473,545 Members | 1,638 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Changing an index controlled partitioned table to table controlled.

Hello,

I am having a problem with an index controlled partitioned table. I
was altering a table using SQL. I was trying to add a partition to a
table to change it from index controlled to table controlled. This is
a new feature in version 8. Version 8 will automatically switch the
table from index controlled to table controlled if you alter the table
and add a new partition to the table. This does work because I tried
it before and it successfully changed the table. I was adding a
partition to the table so it would switch the table to table
controlled. The SQL abended with a 00C90101.

Now you can't display the table or even run an Unload against the Full
Image copies.

Has anyone else experienced this or ran accross this. Is there
anything I can do to back out the changes right now the table is pretty
much inaccessable.

If anyone else has experienced this or successfully backed out the
changes please let me know
Thanks,
Steve

Mar 13 '06 #1
3 2466
"steve" <sm*****@hotmai l.com> wrote in message
news:11******** **************@ j52g2000cwj.goo glegroups.com.. .
Hello,

I am having a problem with an index controlled partitioned table. I
was altering a table using SQL. I was trying to add a partition to a
table to change it from index controlled to table controlled. This is
a new feature in version 8. Version 8 will automatically switch the
table from index controlled to table controlled if you alter the table
and add a new partition to the table. This does work because I tried
it before and it successfully changed the table. I was adding a
partition to the table so it would switch the table to table
controlled. The SQL abended with a 00C90101.

Now you can't display the table or even run an Unload against the Full
Image copies.

Has anyone else experienced this or ran accross this. Is there
anything I can do to back out the changes right now the table is pretty
much inaccessable.

If anyone else has experienced this or successfully backed out the
changes please let me know
Thanks,
Steve


When you post on a DB2 forum, it helps to mention what version of DB2 you
are using (DB2 for z/OS).
Mar 13 '06 #2
Mark A wrote:
"steve" <sm*****@hotmai l.com> wrote in message
news:11******** **************@ j52g2000cwj.goo glegroups.com.. .
Hello,

I am having a problem with an index controlled partitioned table. I
was altering a table using SQL. I was trying to add a partition to a
table to change it from index controlled to table controlled. This is
a new feature in version 8. Version 8 will automatically switch the
table from index controlled to table controlled if you alter the table
and add a new partition to the table. This does work because I tried
it before and it successfully changed the table. I was adding a
partition to the table so it would switch the table to table
controlled. The SQL abended with a 00C90101.

Now you can't display the table or even run an Unload against the Full
Image copies.

Has anyone else experienced this or ran accross this. Is there
anything I can do to back out the changes right now the table is pretty
much inaccessable.

If anyone else has experienced this or successfully backed out the
changes please let me know
Thanks,
Steve


When you post on a DB2 forum, it helps to mention what version of DB2 you
are using (DB2 for z/OS).


That explains why I had no idea what the OP was talking about. ;-)

--
Knut Stolze
DB2 Information Integration Development
IBM Germany
Mar 13 '06 #3
Had to aply a fix to the DB2 system to fix the problem. Aparently if
your table, tablepaces, or index's are version 5 or older you can have
problems with the Alter table Add partition command.

Problem resolved

Mar 13 '06 #4

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

0
4291
by: stef | last post by:
Hi, I have a range partitioned (one partition = one month) table. On this table I have a local unique index and a local domain index (Oracle Text) on a CLOB column. I'm running Oracle 9.2.0.1.0 CREATE TABLE PAGES_4M ( LOADDATE NUMBER(8) NOT NULL,
1
3223
by: SM | last post by:
/* problem: Trying to get partitioned views to "prune" unneeded partitions from select statements against the partitioned view. There are 5 partitioned tables. Each with a check constraint based on a range of formula_id column. Test: Run this script to create the 5 partitioned tables and the partitioned view. Then
3
2407
by: Thomas R. Hummel | last post by:
Hello, I have a large set of data that I have set up as a partitioned view. The view is partitioned by a datetime column and the individual tables each represent one month's worth of data. I need to keep at least two year's worth of data at all times, but after two years I can archive the data. A sample of the code used is below. It is...
1
5184
by: db2udbgirl | last post by:
Env : DB2 UDB 8.2 / AIX 5.3 When I try to use some DB2 Utilities against a partitioned table which is not defined on a particular node (Node 0 in this case) I'm getting this error. /home/db2udbgirl> db2 load query table ETL.TRANSACTION SQL6024E Table or index "TRANSACTION" is not defined on node "0". Hence I would do the following...
10
2368
by: Sumanth | last post by:
Hi, I have a table that I would like to partition. It has a column c1 which has 100 distinct values. I was planning to partition the table on column c1 using a partioned index, and then apply data partitioned secondary indexes on the table. I then read about partioned table spaces, How do I get the same behaviour as above by creating a...
4
7689
by: shsandeep | last post by:
I created tables without using the 'INDEX in tablespace' statement. I want to add indexes on these tables. How can I mention as to which tablespace the indexes should use? Thanks. Cheers, San.
5
1708
by: Victor | last post by:
Hello, I have a table which has around 3 billion records on an env and a simple query against it goes for a tablescan eventhough an index has been defined and this happens only on an env. Details are as below. Please advice Query Considered : select A.OPTN_CD from VIN_VEH_OPTNS as A WHERE A.DWH_UPD_TIMSTM < (SELECT...
10
4264
by: shsandeep | last post by:
The ETL application loaded around 3000 rows in 14 seconds in a Development database while it took 2 hours to load in a UAT database. UAT db is partitioned. Dev db is not partitioned. the application looks for existing rows in the table...if they already exist then it updates otherwise inserts them. The table is pretty large, around 6.5...
2
13569
by: eeriehunk | last post by:
Hi All, Is it possible to create a partitioned index on a table which is not partitioned? If so what is such a partition called and please explain? I have done some research on partitions and index partitions and this is where I hit the wall the 2nd time. As per my study there are 3 types of indexed partitions: Global index (which is on an...
0
7393
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language...
0
7653
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. ...
0
7803
jinu1996
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that...
1
7411
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For...
0
7749
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the...
1
5322
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes...
0
3439
by: adsilva | last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
1
1012
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.
0
695
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.