkFrames,
Int32
unrestrictedOverride)
at System.Security.CodeAccessSecurityEngine.Check(Cod eAccessPermission
cap, S
tackCrawlMark& stackMark)
at System.Security.CodeAccessPermission.Demand()
at System.Environment.GetCommandLineArgs()
at KANA_Szperacz.Module1.Main()
Permission state, which wans't granted:
<IPermission class="System.Security.Permissions.EnvironmentPerm ission,
mscorlib
Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
version="1"
Read="Path"/> 7 2795
This is the Code Access Security engine kicking in.
CAS don't really care who you are, just where your code runs from (or
who published the code). Since the share is considered a part of the
LocalIntranet Zone, it's blocked from doing certain operations.
CAS is configured in the .NET Configuraion tool (Administrative
tools->.NET Configuration).
What you need to do is to give your location better permissions. The key
to that is creating a new Code Group that matches your location.
--
Patrik Löwendahl [C# MVP]
cshrp.net - 'Elegant code by witty programmers'
cornerstone.se 'IT Training for professionals'
Marek wrote: Whe i'm running my .net aplication from share on other server, i've got an error. Can someone explain what i must do?
Unhandle exception:System.Security.SecurityException: Permission demand type System.Security.Permissions.EnvironmentPermission, mscorlib, Version=1.0.5000. 0, Culture=neutral, PublicKeyToken=b77a5c561934e089 not succed. at System.Security.CodeAccessSecurityEngine.CheckHelp er(PermissionSet granted Set, PermissionSet deniedSet, CodeAccessPermission demand, PermissionToken permT oken) at System.Security.CodeAccessSecurityEngine.Check(Per missionToken permToken, CodeAccessPermission demand, StackCrawlMark& stackMark, Int32 checkFrames, Int32 unrestrictedOverride) at System.Security.CodeAccessSecurityEngine.Check(Cod eAccessPermission cap, S tackCrawlMark& stackMark) at System.Security.CodeAccessPermission.Demand() at System.Environment.GetCommandLineArgs() at KANA_Szperacz.Module1.Main()
Permission state, which wans't granted: <IPermission class="System.Security.Permissions.EnvironmentPerm ission, mscorlib Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Read="Path"/>
Hi Marek...
This is because the default security policy of the CLR is to grant only
partial trust to any code that originates from a network location. In other
words, by default your application is only fully trusted if it originates
from a hard drive location in your local system. When partially trusted code
attempts an action that it is not permitted to perform, the results are which
you got ...a SecurityException.
You need to give "FULL" right to your application....
HTH
With Best Regards
Naveen K S
"Marek" wrote: Whe i'm running my .net aplication from share on other server, i've got an error. Can someone explain what i must do?
Unhandle exception:System.Security.SecurityException: Permission demand type System.Security.Permissions.EnvironmentPermission, mscorlib, Version=1.0.5000. 0, Culture=neutral, PublicKeyToken=b77a5c561934e089 not succed. at System.Security.CodeAccessSecurityEngine.CheckHelp er(PermissionSet granted Set, PermissionSet deniedSet, CodeAccessPermission demand, PermissionToken permT oken) at System.Security.CodeAccessSecurityEngine.Check(Per missionToken permToken, CodeAccessPermission demand, StackCrawlMark& stackMark, Int32 checkFrames, Int32 unrestrictedOverride) at System.Security.CodeAccessSecurityEngine.Check(Cod eAccessPermission cap, S tackCrawlMark& stackMark) at System.Security.CodeAccessPermission.Demand() at System.Environment.GetCommandLineArgs() at KANA_Szperacz.Module1.Main()
Permission state, which wans't granted: <IPermission class="System.Security.Permissions.EnvironmentPerm ission, mscorlib Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Read="Path"/>
This aplication is on one server in our LAN. I'm running it from my station.
I have full access permission at server and at my station (local
administrator).
Użytkownik "Naveen" <Na****@discussions.microsoft.com> napisał w wiadomości
news:4B**********************************@microsof t.com... Hi Marek...
