473,573 Members | 2,696 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

How to build RAID in BIOS?

3 New Member
There are some requirements for setting up RAID:
1. The motherboard and BIOS support RAID configuration.
2. The motherboard has 2 or more available SATA protocol SSD/HDD slots (including MSATA, M.2 SATA, and 2.5-inch SATA hard drives).
1. Important data on the hard drive should be backed up in advance, as this step will delete all data on the original hard drive.
2. Operating systems installed in AHCI or other modes will not work in RAID mode. The operating system must be reinstalled in RAID mode to boot normally.

After setting up RAID, only UEFI mode is supported for installing the operating system.
1. After pressing the computer's power button, quickly press the Del key to enter BIOS setup.
2. In BIOS, select Chipset > PCH-IO Configuration > SATA and RTS Configuration > Set "SATA Mode Selection" to "Intel RST Premium with Intel Optane System Acceleration". > Press Esc on your keyboard to exit the current page. Finally, select "Save and Exit".

You can also read this article to learn more about RAID0, RAID1, and RAID5, which I've also covered.
Apr 11 '24 #1
0 8752

Sign in to post your reply or Sign up for a free account.

Similar topics

by: Bernie | last post by:
I will be doing some performance testing on financial application next month. Without going into a lot of details, I suspect I will have a potential bottleneck when writing to the log file. My hardware setup is a quad 2.8 Xeon Dell server direct attached to a DELL/EMC CX200 (Fibre channel array with 10 X 30something GB, 15,000 rpm drives,...
by: Mark Kirkwood | last post by:
Dear all, Here is the first installment concerning ATA disks and RAID controller use in a database server. I happened to have a Solaris system to myself this week, so took the opportunity to use it as a "control". In this post I used the ATA RAID controller merely to enable UDMA 133 for an oldish x86 machine, the effect of any actual RAID...
by: Joseph | last post by:
I've been thinking about the benefits or lack thereof of deploying DMS tablespaces for RAID, say RAID 5. The point of DMS is to get reasonable size extents of contiguous disk space so that minimal seeking is done with sequential scans of data and sequential prefetching can pipeline the reading of data with its processing etc. RAID...
by: esmith2112 | last post by:
We replaced an aging system with a newer (faster 4-way) and presumably better system. Perfomance for most queries has improved as one would expect. However, we're getting slaughtered on performance for summary-style queries. What took 2 minutes now takes 2-3 hours to complete. We backed up DB and restored it on a borrowed (somewhat inferior...
by: Dave | last post by:
RAID 5 beats RAID 10 Can I get some feedback on these results? We were having some serious IO issues according to PerfMon so I really pushed for RAID 10. The results are not what I expected. I have 2 identical servers. Hardware: PowerEdge 2850
by: alf | last post by:
Hi, is it possible that due to OS crash or mysql itself crash or some e.g. SCSI failure to lose all the data stored in the table (let's say million of 1KB rows). In other words what is the worst case scenario for MyISAM backend? Also is it possible to not to lose data but get them corrupted?
by: Scav | last post by:
Helpful folks, I am trying to find any doc or research or studies comparing the pros and cons of architecting a DB2 disk subsystem to physically segragate index access and data access on separate spindles, as opposed to putting both index and data on one RAID group and assuming the striping will provide adequate segregation. Can anyone...
by: DannielHS | last post by:
*A RAID distributes data across several physical disks which look to the operating system and the user like a single disk. Several different arrangements are possible. We assume here that all the disks are of the same capacity, as is usual. A number of standard schemes have evolved which are referred to as levels. There were three RAID levels...
by: rando1000 | last post by:
I have a server running raid 0 configuration. I'm getting ready to upgrade it to new hard drives, and will be taking the server down for the upgrade process. Since I'm putting new drives in, I'll have to re-create the array before install, which is fine. However, since both of the original drives are still functional, I wonder if it would be...
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main...
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language...
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For...
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the...
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then...
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes...
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in...
by: adsilva | last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.