472,988 Members | 2,462 Online
Bytes | Software Development & Data Engineering Community
Post Job

Home Posts Topics Members FAQ

Join Bytes and contribute your articles to a community of 472,988 developers and data experts.

How To Improve Battery Charging of Any iPhone Model

Our technology packed iPhones act as our trusted sidekicks when we step out to face the world by giving us access to the world with a single tap. But when our iPhone confidant runs out of battery midday; you know you are in trouble. iPhones inherently drain batteries fast owing to their vast set of applications and background processes.

This article was contributed by Prizm Institute. Its course teaches repair skills as well as tips to repair and maintain all types of mobile phones and smartphones.

So, how do you ensure that your trusted sidekick sticks with you throughout the day? We've compiled the top hacks that will drastically improve the battery life of your iPhone.

[H1]Tips To Improve Battery Charging of iPhone[/H1]

1. Identify Your Top Battery Drainers
It is recommended that you identify the applications that drain the most power and treat them accordingly. For instance, Facebook usually takes up 33% of your iPhone's battery, hence, we can optimize battery consumption by switching off its notifications or background refresh.

2. Enable Your iPhone's Low Power Mode:
Your cheat number two is to enable your iPhone's low power mode which will automatically switch off background app refresh, email updates, certain visual effects, automatic downloads, etc. iPhones enable the low power mode automatically once their batteries drop below 20%, however, it can be enabled manually if you wish to ensure that your iPhone sticks with you throughout the day without recharging.

3: Clean Junks Files:
Junk or residual files include snapshots, audio / visual media information, images, etc. and are intended to temporarily speed up file access, however, they pile up over time and can consume over 1 GB. This then lowers your iPhone's speed as well as battery life and can be rectified by using third-party cache and junk cleaning applications. You also probably do not know these many other iphone repair tips and tricks.

4. Optimize Screen Brightness:
Screen brightness is one of iPhone's most battery consuming features. Hence, tremendous battery life can be saved by adjusting the screen brightness.

5. Turn Off Wi-Fi When It's Not Required:
We tend to keep our Wi-Fi enabled even when we aren't using it. This puts tremendous stress on the battery as our iPhones constantly keep searching for available networks, downloading updates, fetching emails, etc. Hence, you can save precious battery bars by switching Wi-Fi off when it isn't required.

6. Disable Location Service:
Location service enables turn by turn GPS navigation and provides information like restaurants located nearby, etc. Since it's constantly working; it constantly drains battery. Hence, when conserving battery is crucial; we can do so by turning off iPhone's location service.

7. Close Background Applications:
iPhones house several applications that constantly function in the background. These background processes deprive our iPhones of useful energy. Therefore, in order to allow our iPhones to endure longer in one charge; we can close any applications that we do not currently need.

8. Auto Lock Your iPhone:
Many a times our iPhones remain active for sometime before we remember to lock them; thus leading to energy wastage. To remedy this; we can enable auto lock that will automatically lock our iPhones after a predefined time.

By following these above tips, you are bound to conserve the battery of your iPhone or iPad. You can also visit Prizm Institute's blog for more tips and tricks of mobile phones.
Attached Images
File Type: jpg iphone-battery-charging-repair.jpg (47.0 KB, 147 views)
May 10 '18 #1
1 3316
Thanks, that was very helpful.
Oct 14 '19 #2

Sign in to post your reply or Sign up for a free account.

Similar topics

by: Miri | last post by:
Hi I have 3200 series laptop battery light is on but battery wont charge...anyone with any suggestion, it has no charge at all thanks
by: kid joe | last post by:
Hi all, Sorry this is a bit off-topic... but I do write a good amount of C code on my laptop so there is a link... Basically, it's a question about laptop batteries. About ten days ago, I...
by: Python Nutter | last post by:
Mini install guide for python on the iPhone: Cydia =Install SSH helps make initial configuration easier until you get used to MobileTerminal Cydia =Install MobileTerminal (closest to a bash...
by: isladogs | last post by:
The next Access Europe meeting will be on Wednesday 4 Oct 2023 starting at 18:00 UK time (6PM UTC+1) and finishing at about 19:15 (7.15PM) The start time is equivalent to 19:00 (7PM) in Central...
by: Aliciasmith | last post by:
In an age dominated by smartphones, having a mobile app for your business is no longer an option; it's a necessity. Whether you're a startup or an established enterprise, finding the right mobile app...
by: tracyyun | last post by:
Hello everyone, I have a question and would like some advice on network connectivity. I have one computer connected to my router via WiFi, but I have two other computers that I want to be able to...
by: NeoPa | last post by:
Introduction For this article I'll be using a very simple database which has Form (clsForm) & Report (clsReport) classes that simply handle making the calling Form invisible until the Form, or all...
by: Teri B | last post by:
Hi, I have created a sub-form Roles. In my course form the user selects the roles assigned to the course. 0ne-to-many. One course many roles. Then I created a report based on the Course form and...
by: isladogs | last post by:
The next Access Europe meeting will be on Wednesday 1 Nov 2023 starting at 18:00 UK time (6PM UTC) and finishing at about 19:15 (7.15PM) Please note that the UK and Europe revert to winter time on...
by: NeoPa | last post by:
Introduction For this article I'll be focusing on the Report (clsReport) class. This simply handles making the calling Form invisible until all of the Reports opened by it have been closed, when it...
by: GKJR | last post by:
Does anyone have a recommendation to build a standalone application to replace an Access database? I have my bookkeeping software I developed in Access that I would like to make available to other...
by: SueHopson | last post by:
Hi All, I'm trying to create a single code (run off a button that calls the Private Sub) for our parts list report that will allow the user to filter by either/both PartVendor and PartType. On...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.