This is because the default security policy of the CLR is to grant only partial trust to any code that originates from a network location. In other words, by default your application is only fully trusted if it originates from a hard drive location in your local system. When partially trusted code attempts an action that it is not permitted to perform, the results are which you got ...a SecurityException.
You need to give "FULL" right to your application....
HTH
With Best Regards Naveen K S
"Marek" wrote:
Whe i'm running my .net aplication from share on other server, i've got an error. Can someone explain what i must do?
Unhandle exception:System.Security.SecurityException: Permission demand type System.Security.Permissions.EnvironmentPermission, mscorlib, Version=1.0.5000. 0, Culture=neutral, PublicKeyToken=b77a5c561934e089 not succed. at System.Security.CodeAccessSecurityEngine.CheckHelp er(PermissionSet granted Set, PermissionSet deniedSet, CodeAccessPermission demand, PermissionToken permT oken) at System.Security.CodeAccessSecurityEngine.Check(Per missionToken permToken, CodeAccessPermission demand, StackCrawlMark& stackMark, Int32 checkFrames, Int32 unrestrictedOverride) at System.Security.CodeAccessSecurityEngine.Check(Cod eAccessPermission cap, S tackCrawlMark& stackMark) at System.Security.CodeAccessPermission.Demand() at System.Environment.GetCommandLineArgs() at KANA_Szperacz.Module1.Main()
Permission state, which wans't granted: <IPermission class="System.Security.Permissions.EnvironmentPerm ission, mscorlib Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Read="Path"/>
Marek,
as I replied in my previous post, .NET security doesn't care what
permmissions you as a user has, it only care about what permission the
code itself has. When running from a Lan - server the code is'nt granted
to many permissions.
--
Patrik Löwendahl [C# MVP]
cshrp.net - 'Elegant code by witty programmers'
cornerstone.se 'IT Training for professionals'
Marek wrote: This aplication is on one server in our LAN. I'm running it from my station. I have full access permission at server and at my station (local administrator).
Użytkownik "Naveen" <Na****@discussions.microsoft.com> napisał w wiadomości news:4B**********************************@microsof t.com...
Hi Marek...
This is because the default security policy of the CLR is to grant only partial trust to any code that originates from a network location. In other words, by default your application is only fully trusted if it originates from a hard drive location in your local system. When partially trusted code attempts an action that it is not permitted to perform, the results are which you got ...a SecurityException.
You need to give "FULL" right to your application....
HTH
With Best Regards Naveen K S
"Marek" wrote:
Whe i'm running my .net aplication from share on other server, i've got an error. Can someone explain what i must do?
Unhandle exception:System.Security.SecurityException: Permission demand type System.Security.Permissions.EnvironmentPermissi on, mscorlib, Version=1.0.5000. 0, Culture=neutral, PublicKeyToken=b77a5c561934e089 not succed. at System.Security.CodeAccessSecurityEngine.CheckHelp er(PermissionSet granted Set, PermissionSet deniedSet, CodeAccessPermission demand, PermissionToken permT oken) at System.Security.CodeAccessSecurityEngine.Check(Per missionToken permToken, CodeAccessPermission demand, StackCrawlMark& stackMark, Int32 checkFrames, Int32 unrestrictedOverride) at System.Security.CodeAccessSecurityEngine.Check(Cod eAccessPermission cap, S tackCrawlMark& stackMark) at System.Security.CodeAccessPermission.Demand() at System.Environment.GetCommandLineArgs() at KANA_Szperacz.Module1.Main()
Permission state, which wans't granted: <IPermission class="System.Security.Permissions.EnvironmentPerm ission, mscorlib Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Read="Path"/>
Can you show me, where i can find this tools?
Or where i can set privilages for my aplication?
