hi all
When I update my dataset it gives me an error which follows
"Concurrecny failed, 0 record affected"
I don't know why??..I don't do anything that raise this error..
just when user press Save button I call Update mehtod of my SqlDataAdaptor.. 11 1332
The dataAdapter thinks there is an error because 0 rows were updated when
you did an Update, you need to isolate the reason for this by debugging.
--
Terry Burns http://TrainingOn.net
"perspolis" <re*****@hotmail.com> wrote in message
news:OI**************@TK2MSFTNGP14.phx.gbl... hi all When I update my dataset it gives me an error which follows "Concurrecny failed, 0 record affected" I don't know why??..I don't do anything that raise this error.. just when user press Save button I call Update mehtod of my SqlDataAdaptor..
I chnage my dataset and even check the row that raise this error..
but that row has modified row state ..then I think it can be updated..
but it dosen't :(
"Terry Burns" <us@ourWebSite.com> wrote in message
news:#2**************@TK2MSFTNGP10.phx.gbl... The dataAdapter thinks there is an error because 0 rows were updated when you did an Update, you need to isolate the reason for this by debugging.
-- Terry Burns http://TrainingOn.net "perspolis" <re*****@hotmail.com> wrote in message news:OI**************@TK2MSFTNGP14.phx.gbl... hi all When I update my dataset it gives me an error which follows "Concurrecny failed, 0 record affected" I don't know why??..I don't do anything that raise this error.. just when user press Save button I call Update mehtod of my SqlDataAdaptor..
Did you write the Update code yourself. Its easy to make an error, try
creating a new project and letting the wizard write the update code and then
check it against yours.
--
Terry Burns http://TrainingOn.net
"perspolis" <re*****@hotmail.com> wrote in message
news:%2****************@tk2msftngp13.phx.gbl... I chnage my dataset and even check the row that raise this error.. but that row has modified row state ..then I think it can be updated.. but it dosen't :( "Terry Burns" <us@ourWebSite.com> wrote in message news:#2**************@TK2MSFTNGP10.phx.gbl... The dataAdapter thinks there is an error because 0 rows were updated when you did an Update, you need to isolate the reason for this by debugging.
-- Terry Burns http://TrainingOn.net "perspolis" <re*****@hotmail.com> wrote in message news:OI**************@TK2MSFTNGP14.phx.gbl... > hi all > When I update my dataset it gives me an error which follows > "Concurrecny failed, 0 record affected" > I don't know why??..I don't do anything that raise this error.. > just when user press Save button I call Update mehtod of my > SqlDataAdaptor.. > > >
The reason for this is that you have a timestamp or something of that
nature on the record which was changed before you made the update.
For example, you could have a timestamp value on the row. When you
select the row, say the value is "a". Then, some other operation somewhere
saves the record, and it updates to "b". Then, you try and save your
changes. When you save it, it compares "a" with "b", and realizes that
someone else made a change, and you might not want to commit your change,
since the data you have is outdated.
Hope this helps.
--
- Nicholas Paldino [.NET/C# MVP]
- mv*@spam.guard.caspershouse.com
"perspolis" <re*****@hotmail.com> wrote in message
news:%2****************@tk2msftngp13.phx.gbl... I chnage my dataset and even check the row that raise this error.. but that row has modified row state ..then I think it can be updated.. but it dosen't :( "Terry Burns" <us@ourWebSite.com> wrote in message news:#2**************@TK2MSFTNGP10.phx.gbl... The dataAdapter thinks there is an error because 0 rows were updated when you did an Update, you need to isolate the reason for this by debugging.
-- Terry Burns http://TrainingOn.net "perspolis" <re*****@hotmail.com> wrote in message news:OI**************@TK2MSFTNGP14.phx.gbl... > hi all > When I update my dataset it gives me an error which follows > "Concurrecny failed, 0 record affected" > I don't know why??..I don't do anything that raise this error.. > just when user press Save button I call Update mehtod of my > SqlDataAdaptor.. > > >
More generically, the original posted has a WHERE clause in the UPDATE
statement that is not matching any rows. It is possible, if he crafted this
UPDATE himself, that he is doing something other than looking at a TimeStamp
or DateTime field, or a laborious comparison of all fields before and
after -- or that he has implemented them wrong.
