Hi,
After installing Netware 6 sp3 (1 cd) and mysql 4.0.17, I try starting as
described in manual, but the following happens:
when loading: MY_SQL_INSTALLDB [enter]
The answer:
The database creation failed!
Resources not available (perhaps permanently)
see ...data\<servername>.log
(The log is created, but is empty )
On the load screen there is
loading module mysqld.nlm [UNRESOLVED]
Since the log is empty I do not have a clue, can You please give me one...
Thanks and merry Chrismas,
From Christian
6  2395 
I am having the exact same issue. Has anyone come across a fix yet??
Thanks,
RW
"Christian Krabbe" <no*****************@hotmail.com> wrote in message news:<3f***********************@nntp04.dk.telia.ne t>... Hi,
After installing Netware 6 sp3 (1 cd) and mysql 4.0.17, I try starting as
described in manual, but the following happens:
when loading: MY_SQL_INSTALLDB [enter]
The answer:
The database creation failed!
Resources not available (perhaps permanently)
see ...data\<servername>.log
(The log is created, but is empty )
On the load screen there is
loading module mysqld.nlm [UNRESOLVED]
Since the log is empty I do not have a clue, can You please give me one...
Thanks and merry Chrismas,
From Christian
I am having the exact same issue. Has anyone come across a fix yet??
Thanks,
RW
"Christian Krabbe" <no*****************@hotmail.com> wrote in message news:<3f***********************@nntp04.dk.telia.ne t>... Hi,
After installing Netware 6 sp3 (1 cd) and mysql 4.0.17, I try starting as
described in manual, but the following happens:
when loading: MY_SQL_INSTALLDB [enter]
The answer:
The database creation failed!
Resources not available (perhaps permanently)
see ...data\<servername>.log
(The log is created, but is empty )
On the load screen there is
loading module mysqld.nlm [UNRESOLVED]
Since the log is empty I do not have a clue, can You please give me one...
Thanks and merry Chrismas,
From Christian
I am having the exact same issue. Has anyone come across a fix yet??
Thanks,
RW
"Christian Krabbe" <no*****************@hotmail.com> wrote in message news:<3f***********************@nntp04.dk.telia.ne t>... Hi,
After installing Netware 6 sp3 (1 cd) and mysql 4.0.17, I try starting as
described in manual, but the following happens:
when loading: MY_SQL_INSTALLDB [enter]
The answer:
The database creation failed!
Resources not available (perhaps permanently)
see ...data\<servername>.log
(The log is created, but is empty )
On the load screen there is
loading module mysqld.nlm [UNRESOLVED]
Since the log is empty I do not have a clue, can You please give me one...
Thanks and merry Chrismas,
From Christian
Randy,
I had something similiar, and my problem was that the server I was
installing on was an upgraded server from NetWare 5.1 and had NetWare
Traditional Volumes. Once I changed the volume (using VCU) to an NSS volume
I was able to install and configure properly...
Have Fun,
Bob
"Randy Woods" <Ra*********@Earthlink.net> wrote in message
news:96**************************@posting.google.c om... I am having the exact same issue. Has anyone come across a fix yet??
Thanks,
RW
"Christian Krabbe" <no*****************@hotmail.com> wrote in message
news:<3f***********************@nntp04.dk.telia.ne t>... Hi,
After installing Netware 6 sp3 (1 cd) and mysql 4.0.17, I try starting
as described in manual, but the following happens:
when loading: MY_SQL_INSTALLDB [enter]
The answer:
The database creation failed!
Resources not available (perhaps permanently)
see ...data\<servername>.log
(The log is created, but is empty )
On the load screen there is
loading module mysqld.nlm [UNRESOLVED]
Since the log is empty I do not have a clue, can You please give me
one...
Thanks and merry Chrismas,
From Christian
Randy,
I had something similiar, and my problem was that the server I was
installing on was an upgraded server from NetWare 5.1 and had NetWare
Traditional Volumes. Once I changed the volume (using VCU) to an NSS volume
I was able to install and configure properly...
Have Fun,
Bob
"Randy Woods" <Ra*********@Earthlink.net> wrote in message
news:96**************************@posting.google.c om... I am having the exact same issue. Has anyone come across a fix yet??
Thanks,
RW
"Christian Krabbe" <no*****************@hotmail.com> wrote in message
news:<3f***********************@nntp04.dk.telia.ne t>... Hi,
After installing Netware 6 sp3 (1 cd) and mysql 4.0.17, I try starting
as described in manual, but the following happens:
when loading: MY_SQL_INSTALLDB [enter]
The answer:
The database creation failed!
Resources not available (perhaps permanently)
see ...data\<servername>.log
(The log is created, but is empty )
On the load screen there is
loading module mysqld.nlm [UNRESOLVED]
Since the log is empty I do not have a clue, can You please give me
one...