Uzytkownik ""Patrik Löwendahl [C# MVP]""
<pa******************************@home.se> napisal w wiadomosci
news:uL**************@TK2MSFTNGP10.phx.gbl... Marek,
as I replied in my previous post, .NET security doesn't care what permmissions you as a user has, it only care about what permission the code itself has. When running from a Lan - server the code is'nt granted to many permissions.
-- Patrik Löwendahl [C# MVP] cshrp.net - 'Elegant code by witty programmers' cornerstone.se 'IT Training for professionals'
Marek wrote: This aplication is on one server in our LAN. I'm running it from my station. I have full access permission at server and at my station (local administrator).
Użytkownik "Naveen" <Na****@discussions.microsoft.com> napisał w wiadomości news:4B**********************************@microsof t.com...
Hi Marek...
This is because the default security policy of the CLR is to grant only partial trust to any code that originates from a network location. In other words, by default your application is only fully trusted if it originates from a hard drive location in your local system. When partially trusted code attempts an action that it is not permitted to perform, the results are which you got ...a SecurityException.
You need to give "FULL" right to your application....
HTH
With Best Regards Naveen K S
"Marek" wrote:
Whe i'm running my .net aplication from share on other server, i've got an error. Can someone explain what i must do?
Unhandle exception:System.Security.SecurityException: Permission demand type System.Security.Permissions.EnvironmentPermiss ion, mscorlib, Version=1.0.5000. 0, Culture=neutral, PublicKeyToken=b77a5c561934e089 not succed. at System.Security.CodeAccessSecurityEngine.CheckHelp er(PermissionSet granted Set, PermissionSet deniedSet, CodeAccessPermission demand, PermissionToken permT oken) at System.Security.CodeAccessSecurityEngine.Check(Per missionToken permToken, CodeAccessPermission demand, StackCrawlMark& stackMark, Int32 checkFrames, Int32 unrestrictedOverride) at System.Security.CodeAccessSecurityEngine.Check(Cod eAccessPermission cap, S tackCrawlMark& stackMark) at System.Security.CodeAccessPermission.Demand() at System.Environment.GetCommandLineArgs() at KANA_Szperacz.Module1.Main()
Permission state, which wans't granted: <IPermission class="System.Security.Permissions.EnvironmentPerm ission, mscorlib Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Read="Path"/>
Marek wrote: Can you show me, where i can find this tools? Or where i can set privilages for my aplication?
Uzytkownik ""Patrik Löwendahl [C# MVP]"" <pa******************************@home.se> napisal w wiadomosci news:uL**************@TK2MSFTNGP10.phx.gbl...
Marek,
as I replied in my previous post, .NET security doesn't care what permmissions you as a user has, it only care about what permission the code itself has. When running from a Lan - server the code is'nt granted to many permissions.
-- Patrik Löwendahl [C# MVP] cshrp.net - 'Elegant code by witty programmers' cornerstone.se 'IT Training for professionals'
Marek wrote:
This aplication is on one server in our LAN. I'm running it from my station. I have full access permission at server and at my station (local administrator).
Użytkownik "Naveen" <Na****@discussions.microsoft.com> napisał w wiadomości news:4B**********************************@microsof t.com...
Hi Marek...
This is because the default security policy of the CLR is to grant only partial trust to any code that originates from a network location. In other words, by default your application is only fully trusted if it originates
from a hard drive location in your local system. When partially trusted
code attempts an action that it is not permitted to perform, the results are which you got ...a SecurityException.
You need to give "FULL" right to your application....