Figure out why the UPDATE isn't affecting any rows and you have the answer.
It doesn't matter that the datarow in the datatable has changed; it only
matters whether SQL Server can find any matching record(s) to put the
changed data into.
--Bob
"Nicholas Paldino [.NET/C# MVP]" <mv*@spam.guard.caspershouse.com> wrote in
message news:uJ**************@TK2MSFTNGP15.phx.gbl... The reason for this is that you have a timestamp or something of that nature on the record which was changed before you made the update.
For example, you could have a timestamp value on the row. When you select the row, say the value is "a". Then, some other operation somewhere saves the record, and it updates to "b". Then, you try and save your changes. When you save it, it compares "a" with "b", and realizes that someone else made a change, and you might not want to commit your change, since the data you have is outdated.
Hope this helps.
-- - Nicholas Paldino [.NET/C# MVP] - mv*@spam.guard.caspershouse.com
"perspolis" <re*****@hotmail.com> wrote in message news:%2****************@tk2msftngp13.phx.gbl...I chnage my dataset and even check the row that raise this error.. but that row has modified row state ..then I think it can be updated.. but it dosen't :( "Terry Burns" <us@ourWebSite.com> wrote in message news:#2**************@TK2MSFTNGP10.phx.gbl... The dataAdapter thinks there is an error because 0 rows were updated when you did an Update, you need to isolate the reason for this by debugging.
-- Terry Burns http://TrainingOn.net "perspolis" <re*****@hotmail.com> wrote in message news:OI**************@TK2MSFTNGP14.phx.gbl... > hi all > When I update my dataset it gives me an error which follows > "Concurrecny failed, 0 record affected" > I don't know why??..I don't do anything that raise this error.. > just when user press Save button I call Update mehtod of my > SqlDataAdaptor.. > > >
thx all..I use a transaction..when an error occurs I rollback
transaction..and when I change my dataset again and correct that error the
concurrency error occures...
"Bob Grommes" <bo*@bobgrommes.com> wrote in message
news:#O**************@tk2msftngp13.phx.gbl... More generically, the original posted has a WHERE clause in the UPDATE statement that is not matching any rows. It is possible, if he crafted
this UPDATE himself, that he is doing something other than looking at a
TimeStamp or DateTime field, or a laborious comparison of all fields before and after -- or that he has implemented them wrong.
Figure out why the UPDATE isn't affecting any rows and you have the
answer. It doesn't matter that the datarow in the datatable has changed; it only matters whether SQL Server can find any matching record(s) to put the changed data into.
--Bob
"Nicholas Paldino [.NET/C# MVP]" <mv*@spam.guard.caspershouse.com> wrote
in message news:uJ**************@TK2MSFTNGP15.phx.gbl... The reason for this is that you have a timestamp or something of that nature on the record which was changed before you made the update.
For example, you could have a timestamp value on the row. When you select the row, say the value is "a". Then, some other operation somewhere saves the record, and it updates to "b". Then, you try and
save your changes. When you save it, it compares "a" with "b", and realizes that someone else made a change, and you might not want to commit your change, since the data you have is outdated.
Hope this helps.
-- - Nicholas Paldino [.NET/C# MVP] - mv*@spam.guard.caspershouse.com
"perspolis" <re*****@hotmail.com> wrote in message news:%2****************@tk2msftngp13.phx.gbl...I chnage my dataset and even check the row that raise this error.. but that row has modified row state ..then I think it can be
updated.. but it dosen't :( "Terry Burns" <us@ourWebSite.com> wrote in message news:#2**************@TK2MSFTNGP10.phx.gbl... The dataAdapter thinks there is an error because 0 rows were updated when you did an Update, you need to isolate the reason for this by
debugging. -- Terry Burns http://TrainingOn.net "perspolis" <re*****@hotmail.com> wrote in message news:OI**************@TK2MSFTNGP14.phx.gbl... > hi all > When I update my dataset it gives me an error which follows > "Concurrecny failed, 0 record affected" > I don't know why??..I don't do anything that raise this error.. > just when user press Save button I call Update mehtod of my > SqlDataAdaptor.. > > >
Doesn't change the solution -- you have to determine why the second UPDATE
isn't matching any records. Something makes the WHERE condition false the
second time. What is it?