Thanks and merry Chrismas,
From Christian
Randy,
I had something similiar, and my problem was that the server I was
installing on was an upgraded server from NetWare 5.1 and had NetWare
Traditional Volumes. Once I changed the volume (using VCU) to an NSS volume
I was able to install and configure properly...
Have Fun,
Bob
"Randy Woods" <Ra*********@Earthlink.net> wrote in message
news:96**************************@posting.google.c om... I am having the exact same issue. Has anyone come across a fix yet??
Thanks,
RW
"Christian Krabbe" <no*****************@hotmail.com> wrote in message
news:<3f***********************@nntp04.dk.telia.ne t>... Hi,
After installing Netware 6 sp3 (1 cd) and mysql 4.0.17, I try starting
as described in manual, but the following happens:
when loading: MY_SQL_INSTALLDB [enter]
The answer:
The database creation failed!
Resources not available (perhaps permanently)
see ...data\<servername>.log
(The log is created, but is empty )
On the load screen there is
loading module mysqld.nlm [UNRESOLVED]
Since the log is empty I do not have a clue, can You please give me
one...
Thanks and merry Chrismas,
From Christian
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics
by: Jeff Davey |
last post by:
I spent the day porting & building a .a that I could link into an NLM
(statically) and run on Netware, for the purpose of using Python in an
application.
So far, everything (from the compiling...
|
by: David Scemama |
last post by:
Hi,
I've installed dotnet fw on a client machine and a little application on a
server under novell netware.
When I try to run my application from the client, I have a security
exception. The...
|
by: Migrators |
last post by:
Respected sir,
Will Oracle 8i run on Novell Netware 5.0 ? If not which version of
Oracle run Novell Netware 5.0. Kindly do clarify our doubt.
With Regards,
Jayachandar.B
|
by: Christian Krabbe |
last post by:
Hi,
After installing Netware 6 sp3 (1 cd) and mysql 4.0.17, I try starting as
described in manual, but the following happens:
when loading: MY_SQL_INSTALLDB
The answer:
The database creation...
|
by: gchavez |
last post by:
I'm running MSSQL 2K on Win 2k and just upgraded SQL Server from SP3
to SP4 (that's when my problem started). I have a procedure that bulk
inserts from a text file that is located on a Netware 4.11...
|
by: GMane Python |
last post by:
Hello all. Looking, I have not found a version of Python which runs on
Netware by Novell. I wonder, since Java there is a Java for Netware, is
this where Jython would come in as useful, to be...
|
by: Jamma |
last post by:
Hello,
I have an Access 2000 file working on XP machines and a NT network.
The files are split and 95% of the time all is well and stable. The
main issue arises when the app prints,a novell...
|
by: Tim Tyteca |
last post by:
Hello,
I'm creating a poll using javascript and FSO to alter the xml file that
keeps the vote count. If I run the script locally it works fine, but
when I try to run it from a netware folder it...
|
by: kaisersose1995 |
last post by:
Hi,
I'm trying to get Novell Netware information using vba into my access
database and have no
idea how to progress. Basically when i right click the properties on
my computer the free space of a...
|
by: taylorcarr |
last post by:
A Canon printer is a smart device known for being advanced, efficient, and reliable. It is designed for home, office, and hybrid workspace use and can also be used for a variety of purposes. However,...
|
by: Charles Arthur |
last post by:
How do i turn on java script on a villaon, callus and itel keypad mobile phone
|
by: aa123db |
last post by:
Variable and constants
Use var or let for variables and const fror constants.
Var foo ='bar';
Let foo ='bar';const baz ='bar';
Functions
function $name$ ($parameters$) {
}
...
|
by: ryjfgjl |
last post by:
In our work, we often receive Excel tables with data in the same format. If we want to analyze these data, it can be difficult to analyze them because the data is spread across multiple Excel files...
|
by: emmanuelkatto |
last post by:
Hi All, I am Emmanuel katto from Uganda. I want to ask what challenges you've faced while migrating a website to cloud.
Please let me know.
Thanks!
Emmanuel
|
by: BarryA |
last post by:
What are the essential steps and strategies outlined in the Data Structures and Algorithms (DSA) roadmap for aspiring data scientists? How can individuals effectively utilize this roadmap to progress...
|
by: nemocccc |
last post by:
hello, everyone, I want to develop a software for my android phone for daily needs, any suggestions?
|
by: Hystou |
last post by:
There are some requirements for setting up RAID:
1. The motherboard and BIOS support RAID configuration.
2. The motherboard has 2 or more available SATA protocol SSD/HDD slots (including MSATA, M.2...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven...
| |