HTH
With Best Regards Naveen K S
"Marek" wrote: >Whe i'm running my .net aplication from share on other server, i've got >an >error. Can someone explain what i must do? > >Unhandle exception:System.Security.SecurityException: Permission demand >type >System.Security.Permissions.EnvironmentPermis sion, mscorlib, >Version=1.0.5000. >0, Culture=neutral, PublicKeyToken=b77a5c561934e089 not succed. > at System.Security.CodeAccessSecurityEngine.CheckHelp er(PermissionSet >granted >Set, PermissionSet deniedSet, CodeAccessPermission demand, >PermissionToken >permT >oken) > at System.Security.CodeAccessSecurityEngine.Check(Per missionToken >permToken, >CodeAccessPermission demand, StackCrawlMark& stackMark, Int32 >checkFrames, >Int32 >unrestrictedOverride) > at >System.Security.CodeAccessSecurityEngine.Chec k(CodeAccessPermission >cap, S >tackCrawlMark& stackMark) > at System.Security.CodeAccessPermission.Demand() > at System.Environment.GetCommandLineArgs() > at KANA_Szperacz.Module1.Main() > >Permission state, which wans't granted: ><IPermission class="System.Security.Permissions.EnvironmentPerm ission, >mscorlib >Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" > version="1" > Read="Path"/> > > >
I'm interested in this too. Can it be set from a setup program (probably
not due to security issues). Or should I just include it in the manual
on how to set it using the .net framework configuration?
--
Rinze van Huizen
C-Services Holland b.v.
In my application i'm trying only to run program. It runs with parameter or
without it. In this option(running from share) it runs without. It has
config file, but in this option it don't use it.
There is only one function that runs gpresult.exe build in Windows.
I tried with .NET Configuration, but it still doesn't work....
Uzytkownik "C-Services Holland b.v." <cs*@REMOVEcsh4u.nl> napisal w
wiadomosci news:PO********************@zeelandnet.nl... Marek wrote:
Can you show me, where i can find this tools? Or where i can set privilages for my aplication?
Uzytkownik ""Patrik Löwendahl [C# MVP]"" <pa******************************@home.se> napisal w wiadomosci news:uL**************@TK2MSFTNGP10.phx.gbl...
Marek,
as I replied in my previous post, .NET security doesn't care what permmissions you as a user has, it only care about what permission the code itself has. When running from a Lan - server the code is'nt granted to many permissions.
-- Patrik Löwendahl [C# MVP] cshrp.net - 'Elegant code by witty programmers' cornerstone.se 'IT Training for professionals'
Marek wrote:
This aplication is on one server in our LAN. I'm running it from my station. I have full access permission at server and at my station (local administrator).
Użytkownik "Naveen" <Na****@discussions.microsoft.com> napisał w wiadomości news:4B**********************************@microsof t.com...
>Hi Marek... > >This is because the default security policy of the CLR is to grant only >partial trust to any code that originates from a network location. In >other >words, by default your application is only fully trusted if it >originates
>from a hard drive location in your local system. When partially trusted
>code >attempts an action that it is not permitted to perform, the results are >which >you got ...a SecurityException. > >You need to give "FULL" right to your application.... > >HTH > >With Best Regards >Naveen K S > >"Marek" wrote: > > > >>Whe i'm running my .net aplication from share on other server, i've >>got an >>error. Can someone explain what i must do? >> >>Unhandle exception:System.Security.SecurityException: Permission >>demand type >>System.Security.Permissions.EnvironmentPermi ssion, mscorlib, >>Version=1.0.5000. >>0, Culture=neutral, PublicKeyToken=b77a5c561934e089 not succed. >> at >> System.Security.CodeAccessSecurityEngine.CheckHelp er(PermissionSet >>granted >>Set, PermissionSet deniedSet, CodeAccessPermission demand, >>PermissionToken >>permT >>oken) >> at System.Security.CodeAccessSecurityEngine.Check(Per missionToken >>permToken, >>CodeAccessPermission demand, StackCrawlMark& stackMark, Int32 >>checkFrames, >>Int32 >>unrestrictedOverride) >> at >> System.Security.CodeAccessSecurityEngine.Check(Cod eAccessPermission >>cap, S >>tackCrawlMark& stackMark) >> at System.Security.CodeAccessPermission.Demand() >> at System.Environment.GetCommandLineArgs() >> at KANA_Szperacz.Module1.Main() >> >>Permission state, which wans't granted: >><IPermission class="System.Security.Permissions.EnvironmentPerm ission, >>mscorlib >>Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >> version="1" >> Read="Path"/> >> >> >>
I'm interested in this too. Can it be set from a setup program (probably not due to security issues). Or should I just include it in the manual on how to set it using the .net framework configuration?
