473,741 Members | 5,161 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Need some help with validating

Hello,
After trying to validate this page for a couple of days now I was
wondering if someone might be able to help me out. Below is a list of
snippets where I am having the errors.
1. Line 334, column 13: there is no attribute "SRC"
<bgsound src="C:\My Documents\zingw ent.mids">
You have used the attribute named above in your document, but the document
type you are using does not support that attribute for this element. This
error is often caused by incorrect use of the "Strict" document type with a
document that uses frames (e.g. you must use the "Transition al" document
type to get the "target" attribute), or by using vendor proprietary
extensions such as "marginheig ht" (this is usually fixed by using CSS to
achieve the desired effect instead).
This error may also result if the element itself is not supported in the
document type you are using, as an undefined element will have no supported
attributes; in this case, see the element-undefined error message for
further information.
How to fix: check the spelling and case of the element and attribute,
(Remember XHTML is all lower-case) and/or check that they are both allowed
in the chosen document type, and/or use CSS instead of this attribute.
?
2. Line 334, column 44: element "BGSOUND" undefined
<bgsound src="C:\My Documents\zingw ent.mids">
You have used the element named above in your document, but the document
type you are using does not define an element of that name. This error is
often caused by incorrect use of the "Strict" document type with a document
that uses frames (e.g. you must use the "Frameset" document type to get the
"<frameset> " element), or by using vendor proprietary extensions such as
"<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the
desired effect instead).
?
3. Line 444, column 13: there is no attribute "NAME"
<ilayer name="waves34i" ><div id="waves34"><i mg src="wavesanim. gif"
alt="animated
You have used the attribute named above in your document, but the document
type you are using does not support that attribute for this element. This
error is often caused by incorrect use of the "Strict" document type with a
document that uses frames (e.g. you must use the "Transition al" document
type to get the "target" attribute), or by using vendor proprietary
extensions such as "marginheig ht" (this is usually fixed by using CSS to
achieve the desired effect instead).
This error may also result if the element itself is not supported in the
document type you are using, as an undefined element will have no supported
attributes; in this case, see the element-undefined error message for
further information.
How to fix: check the spelling and case of the element and attribute,
(Remember XHTML is all lower-case) and/or check that they are both allowed
in the chosen document type, and/or use CSS instead of this attribute.
?
4. Line 444, column 23: element "ILAYER" undefined
<ilayer name="waves34i" ><div id="waves34"><i mg src="wavesanim. gif"
alt="animated
You have used the element named above in your document, but the document
type you are using does not define an element of that name. This error is
often caused by incorrect use of the "Strict" document type with a document
that uses frames (e.g. you must use the "Frameset" document type to get the
"<frameset> " element), or by using vendor proprietary extensions such as
"<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the
desired effect instead).
?
5. Line 448, column 7: required attribute "TYPE" not specified
<script>printda te();</script>
The attribute given above is required for an element that you've used, but
you have omitted it. For instance, in most HTML and XHTML document types the
"type" attribute is required on the "script" element and the "alt" attribute
is required for the "img" element.
Typical values for type are type="text/css" for <style> and
type="text/javascript" for <script>.
?
6. Line 452, column 29: document type does not allow element "P" here;
missing one of "APPLET", "OBJECT", "MAP", "IFRAME", "BUTTON" start-tag
World Wide Web.<P> I am the webmaster of this site and
The mentioned element is not allowed to appear in the context in which
you've placed it; the other mentioned elements are the only ones that are
both allowed there and can contain the element mentioned. This might mean
that you need a containing element, or possibly that you've forgotten to
close a previous element.
One possible cause for this message is that you have attempted to put a
block-level element (such as "<p>" or "<table>") inside an inline element
(such as "<a>", "<span>", or "<font>").
?
7. Line 459, column 14: document type does not allow element "P" here;
missing one of "APPLET", "OBJECT", "MAP", "IFRAME", "BUTTON" start-tag
<P>After you have browsed through my site please sign my guestbook
The mentioned element is not allowed to appear in the context in which
you've placed it; the other mentioned elements are the only ones that are
both allowed there and can contain the element mentioned. This might mean
that you need a containing element, or possibly that you've forgotten to
close a previous element.
One possible cause for this message is that you have attempted to put a
block-level element (such as "<p>" or "<table>") inside an inline element
(such as "<a>", "<span>", or "<font>").
?
Source Listing
Below is the source input I used for this validation:
1: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
2: <html>
3: <head>
4: <title>test </title>
334: <bgsound src="C:\My Documents\test. mids">
444: <ilayer name="waves34i" ><div id="waves34"><i mg src="wavesanim. gif"
alt="animatedwa ves"></div></ilayer>
448: <script>printda te();</script>
451: <span class="contpara ">test the
452: World Wide Web.<P> test
456: <A href="http://www.test">test
457: test</A> and getting a lot of acknowledgement s from others
458: here is what I have to show which I hope you like.</P>
459: <P>After you have browsed through my site please sign my
guestbook
460: </span>
472: </body>
473: </html>

