hi,
when i tried to create buffer pool in production
The buffer pool operation (CREATE/ALTER) will not take effect until
the next database startup due to insufficient memory. SQLSTATE=01657
and when I re-start database i am getting
SQL1478W The defined buffer pools could not be started. Instead, one
small
buffer pool for each page size supported by DB2 has been started.
SQLSTATE=01626
i'm using 32-bit version of db2(production server) for windows. and
it works fine in my local server which is also of same config
i know The 32-bit version of DB2 can only access a maximum of 2GB of
memory.
but what is the fix for this??????
how could i get out of this situation now???
thnaks and regards
sridhar 8 2248
situ wrote:
hi,
when i tried to create buffer pool in production
The buffer pool operation (CREATE/ALTER) will not take effect until
the next database startup due to insufficient memory. SQLSTATE=01657
and when I re-start database i am getting
SQL1478W The defined buffer pools could not be started. Instead, one
small
buffer pool for each page size supported by DB2 has been started.
SQLSTATE=01626
i'm using 32-bit version of db2(production server) for windows. and
it works fine in my local server which is also of same config
i know The 32-bit version of DB2 can only access a maximum of 2GB of
memory.
but what is the fix for this??????
how could i get out of this situation now???
It appears you don't have enough memory for the buffer pools requested.
So if you decrease their sizes to a more reasonable limit you should be
fine.
Cheers
Serge
--
Serge Rielau
DB2 Solutions Development
IBM Toronto Lab
IOD Conference http://www.ibm.com/software/data/ond...ness/conf2006/
Serge Rielau wrote:
situ wrote:
hi,
when i tried to create buffer pool in production
The buffer pool operation (CREATE/ALTER) will not take effect until
the next database startup due to insufficient memory. SQLSTATE=01657
and when I re-start database i am getting
SQL1478W The defined buffer pools could not be started. Instead, one
small
buffer pool for each page size supported by DB2 has been started.
SQLSTATE=01626
i'm using 32-bit version of db2(production server) for windows. and
it works fine in my local server which is also of same config
i know The 32-bit version of DB2 can only access a maximum of 2GB of
memory.
but what is the fix for this??????
how could i get out of this situation now???
It appears you don't have enough memory for the buffer pools requested.
So if you decrease their sizes to a more reasonable limit you should be
fine.
Cheers
Serge
--
Serge Rielau
DB2 Solutions Development
IBM Toronto Lab
IOD Conference http://www.ibm.com/software/data/ond...ness/conf2006/
thanks serge,
apart from resizing, is there any thing that can be done from OS side
like doing some change in memory allotment and also from db2 by
configuring some parameters
thnks and regrads
sri
"situ" <SR********@REDIFFMAIL.COMwrote in message
news:11**********************@i3g2000cwc.googlegro ups.com...
i know The 32-bit version of DB2 can only access a maximum of 2GB of
memory.
but what is the fix for this??????
how could i get out of this situation now???
thnaks and regards
sridhar
In many cases (depending on the OS), you cannot even get up to 2GB with
32bit instance. Try lowering the bufferpools to 1GB.
Mark A wrote:
"situ" <SR********@REDIFFMAIL.COMwrote in message
news:11**********************@i3g2000cwc.googlegro ups.com...
i know The 32-bit version of DB2 can only access a maximum of 2GB of
memory.
but what is the fix for this??????
how could i get out of this situation now???
thnaks and regards
sridhar
In many cases (depending on the OS), you cannot even get up to 2GB with
32bit instance. Try lowering the bufferpools to 1GB.
thanks
till now i have'nt fix it yet, i.e i didn't decrease the buffer pool
size,
but i restarted the prod server and i connected the application to the
database amezing it seems to be working fine,
till now it doesn't bombed anywhere :)
but i have a suspicion that whether it is still using internal
bufferpools,
is there any way to know the data base is using a specifed bufferpools
what i have assigned
thanks
sri
"situ" <SR********@REDIFFMAIL.COMwrote in message
>
thanks
till now i have'nt fix it yet, i.e i didn't decrease the buffer pool
size,
but i restarted the prod server and i connected the application to the
database amezing it seems to be working fine,
till now it doesn't bombed anywhere :)
but i have a suspicion that whether it is still using internal
bufferpools,
is there any way to know the data base is using a specifed bufferpools
what i have assigned
thanks
sri
Look at the db2diag.log to see if the hiden bufferpools are used just after
instance startup.
situ wrote:
apart from resizing, is there any thing that can be done from OS side
like doing some change in memory allotment and also from db2 by
configuring some parameters
You could move to a 64bit system.
--
Knut Stolze
DB2 Information Integration Development
IBM Germany
Don't know if you want to leave it this way. Depends upon what
bufferpool sizes you ended up with. Your performance may suffer.
Larry E.
situ wrote:
Mark A wrote:
>>"situ" <SR********@REDIFFMAIL.COMwrote in message news:11**********************@i3g2000cwc.googleg roups.com...
>>>i know The 32-bit version of DB2 can only access a maximum of 2GB of memory.
but what is the fix for this??????
how could i get out of this situation now???
thnaks and regards sridhar
In many cases (depending on the OS), you cannot even get up to 2GB with 32bit instance. Try lowering the bufferpools to 1GB.
thanks
till now i have'nt fix it yet, i.e i didn't decrease the buffer pool
size,
but i restarted the prod server and i connected the application to the
database amezing it seems to be working fine,
till now it doesn't bombed anywhere :)
but i have a suspicion that whether it is still using internal
bufferpools,
is there any way to know the data base is using a specifed bufferpools
what i have assigned
thanks
sri
The other thing you could do is:
1) State which version of DB2 tyou're on. Answer to this is deopendent on
V7 or V8/V9. As well the OS as this has an impact on all versions of DB2.
