hi,
we have a problem with the db2uext2.exe under W2000 SP4 and DB2 V8 FP
4a.
We copy the sample db2uext.cdisk to db2uext.c, compiled it with
Microsoft Visual C++ Toolkit 2003 without errors.
After that we test the db2uext2.exe file like this:
D:\install\db2uext2> db2uext2.exe -RQARCHIVE -DBESN04P2 -NNNODE0000
-LPE:\DESN04P2\NODE0000\SQL00001\SQLOGDIR\ -LNS0000001.LOG
-> the result was copy 1 files. Okay.
So we think it is correct and copied the db2uext2.exe to sqllib\bin
directory
and set logretain on and userexit on in the database.
After that, we try to archive a log with following command:
db2 archive log for db ESN04P1
the command ends successfully but there are no files in the archive
directory and nothing in the ARCHIVE.LOG or USEREXIT.ERR.
Can anybody help us?
Regards
Geo
6  3470 
geo wrote: hi,
we have a problem with the db2uext2.exe under W2000 SP4 and DB2 V8 FP
4a.
We copy the sample db2uext.cdisk to db2uext.c, compiled it with
Microsoft Visual C++ Toolkit 2003 without errors.
After that we test the db2uext2.exe file like this:
D:\install\db2uext2> db2uext2.exe -RQARCHIVE -DBESN04P2 -NNNODE0000
-LPE:\DESN04P2\NODE0000\SQL00001\SQLOGDIR\ -LNS0000001.LOG
-> the result was copy 1 files. Okay.
So we think it is correct and copied the db2uext2.exe to sqllib\bin
directory
and set logretain on and userexit on in the database.
After that, we try to archive a log with following command:
db2 archive log for db ESN04P1
the command ends successfully but there are no files in the archive
directory and nothing in the ARCHIVE.LOG or USEREXIT.ERR.
Can anybody help us?
Did you actually have some operations that caused logs to be written? If
nothing is logged, then you can't archive anything.
--
Knut Stolze
Information Integration
IBM Germany / University of Jena
geo wrote: hi,
we have a problem with the db2uext2.exe under W2000 SP4 and DB2 V8 FP
4a.
We copy the sample db2uext.cdisk to db2uext.c, compiled it with
Microsoft Visual C++ Toolkit 2003 without errors.
After that we test the db2uext2.exe file like this:
D:\install\db2uext2> db2uext2.exe -RQARCHIVE -DBESN04P2 -NNNODE0000
-LPE:\DESN04P2\NODE0000\SQL00001\SQLOGDIR\ -LNS0000001.LOG
-> the result was copy 1 files. Okay.
So we think it is correct and copied the db2uext2.exe to sqllib\bin
directory
and set logretain on and userexit on in the database.
After that, we try to archive a log with following command:
db2 archive log for db ESN04P1
the command ends successfully but there are no files in the archive
directory and nothing in the ARCHIVE.LOG or USEREXIT.ERR.
Can anybody help us?
Did you actually have some operations that caused logs to be written? If
nothing is logged, then you can't archive anything.
--
Knut Stolze
Information Integration
IBM Germany / University of Jena
Knut Stolze <st****@de.ibm.com> wrote in message news:<c7**********@fsuj29.rz.uni-jena.de>... geo wrote:
hi,
we have a problem with the db2uext2.exe under W2000 SP4 and DB2 V8 FP
4a.
We copy the sample db2uext.cdisk to db2uext.c, compiled it with
Microsoft Visual C++ Toolkit 2003 without errors.
After that we test the db2uext2.exe file like this:
D:\install\db2uext2> db2uext2.exe -RQARCHIVE -DBESN04P2 -NNNODE0000
-LPE:\DESN04P2\NODE0000\SQL00001\SQLOGDIR\ -LNS0000001.LOG
-> the result was copy 1 files. Okay.
So we think it is correct and copied the db2uext2.exe to sqllib\bin
directory
and set logretain on and userexit on in the database.
After that, we try to archive a log with following command:
db2 archive log for db ESN04P1
the command ends successfully but there are no files in the archive
directory and nothing in the ARCHIVE.LOG or USEREXIT.ERR.
Can anybody help us?
Did you actually have some operations that caused logs to be written? If
nothing is logged, then you can't archive anything.
yes, i have import many tables and there are many logs in the logdir.
In the windows taskmanager,db2uext2.exe is running, but no logs were
copied and no userexit.err was written.
Knut Stolze <st****@de.ibm.com> wrote in message news:<c7**********@fsuj29.rz.uni-jena.de>... geo wrote:
hi,
we have a problem with the db2uext2.exe under W2000 SP4 and DB2 V8 FP
4a.
We copy the sample db2uext.cdisk to db2uext.c, compiled it with
Microsoft Visual C++ Toolkit 2003 without errors.