-- Rinze van Huizen C-Services Holland b.v. This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics
by: Michael Schmitt |
last post by:
Hello.
What is the usual way for running functions in parallel on a
multiple-processor machine. Actually I want to run a single computationally
expensive function with different parameter sets....
|
by: Chung Ley |
last post by:
Hi
I am having problem running an .net application on a Windows2000 Terminal Server. The application seems to work fine on user's desktop
The issues that I have with running the application on...
|
by: Marek |
last post by:
Whe i'm running my .net aplication from share on other server, i've got an
error. Can someone explain what i must do?
Unhandle exception:System.Security.SecurityException: Permission demand type...
|
by: David Olive |
last post by:
Hi guys,
I'm having a bit of a problem getting a VB .NET console app to run happily
as a scheduled task. The app itself generates a bunch of word documents on a
file share on another server by...
|
by: Gabriel Mejía |
last post by:
Services or applications using ActiveX Data Objects (ADO) 2.0 or greater may
intermittently return empty recordsets on queries that should be returning
valid results. At the time the problem...
|
by: nickdu |
last post by:
I'm trying to isolate "applications" into their own application domain within
a single process. I've quoted applications because it's a logical
representation of an application. Basically it...
|
by: ASP.NET User |
last post by:
Hi
I am in a shop where developers are required to work off of a networ
share. This is so that code and other documentation is backed up nightly. This is outside the realm of Visual SourceSafe...
|
by: Jeremy S. |
last post by:
We're in the process of writing a new Windows Forms app and the desktop
support folks want for it to be run from a network share. I know it's
possible (i.e., just have the framework on the clients...
|
by: fanor |
last post by:
I have a windows aplication and i would like to send email.
Does anyone one know what is the yahoo server???
TIA
PD: my aplication is in VS 2005 and c#.
|
by: Peter Michaux |
last post by:
I'm writing a server-side web application framework using Mozilla's
Rhino JavaScript engine. My two primary motivations are so I can write
code on server and client sides without needing to switch...
|
by: DolphinDB |
last post by:
Tired of spending countless mintues downsampling your data? Look no further!
In this article, youll learn how to efficiently downsample 6.48 billion high-frequency records to 61 million...
|
by: isladogs |
last post by:
The next Access Europe meeting will be on Wednesday 6 Mar 2024 starting at 18:00 UK time (6PM UTC) and finishing at about 19:15 (7.15PM).
In this month's session, we are pleased to welcome back...
|
by: isladogs |
last post by:
The next Access Europe meeting will be on Wednesday 6 Mar 2024 starting at 18:00 UK time (6PM UTC) and finishing at about 19:15 (7.15PM).
In this month's session, we are pleased to welcome back...
|
by: Vimpel783 |
last post by:
Hello!
Guys, I found this code on the Internet, but I need to modify it a little. It works well, the problem is this: Data is sent from only one cell, in this case B5, but it is necessary that data...
|
by: PapaRatzi |
last post by:
Hello,
I am teaching myself MS Access forms design and Visual Basic. I've created a table to capture a list of Top 30 singles and forms to capture new entries. The final step is a form (unbound)...
|
by: CloudSolutions |
last post by:
Introduction:
For many beginners and individual users, requiring a credit card and email registration may pose a barrier when starting to use cloud servers. However, some cloud server providers now...
|
by: Defcon1945 |
last post by:
I'm trying to learn Python using Pycharm but import shutil doesn't work
|
by: af34tf |
last post by:
Hi Guys, I have a domain whose name is BytesLimited.com, and I want to sell it. Does anyone know about platforms that allow me to list my domain in auction for free. Thank you
|
by: Faith0G |
last post by:
I am starting a new it consulting business and it's been a while since I setup a new website. Is wordpress still the best web based software for hosting a 5 page website? The webpages will be...
| |