2) A little bit of reading the DB2 Quick Beginnings, which is online, will
show you, for your OS, what are the constraints on memory size, bufferpools
and what , if anything can be done.
Then. when you have explored this, a post here will help you and us try to
find out what can be done, if anything.
I know I'm asking a lot here but we'd all like to help.
Regards, Pierre.
--
Pierre Saint-Jacques
SES Consultants Inc.
514-737-4515
"situ" <SR********@REDIFFMAIL.COMa écrit dans le message de news: 11**********************@b28g2000cwb.googlegroups. com...
>
Serge Rielau wrote:
>situ wrote:
hi,
when i tried to create buffer pool in production
The buffer pool operation (CREATE/ALTER) will not take effect until
the next database startup due to insufficient memory. SQLSTATE=01657
and when I re-start database i am getting
SQL1478W The defined buffer pools could not be started. Instead, one
small
buffer pool for each page size supported by DB2 has been started.
SQLSTATE=01626
i'm using 32-bit version of db2(production server) for windows. and
it works fine in my local server which is also of same config
i know The 32-bit version of DB2 can only access a maximum of 2GB of
memory.
but what is the fix for this??????
how could i get out of this situation now???
It appears you don't have enough memory for the buffer pools requested. So if you decrease their sizes to a more reasonable limit you should be fine.
Cheers Serge -- Serge Rielau DB2 Solutions Development IBM Toronto Lab
IOD Conference http://www.ibm.com/software/data/ond...ness/conf2006/
thanks serge,
apart from resizing, is there any thing that can be done from OS side
like doing some change in memory allotment and also from db2 by
configuring some parameters
thnks and regrads
sri This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics
by: Rob |
last post by:
I have a form - when you click the submit button, it appends a
variable to the URL (e.g. xyz.cgi?inputID=some_dynamic_variable)
It also opens a new page. Now, that some_dynamic_variable is...
|
by: Stefan Bauer |
last post by:
Hi NG,
we've got a very urgent problem... :(
We are importing data with the LOAD utility. The input DATE field data
is in the format DDMMYYYY (for days) and MMYYYY (for months).
The target...
|
by: Mike |
last post by:
Hello,
I have a few rather urgent questions that I hope someone can help with (I
need to figure this out prior to a meeting tomorrow.) First, a bit of
background: The company I work for is...
|
by: Tamir Khason |
last post by:
Follwing the struct:
public struct TpSomeMsgRep
{
public uint SomeId;
|
by: |
last post by:
Hi all, I have a website running on beta 2.0 on server 2003 web sp1 and I
keep getting the following error:-
Error In:...
|
by: zeyais |
last post by:
Here is my HTML:
<style>
..leftcolumn{float:left;width:300px;border: 1px solid #ccc}
..rtcolumn{float:left;width:600px;border: 1px solid #ccc}
</style>
<body>
<div class="leftcolumn"...
|
by: dembla |
last post by:
Hey Frnds can anyone help me in this
i need a program in 'c'
PROGRAM to print NxN Matrix
9 1 8 1 2 3
2 7 3 as 4 5 6
6 4 5 7 8 9
in sorted form
|
by: ginnisharma1 |
last post by:
Hi All,
I am very new to C language and I got really big assignment in my
work.I am wondering if anyone can help me.........I need to port
compiler from unix to windows and compiler is written...
|
by: N. Spiker |
last post by:
I am attempting to receive a single TCP packet with some text ending with
carriage return and line feed characters. When the text is send and the
packet has the urgent flag set, the text read from...
|
by: Cirene |
last post by:
I used to use the Web Deployment Project with my VS2005 projects.
Now I've fully upgraded to VS2008. Do I have to download a new version of
the Web Deployment Project? If so where can I find...
|
by: CloudSolutions |
last post by:
Introduction:
For many beginners and individual users, requiring a credit card and email registration may pose a barrier when starting to use cloud servers. However, some cloud server providers now...
|
by: Faith0G |
last post by:
I am starting a new it consulting business and it's been a while since I setup a new website. Is wordpress still the best web based software for hosting a 5 page website? The webpages will be...
|
by: ryjfgjl |
last post by:
In our work, we often need to import Excel data into databases (such as MySQL, SQL Server, Oracle) for data analysis and processing. Usually, we use database tools like Navicat or the Excel import...
|
by: taylorcarr |
last post by:
A Canon printer is a smart device known for being advanced, efficient, and reliable. It is designed for home, office, and hybrid workspace use and can also be used for a variety of purposes. However,...
|
by: Charles Arthur |
last post by:
How do i turn on java script on a villaon, callus and itel keypad mobile phone
|
by: aa123db |
last post by:
Variable and constants
Use var or let for variables and const fror constants.
Var foo ='bar';
Let foo ='bar';const baz ='bar';
Functions
function $name$ ($parameters$) {
}
...
|
by: BarryA |
last post by:
What are the essential steps and strategies outlined in the Data Structures and Algorithms (DSA) roadmap for aspiring data scientists? How can individuals effectively utilize this roadmap to progress...
|
by: nemocccc |
last post by:
hello, everyone, I want to develop a software for my android phone for daily needs, any suggestions?
|
by: Sonnysonu |
last post by:
This is the data of csv file
1 2 3
1 2 3
1 2 3
1 2 3
2 3
2 3
3
the lengths should be different i have to store the data by column-wise with in the specific length.
suppose the i have to...
| |