thanks you for your time
Jul 20 '05 #1
6 6327
mike wrote:
1. Line 334, column 13: there is no attribute "SRC"
<bgsound src="C:\My Documents\zingw ent.mids">
This error may also result if the element itself is not supported in the
document type you are using,
2. Line 334, column 44: element "BGSOUND" undefined
<bgsound src="C:\My Documents\zingw ent.mids">
There is no <bgsound> in HTML. Try http://w3.org/TR/html4/ to check this
sort of thing in future.

For generic media, use <object>. For background sound - remember that there
is no such thing on the web - only intrusive forground noise.
3. Line 444, column 13: there is no attribute "NAME"
<ilayer name="waves34i" ><div id="waves34">
4. Line 444, column 23: element "ILAYER" undefined
<ilayer name="waves34i" >
ilayer is a Netscape 4 ism. Almost nobody uses Netscape 4 and no other
browser supports it. It, like bgsound, is not part of any version of HTML.
5. Line 448, column 7: required attribute "TYPE" not specified
<script>printda te();</script>
The attribute given above is required for an element that you've used, but
you have omitted it. For instance, in most HTML and XHTML document types
the "type" attribute is required on the "script" element and the "alt"
attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and
type="text/javascript" for <script>.
?
It gives you an example in the error message!
6. Line 452, column 29: document type does not allow element "P" here;


You can't put a block, like a paragraph, inside an inline element, like a
span. You probably want div instead of spam.
--
David Dorward <http://blog.dorward.me .uk/> <http://dorward.me.uk/>
Home is where the ~/.bashrc is
Jul 20 '05 #2
On Sun, 08 Aug 2004 17:58:28 GMT, mike <nogood@.invali d> wrote:
After trying to validate this page for a couple of days now I was
wondering if someone might be able to help me out. Below is a list of
snippets where I am having the errors.
...
1. Line 334, column 13: there is no attribute "SRC"
<bgsound src="C:\My Documents\zingw ent.mids">
...
2. Line 334, column 44: element "BGSOUND" undefined
<bgsound src="C:\My Documents\zingw ent.mids">
There is no element bgsound in HTML. It's a proprietary element, not part
of the specs. See http://www.htmlhelp.com/design/dtd/customdtd.html for a
method of creating your own custom DTD which will allow this to validate.
3. Line 444, column 13: there is no attribute "NAME"
<ilayer name="waves34i" ><div id="waves34"><i mg src="wavesanim. gif"
alt="animated
...
4. Line 444, column 23: element "ILAYER" undefined
<ilayer name="waves34i" ><div id="waves34"><i mg src="wavesanim. gif"
alt="animated
Same here. A Netscape invention.
5. Line 448, column 7: required attribute "TYPE" not specified
<script>printda te();</script>
See http://www.w3.org/TR/html401/interac...ml#edef-SCRIPT - the
type attribute must be stated. <script type="text/javascript"> perhaps.