--Bob
"perspolis" <re*****@hotmail.com> wrote in message
news:ul**************@TK2MSFTNGP09.phx.gbl... thx all..I use a transaction..when an error occurs I rollback transaction..and when I change my dataset again and correct that error the concurrency error occures...
"Bob Grommes" <bo*@bobgrommes.com> wrote in message news:#O**************@tk2msftngp13.phx.gbl... More generically, the original posted has a WHERE clause in the UPDATE statement that is not matching any rows. It is possible, if he crafted this UPDATE himself, that he is doing something other than looking at a TimeStamp or DateTime field, or a laborious comparison of all fields before and after -- or that he has implemented them wrong.
Figure out why the UPDATE isn't affecting any rows and you have the answer. It doesn't matter that the datarow in the datatable has changed; it only matters whether SQL Server can find any matching record(s) to put the changed data into.
--Bob
in my project I have 2 tables (one master and another details)
first I update master then details..when I make a mistake in details and
update both ,the details gives me an error then I correct that error and
update both again..this time I get a concurrency error...I don't do anything
special to get this error..
"Bob Grommes" <bo*@bobgrommes.com> wrote in message
news:#K**************@TK2MSFTNGP09.phx.gbl... Doesn't change the solution -- you have to determine why the second UPDATE isn't matching any records. Something makes the WHERE condition false the second time. What is it?
--Bob
"perspolis" <re*****@hotmail.com> wrote in message news:ul**************@TK2MSFTNGP09.phx.gbl... thx all..I use a transaction..when an error occurs I rollback transaction..and when I change my dataset again and correct that error
the concurrency error occures...
"Bob Grommes" <bo*@bobgrommes.com> wrote in message news:#O**************@tk2msftngp13.phx.gbl... More generically, the original posted has a WHERE clause in the UPDATE statement that is not matching any rows. It is possible, if he crafted this UPDATE himself, that he is doing something other than looking at a TimeStamp or DateTime field, or a laborious comparison of all fields before and after -- or that he has implemented them wrong.
Figure out why the UPDATE isn't affecting any rows and you have the answer. It doesn't matter that the datarow in the datatable has changed; it
only matters whether SQL Server can find any matching record(s) to put the changed data into.
--Bob
in my project I have 2 tables (one master and another details)
first I update master then details..when I make a mistake in details and
update both ,the details gives me an error then I correct that error and
update both again..this time I get a concurrency error...I don't do anything
special to get this error..
"Nicholas Paldino [.NET/C# MVP]" <mv*@spam.guard.caspershouse.com> wrote in
message news:uJ**************@TK2MSFTNGP15.phx.gbl... The reason for this is that you have a timestamp or something of that nature on the record which was changed before you made the update.
For example, you could have a timestamp value on the row. When you select the row, say the value is "a". Then, some other operation
somewhere saves the record, and it updates to "b". Then, you try and save your changes. When you save it, it compares "a" with "b", and realizes that someone else made a change, and you might not want to commit your change, since the data you have is outdated.
Hope this helps.
-- - Nicholas Paldino [.NET/C# MVP] - mv*@spam.guard.caspershouse.com
"perspolis" <re*****@hotmail.com> wrote in message news:%2****************@tk2msftngp13.phx.gbl...I chnage my dataset and even check the row that raise this error.. but that row has modified row state ..then I think it can be
updated.. but it dosen't :( "Terry Burns" <us@ourWebSite.com> wrote in message news:#2**************@TK2MSFTNGP10.phx.gbl... The dataAdapter thinks there is an error because 0 rows were updated
when you did an Update, you need to isolate the reason for this by
debugging. -- Terry Burns http://TrainingOn.net "perspolis" <re*****@hotmail.com> wrote in message news:OI**************@TK2MSFTNGP14.phx.gbl... > hi all > When I update my dataset it gives me an error which follows > "Concurrecny failed, 0 record affected" > I don't know why??..I don't do anything that raise this error.. > just when user press Save button I call Update mehtod of my > SqlDataAdaptor.. > > >
[sigh] I'm not saying that you are doing anything special. I am saying
that:
1) A concurrency error happens when @@ROWCOUNT = 0 after the UPDATE.