After that we test the db2uext2.exe file like this:
D:\install\db2uext2> db2uext2.exe -RQARCHIVE -DBESN04P2 -NNNODE0000
-LPE:\DESN04P2\NODE0000\SQL00001\SQLOGDIR\ -LNS0000001.LOG
-> the result was copy 1 files. Okay.
So we think it is correct and copied the db2uext2.exe to sqllib\bin
directory
and set logretain on and userexit on in the database.
After that, we try to archive a log with following command:
db2 archive log for db ESN04P1
the command ends successfully but there are no files in the archive
directory and nothing in the ARCHIVE.LOG or USEREXIT.ERR.
Can anybody help us?
Did you actually have some operations that caused logs to be written? If
nothing is logged, then you can't archive anything.
yes, i have import many tables and there are many logs in the logdir.
In the windows taskmanager,db2uext2.exe is running, but no logs were
copied and no userexit.err was written.
Hi,
I have the same problem, did you ever figure yours out? after you let db2
try and run it on its interval, did u search for archive.log? After mine
did not work I searched for it. I found it at the root of the drive I was
saving off to, but I had it configured two folders deep, not the root
level. When I opened it, for some reason the userexit program was trying
to save it to (in my case) J:DB2BackupOnLineArchiveLogs but I have it
defined as J:\DB2Backup\OnLineArchiveLogs\ and I even tried
J:\\DB2Backup\OnLineArchiveLogs\\
I also get some warnings during the compile, but no errors. Hope that
helps you.
Thats pretty wierd, uh?
Hi,
I have the same problem, did you ever figure yours out? after you let db2
try and run it on its interval, did u search for archive.log? After mine
did not work I searched for it. I found it at the root of the drive I was
saving off to, but I had it configured two folders deep, not the root
level. When I opened it, for some reason the userexit program was trying
to save it to (in my case) J:DB2BackupOnLineArchiveLogs but I have it
defined as J:\DB2Backup\OnLineArchiveLogs\ and I even tried
J:\\DB2Backup\OnLineArchiveLogs\\
I also get some warnings during the compile, but no errors. Hope that
helps you.
Thats pretty wierd, uh?
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics
by: geo |
last post by:
hi,
we have a problem with the db2uext2.exe under W2000 SP4 and DB2 V8 FP
4a.
We copy the sample db2uext.cdisk to db2uext.c, compiled it with
Microsoft Visual C++ Toolkit 2003 without errors....
|
by: Norm Wong |
last post by:
If anyone is interested in using db2uext2 with Cygwin gcc compiler on
Windows, I've modified the IBM provided sample with the attached file.
There are two main modifications.
The mkdir command...
|
by: richardshen |
last post by:
Hi, anybody has an example to combine db2uext2.cdisk & db2uext2.ctsm
together, so that db2 log can be keeped into hard drive & tsm?
Thanks
|
by: Peter |
last post by:
Hi,
I was trying to do the following:
update db cfg for oltprd using VENDOROPT "'-SErvername=aixstl20'"
update db cfg for oltprd using LOGARCHMETH1 TSM
update db cfg for oltprd using...
|
by: Paul T. RONG |
last post by:
Dear All,
I add two new tables to the database and then the disable shift key codes
don't work. These two new tables are actually created by two queries, and
only these two are in the front end,...
|
by: rogsonl |
last post by:
My computer was moved last week, and the company changed the network groups
we work on. As a result, one of the main benefits from Whidbey (database
connectivity) no longer works.
Situation:
1....
|
by: pike |
last post by:
Hi
Single partition DB2v8.1 FP7 on AIX 5.2.
I'm trying to determine whether we're archiving logs directly to tape
(and not to disk) using TSM. Without knowing from which sample it was...
|
by: Gladiator |
last post by:
hai everyone ...
can anyone tell me how to compile db2uext2.cdisk
file inorder to make use of it.......... Pls send me the link frm where
i can download the compiler if any..........
...
|
by: sam |
last post by:
Hi,
Hope you are doing well !!!!
One of our clients is looking to augment their team with “Database
Architect – DB2" please find below the details and respond with
|
by: Charles Arthur |
last post by:
How do i turn on java script on a villaon, callus and itel keypad mobile phone
|
by: ryjfgjl |
last post by:
In our work, we often receive Excel tables with data in the same format. If we want to analyze these data, it can be difficult to analyze them because the data is spread across multiple Excel files...
|
by: BarryA |
last post by:
What are the essential steps and strategies outlined in the Data Structures and Algorithms (DSA) roadmap for aspiring data scientists? How can individuals effectively utilize this roadmap to progress...
|
by: Sonnysonu |
last post by:
This is the data of csv file
1 2 3
1 2 3
1 2 3
1 2 3
2 3
2 3
3
the lengths should be different i have to store the data by column-wise with in the specific length.
suppose the i have to...
|
by: Hystou |
last post by:
There are some requirements for setting up RAID:
1. The motherboard and BIOS support RAID configuration.
2. The motherboard has 2 or more available SATA protocol SSD/HDD slots (including MSATA, M.2...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers,...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing,...
| |