BTW, the previous link is to the actual specs of HTML 4. You'd do well to
familiarize yourself with this series of documents.
6. Line 452, column 29: document type does not allow element "P" here;
missing one of "APPLET", "OBJECT", "MAP", "IFRAME", "BUTTON" start-tag
World Wide Web.<P> I am the webmaster of this site and
...
7. Line 459, column 14: document type does not allow element "P" here;
missing one of "APPLET", "OBJECT", "MAP", "IFRAME", "BUTTON" start-tag
<P>After you have browsed through my site please sign my guestbook
Per your code:
451: <span class="contpara ">test the
452: World Wide Web.<P> test
456: <A href="http://www.test">test
457: test</A> and getting a lot of acknowledgement s from
others
458: here is what I have to show which I hope you like.</P>
459: <P>After you have browsed through my site please sign my
guestbook
460: </span>


span is inline, it cannot contain p. You likely meant to use div instead;
it can legally contain p.
Jul 20 '05 #3
"mike" <nogood@.invali d> wrote in
news:8R******** **********@news read2.news.pas. earthlink.net:
Hello,
After trying to validate this page for a couple of days now I was
wondering if someone might be able to help me out. Below is a list of
snippets where I am having the errors.
1. Line 334, column 13: there is no attribute "SRC"
<bgsound src="C:\My Documents\zingw ent.mids">
The BGSOUND element doesn't exist in HTML. It is something that was
invented by very special browsers, like IE. You shouldn't have
background sound running automatically anyway -- if visitors wanted to
hear music, they'd click a link that you supply. You should just delete
the element all-together.

In this instance, the validator sees the src attribute and asks, "does
the BGSOUND element have a SRC attribute?", and then discovers that it
can't find the BGSOUND element.
2. Line 334, column 44: element "BGSOUND" undefined
<bgsound src="C:\My Documents\zingw ent.mids">
Ditto.
3. Line 444, column 13: there is no attribute "NAME"
<ilayer name="waves34i" ><div id="waves34"><i mg src="wavesanim. gif"
alt="animated
Again, there is no such element as an "ilayer," you are using imaginary
HTML invented by very special browsers. It doesn't work everywhere, so
it's a terrible idea to use it.
4. Line 444, column 23: element "ILAYER" undefined
<ilayer name="waves34i" ><div id="waves34"><i mg src="wavesanim. gif"
alt="animated
Ditto.
5. Line 448, column 7: required attribute "TYPE" not specified
<script>printda te();</script>
What language is the script in? I don't know. Well, I'm just kidding --
I do know, but browsers might not know unless you tell them. You should
include the attribute type="text/javascript" in your starting tag. But
do your visitors really need you to tell them what the date is?
6. Line 452, column 29: document type does not allow element "P" here;
missing one of "APPLET", "OBJECT", "MAP", "IFRAME", "BUTTON" start-tag
World Wide Web.<P> I am the webmaster of this site and
You have a P element inside a SPAN element. However, P is block-level
and SPAN is inline, and you cannot nest block-level elements inside
inline elements.
7. Line 459, column 14: document type does not allow element "P" here;
missing one of "APPLET", "OBJECT", "MAP", "IFRAME", "BUTTON" start-tag
<P>After you have browsed through my site please sign my guestbook


Ditto.
One important thing about HTML is nesting - text-level elements (i.e.
SPAN, EM, STRONG, B, I, CODE) should be nested inside the block-level
elements (i.e. P, PRE, H1, H2).

By the way (don't take this as an insult), your page seems to be the
cliché of how to make a terrible homepage. I say this because you have
bgsound, proprietary layers, begging that people sign your guestbook,
superfluous animated GIFs (but you used ALT attributes which is good!),
and I'd imagine that you have a poor-contrast background image as well.

You might want to read this friendly document:
<http://www.cs.tut.fi/~jkorpela/coolhome.html>
--
In a room with thirty-seven people, never have everybody shake each
other's hand.
Jul 20 '05 #4
David Dorward <do*****@yahoo. com> wrote:
You probably want div instead of spam.


spam{display:no ne}

CSS3 perhaps?