2) Therefore, we can deduce that for some reason @@ROWCOUNT = 0 after your
2nd update.
3) Therefore, something in the WHERE no longer matches any available
records.
4) You have to find out what that is. You have to do this whether or not it
makes any sense to you, whether or not it happens only on the 2nd update,
and whether or not you want to. ;-)
I would start by setting a breakpoint after the error and then go into Query
Analyzer and call up the record that was just updated, both before and after
the rollback. Then I would step through until you can see what parameter
values are being passed to the DB when you attempt the 2nd update. You
might also get yet a third copy of the record you're concerned with, just
before that 2nd update. You might also try to manually do a SELECT with the
same WHERE condition as the UPDATE to see if it returns anything.
Somewhere in there you will have an "AHAH! moment".
--Bob
"perspolis" <re*****@hotmail.com> wrote in message
news:%2****************@TK2MSFTNGP09.phx.gbl... in my project I have 2 tables (one master and another details) first I update master then details..when I make a mistake in details and update both ,the details gives me an error then I correct that error and update both again..this time I get a concurrency error...I don't do anything special to get this error..
"Bob Grommes" <bo*@bobgrommes.com> wrote in message news:#K**************@TK2MSFTNGP09.phx.gbl... Doesn't change the solution -- you have to determine why the second UPDATE isn't matching any records. Something makes the WHERE condition false the second time. What is it?
--Bob
"perspolis" <re*****@hotmail.com> wrote in message news:ul**************@TK2MSFTNGP09.phx.gbl... > thx all..I use a transaction..when an error occurs I rollback > transaction..and when I change my dataset again and correct that error the > concurrency error occures... > > "Bob Grommes" <bo*@bobgrommes.com> wrote in message > news:#O**************@tk2msftngp13.phx.gbl... >> More generically, the original posted has a WHERE clause in the UPDATE >> statement that is not matching any rows. It is possible, if he >> crafted > this >> UPDATE himself, that he is doing something other than looking at a > TimeStamp >> or DateTime field, or a laborious comparison of all fields before and >> after -- or that he has implemented them wrong. >> >> Figure out why the UPDATE isn't affecting any rows and you have the > answer. >> It doesn't matter that the datarow in the datatable has changed; it only >> matters whether SQL Server can find any matching record(s) to put the >> changed data into. >> >> --Bob
thx so much bob
"Bob Grommes" <bo*@bobgrommes.com> wrote in message
news:ei**************@TK2MSFTNGP12.phx.gbl... [sigh] I'm not saying that you are doing anything special. I am saying that:
1) A concurrency error happens when @@ROWCOUNT = 0 after the UPDATE. 2) Therefore, we can deduce that for some reason @@ROWCOUNT = 0 after your 2nd update. 3) Therefore, something in the WHERE no longer matches any available records. 4) You have to find out what that is. You have to do this whether or not
it makes any sense to you, whether or not it happens only on the 2nd update, and whether or not you want to. ;-)
I would start by setting a breakpoint after the error and then go into
Query Analyzer and call up the record that was just updated, both before and
after the rollback. Then I would step through until you can see what parameter values are being passed to the DB when you attempt the 2nd update. You might also get yet a third copy of the record you're concerned with, just before that 2nd update. You might also try to manually do a SELECT with
the same WHERE condition as the UPDATE to see if it returns anything.
Somewhere in there you will have an "AHAH! moment".
--Bob
"perspolis" <re*****@hotmail.com> wrote in message news:%2****************@TK2MSFTNGP09.phx.gbl... in my project I have 2 tables (one master and another details) first I update master then details..when I make a mistake in details and update both ,the details gives me an error then I correct that error
and update both again..this time I get a concurrency error...I don't do anything special to get this error..
"Bob Grommes" <bo*@bobgrommes.com> wrote in message news:#K**************@TK2MSFTNGP09.phx.gbl... Doesn't change the solution -- you have to determine why the second UPDATE isn't matching any records. Something makes the WHERE condition false the second time. What is it?