--
Spartanicus
Jul 20 '05 #5
Neal wrote:
There is no element bgsound in HTML. It's a proprietary element, not
part of the specs. See http://www.htmlhelp.com/design/dtd/customdtd.html
for a method of creating your own custom DTD which will allow this to
validate.


I don't recommend that you even consider doing that. The problem with
proprietary elements is not only that they do not validate, but that
they have not been standardised and cannot be interoperably implemented
(without backwards engineering an existing implementation) in all UAs.
Generally, there's no point in using proprietary elements and
attributes; most, if not all, are presentational and the same effect can
usually be accomplished with CSS.

In the case of <bgsound>, there is no standardised method of doing
this yet (though there *may* be in CSS3 [1]), but it *must* be the
user's decision to play the sound, not the authors. It is possible to
embed an object, such as a Flash movie that has sound. But if you do
this, then add a play button so the user can start it manually. DO NOT
start it automatically when the page loads.

[1] http://www.w3.org/Style/CSS/current-work#audio
--
Lachlan Hunt
http://www.lachy.id.au/

Please direct all spam to ab***@127.0.0.1
Thank you.
Jul 20 '05 #6
Subject: Need some help with validating
From: "mike" nogood@.invalid
Date: 8/8/2004 12:58 PM Central Standard Time
Message-id: <8R************ ******@newsread 2.news.pas.eart hlink.net>

Hello,
After trying to validate this page for a couple of days now I was
wondering if someone might be able to help me out. Below is a list of
snippets where I am having the errors.
1. Line 334, column 13: there is no attribute "SRC"
<bgsound src="C:\My Documents\zingw ent.mids">
You have used the attribute named above in your document, but the document
type you are using does not support that attribute for this element. This
error is often caused by incorrect use of the "Strict" document type with a
document that uses frames (e.g. you must use the "Transition al" document
type to get the "target" attribute), or by using vendor proprietary
extensions such as "marginheig ht" (this is usually fixed by using CSS to
achieve the desired effect instead).
This error may also result if the element itself is not supported in the
document type you are using, as an undefined element will have no supported
attributes; in this case, see the element-undefined error message for
further information.
How to fix: check the spelling and case of the element and attribute,
(Remember XHTML is all lower-case) and/or check that they are both allowed
in the chosen document type, and/or use CSS instead of this attribute.
?
2. Line 334, column 44: element "BGSOUND" undefined
<bgsound src="C:\My Documents\zingw ent.mids">
You have used the element named above in your document, but the document
type you are using does not define an element of that name. This error is
often caused by incorrect use of the "Strict" document type with a document
that uses frames (e.g. you must use the "Frameset" document type to get the
"<frameset> " element), or by using vendor proprietary extensions such as
"<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the
desired effect instead).
?
3. Line 444, column 13: there is no attribute "NAME"
<ilayer name="waves34i" ><div id="waves34">[]<div id="waves34">[]" element),
or by using vendor proprietary extensions such as
"<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the
desired effect instead).
?
5. Line 448, column 7: required attribute "TYPE" not specified
<script>printd ate();</script>
The attribute given above is required for an element that you've used, but
you have omitted it. For instance, in most HTML and XHTML document types the
"type" attribute is required on the "script" element and the "alt" attribute
is required for the "img" element.
Typical values for type are type="text/css" for <style> and
type="text/javascript" for <script>.
?
6. Line 452, column 29: document type does not allow element "P" here;
missing one of "APPLET", "OBJECT", "MAP", "IFRAME", "BUTTON" start-tag
World Wide Web.
I am the webmaster of this site and
The mentioned element is not allowed to appear in the context in which
you've placed it; the other mentioned elements are the only ones that are
both allowed there and can contain the element mentioned. This might mean
that you need a containing element, or possibly that you've forgotten to
close a previous element.
One possible cause for this message is that you have attempted to put a
block-level element (such as "
" or "<table>") inside an inline element
(such as "", "<span>", or "").
?
7. Line 459, column 14: document type does not allow element "P" here;
missing one of "APPLET", "OBJECT", "MAP", "IFRAME", "BUTTON" start-tag