--Bob
"perspolis" <re*****@hotmail.com> wrote in message news:ul**************@TK2MSFTNGP09.phx.gbl... > thx all..I use a transaction..when an error occurs I rollback > transaction..and when I change my dataset again and correct that
error the > concurrency error occures... > > "Bob Grommes" <bo*@bobgrommes.com> wrote in message > news:#O**************@tk2msftngp13.phx.gbl... >> More generically, the original posted has a WHERE clause in the
UPDATE >> statement that is not matching any rows. It is possible, if he >> crafted > this >> UPDATE himself, that he is doing something other than looking at a > TimeStamp >> or DateTime field, or a laborious comparison of all fields before
and >> after -- or that he has implemented them wrong. >> >> Figure out why the UPDATE isn't affecting any rows and you have the > answer. >> It doesn't matter that the datarow in the datatable has changed; it only >> matters whether SQL Server can find any matching record(s) to put
the >> changed data into. >> >> --Bob
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics
by: AIM |
last post by:
Error in msvc in building inheritance.obj to build hello.pyd
Hello,
I am trying to build the boost 1.31.0 sample extension hello.cpp.
I can not compile the file inheritance.cpp because the two...
|
by: Tony Wright |
last post by:
Hi,
I am having a problem installing an msi for a web site. The error
message I am getting is:
"The specified path 'http://mipdev05/features/Fas2' is unavailable.
The Internet Information...
|
by: Aravind |
last post by:
we have two files:
1. rc4.c (defines one function "create_pin()")
2. MyImpl.c(calling the function "create_pin()"),This implements JNI
method.
1.When I am trying to create .dll file with one...
|
by: yanwan |
last post by:
I met this problem in executing a c++ project in visual studio.
Does anyone have suggestions to resolve "error lnk 2001"?
--------------------Configuration: reconstruction - Win32...
|
by: Enos Meroka |
last post by:
Hallo,
I am a student doing my project in the university.. I have been trying
to compile the program using HP -UX aCC compiler, however I keep on
getting the following errors.
...
|
by: deko |
last post by:
I use this convention frequently:
Exit_Here:
Exit Sub
HandleErr:
Select Case Err.Number
Case 3163
Resume Next
Case 3376
Resume Next
|
by: p |
last post by:
WE had a Crystal 8 WebApp using vs 2002 which we upgraded to VS2003. I also
have Crystal 9 pro on my development machine. The web app runs fine on my
dev machine but am having problems deploying....
|
by: hyperpau |
last post by:
Before anything else, I am not a very technical expert when it comes to VBA coding.
I learned most of what I know by the excellent Access/VBA forum from bytes.com (formerly thescripts.com).
Ergo, I...
|
by: hyperpau |
last post by:
Before anything else, I am not a very technical expert when it comes to VBA coding.
I learned most of what I know by the excellent Access/VBA forum from bytes.com (formerly thescripts.com).
Ergo, I...
|
by: ryjfgjl |
last post by:
ExcelToDatabase: batch import excel into database automatically...
|
by: isladogs |
last post by:
The next Access Europe meeting will be on Wednesday 6 Mar 2024 starting at 18:00 UK time (6PM UTC) and finishing at about 19:15 (7.15PM).
In this month's session, we are pleased to welcome back...
|
by: jfyes |
last post by:
As a hardware engineer, after seeing that CEIWEI recently released a new tool for Modbus RTU Over TCP/UDP filtering and monitoring, I actively went to its official website to take a look. It turned...
|
by: ArrayDB |
last post by:
The error message I've encountered is; ERROR:root:Error generating model response: exception: access violation writing 0x0000000000005140, which seems to be indicative of an access violation...
|
by: PapaRatzi |
last post by:
Hello,
I am teaching myself MS Access forms design and Visual Basic. I've created a table to capture a list of Top 30 singles and forms to capture new entries. The final step is a form (unbound)...
|
by: Defcon1945 |
last post by:
I'm trying to learn Python using Pycharm but import shutil doesn't work
|
by: Shællîpôpï 09 |
last post by:
If u are using a keypad phone, how do u turn on JavaScript, to access features like WhatsApp, Facebook, Instagram....
|
by: Faith0G |
last post by:
I am starting a new it consulting business and it's been a while since I setup a new website. Is wordpress still the best web based software for hosting a 5 page website? The webpages will be...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 3 Apr 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome former...
| |