After you have browsed through my site please sign my guestbook
The mentioned element is not allowed to appear in the context in which
you've placed it; the other mentioned elements are the only ones that are
both allowed there and can contain the element mentioned. This might mean
that you need a containing element, or possibly that you've forgotten to
close a previous element.
One possible cause for this message is that you have attempted to put a
block-level element (such as "
" or "<table>") inside an inline element
(such as "", "<span>", or "").
?
Source Listing
Below is the source input I used for this validation:
1: 2: 3: <head> 4: <title>test </title>334: <bgsound src="C:\My
Documents\test .mids">444: <ilayer name="waves34i" ><div
id="waves34" >[]</div></ilayer>448: <script>printda te();</script>451:
<span class="contpara ">test the452: World Wide Web.
test456: test457: test and getting a lot of
acknowledgemen ts from others458: here is what I have to show
which I hope you like.459:
After you have browsed through my site please sign myguestbook460:
</span>472: 473:

thanks you for your time


Subject: Need some help with validating
From: "mike" nogood@.invalid
Date: 8/8/2004 12:58 PM Central Standard Time
Message-id: <8R************ ******@newsread 2.news.pas.eart hlink.net>

Hello,
After trying to validate this page for a couple of days now I was
wondering if someone might be able to help me out. Below is a list of
snippets where I am having the errors.
1. Line 334, column 13: there is no attribute "SRC"
<bgsound src="C:\My Documents\zingw ent.mids">
You have used the attribute named above in your document, but the document
type you are using does not support that attribute for this element. This
error is often caused by incorrect use of the "Strict" document type with a
document that uses frames (e.g. you must use the "Transition al" document
type to get the "target" attribute), or by using vendor proprietary
extensions such as "marginheig ht" (this is usually fixed by using CSS to
achieve the desired effect instead).
This error may also result if the element itself is not supported in the
document type you are using, as an undefined element will have no supported
attributes; in this case, see the element-undefined error message for
further information.
How to fix: check the spelling and case of the element and attribute,
(Remember XHTML is all lower-case) and/or check that they are both allowed
in the chosen document type, and/or use CSS instead of this attribute.
?
2. Line 334, column 44: element "BGSOUND" undefined
<bgsound src="C:\My Documents\zingw ent.mids">
You have used the element named above in your document, but the document
type you are using does not define an element of that name. This error is
often caused by incorrect use of the "Strict" document type with a document
that uses frames (e.g. you must use the "Frameset" document type to get the
"<frameset> " element), or by using vendor proprietary extensions such as
"<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the
desired effect instead).
?
3. Line 444, column 13: there is no attribute "NAME"
<ilayer name="waves34i" ><div id="waves34">[]<div id="waves34">[]" element),
or by using vendor proprietary extensions such as
"<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the
desired effect instead).
?
5. Line 448, column 7: required attribute "TYPE" not specified
<script>printd ate();</script>
The attribute given above is required for an element that you've used, but
you have omitted it. For instance, in most HTML and XHTML document types the
"type" attribute is required on the "script" element and the "alt" attribute
is required for the "img" element.
Typical values for type are type="text/css" for <style> and
type="text/javascript" for <script>.
?
6. Line 452, column 29: document type does not allow element "P" here;
missing one of "APPLET", "OBJECT", "MAP", "IFRAME", "BUTTON" start-tag
World Wide Web.
I am the webmaster of this site and
The mentioned element is not allowed to appear in the context in which
you've placed it; the other mentioned elements are the only ones that are
both allowed there and can contain the element mentioned. This might mean
that you need a containing element, or possibly that you've forgotten to
close a previous element.
One possible cause for this message is that you have attempted to put a
block-level element (such as "
" or "<table>") inside an inline element
(such as "", "<span>", or "").
?
7. Line 459, column 14: document type does not allow element "P" here;
missing one of "APPLET", "OBJECT", "MAP", "IFRAME", "BUTTON" start-tag

After you have browsed through my site please sign my guestbook
The mentioned element is not allowed to appear in the context in which
you've placed it; the other mentioned elements are the only ones that are
both allowed there and can contain the element mentioned. This might mean
that you need a containing element, or possibly that you've forgotten to
close a previous element.
One possible cause for this message is that you have attempted to put a
block-level element (such as "
" or "<table>") inside an inline element
(such as "", "<span>", or "").
?
Source Listing
Below is the source input I used for this validation:
1: 2: 3: <head> 4: <title>test </title>334: <bgsound src="C:\My
Documents\test .mids">444: <ilayer name="waves34i" ><div
id="waves34" >[]</div></ilayer>448: <script>printda te();</script>451:
<span class="contpara ">test the452: World Wide Web.
test456: test457: test and getting a lot of
acknowledgemen ts from others458: here is what I have to show
which I hope you like.459:
After you have browsed through my site please sign myguestbook460:
</span>472: 473:

thanks you for your time



Jul 23 '05 #7

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

6
5800
by: Alex Bink | last post by:
Hi, I have a validating event on a textbox in which I want to prevent the user to leave the textbox without entering the right data. Only if he clicks on another specific control he is allowed to leave the textbox without entering the right information. Is there a way to determine which other control was clicked in the validating event of the textbox? Thanks
0
1551
by: Joe | last post by:
Hi For a while now I have been finding postings of problems with the validating event not firing on controls properly. I too had this problem. The event would fire when clicking on another control which had it's causes validation property set to true however if I tabbed on to this control the event wouldn't fire. So after playing around with my code I figured out how to get it to work. I am not sure what the reason behind it is but it...
4
1301
by: KB | last post by:
I realised that if I use datagrid and datasource is a datatable, when I created a new row and while on that row I exit the datagrid (ie. without moving into the next row) and focus onto another control, that new row is not recorded (check it at the datagrid.validating event). However, if I use down arrow key to move to the next row (without keying any data) and exit, the new row is recorded in the datatable. can anyone please advise if I...
2
1291
by: dzemo | last post by:
Hi I created windows user contorl and added reference to other project. Control contains TextBox and PictureBox. How to handle some event of textbox (validating for example) of user control in form? Thank's
0
2469
by: Matthew | last post by:
All, I have searched google and the newsgroups but can't find anything the same as what I am experiencing (though I may have missed something). I have controls (textboxes) within UserControls which are not behaving as I would expect. Specifically, if there is a command button external to the usercontrol which is activated by a shortcut key (eg Alt-B), the command button Click event handler code 'executes' even though the textbox set...
0
2438
by: Gary Shell | last post by:
I am experiencing some strange behavior between a UserControl's validating event and a treeview control. Initially, I thought it was related to an issue in the Knowledgebase article 810852 (http://support.microsoft.com/kb/810852), but then I realized that the hotfix mentioned was in .Net v1.1, which I am using. I took the sample from that article and recreated the situation I see in my application. (Code included below.) If you run the...
7
1591
by: dh.evolutionnext | last post by:
Hey, I am an instructor and I have an XML class coming up. I would just like to know a good, easy, and intuitive XML editor that does validating, code completion, etc. I usually use NetBeans but that is too java-centric. I want something neutral.
21
9218
by: Darin | last post by:
I have a form w/ a textbox and Cancel button on it. I have a routine to handle textbox.validating, and I have the form setup so the Cancel button is the Cancel button. WHen the user clicks on the cancel button, the textbox.validating is being called. I don't want it to be since they are exiting the screen the validation doesn't have to be done. How can I do that.
16
5509
by: Al Santino | last post by:
Hi, It appears displaying a messagebox in a validating event will cancel the subsequent event. In the program below, button 2's click event doesn't fire if you open a dialog box in button 1's validating event. Am I doing something wrong here? Thanks Al Imports system
0
8969
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
0
8794
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
0
9484
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...
0
9342
jinu1996
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth. The Art of Business Website Design Your website is...
1
6756
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
0
4826
by: adsilva | last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
1
3286
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
2
2748
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.
3
2195
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.