473,544 Members | 1,843 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Socket Bind(localEndPo int) <-- Virtual IP

Hi there,

Please find file for illustrating infrastructure -->
http://test.thipparath.com/GPRS/GPRS.jpg . Gateway receives packets
from Trucks for processing Route/GPS position. When Truck and Gateway
communicate in leased line, Gateway identifies different IP sent by
different truck. Where communicate over internet, NAT Server is used
for sending packets from different Trucks. Here is come to a problem
that Gateway unable to create individual Truck Session for tracking for

each truck GPS position because every packet received from internet is
Same IP address.
Hence, I would like to simulate NAT reverse translation function
(separate source IP in Packets to different IP according to data in
Packet). I decided to develop C# sockets offered in .NET framework. My
application will play 2 roles – 1) Act Server to listen inbound
packet from internet, 2) Act Client to forward captured packet to
Gateway with different IP as the following flows:
1) Create Asynchronous Socket for Listening
2) Reading data by Accepted Socket instance, analyze data ( data
contain SIM No for key ), Lookup Table in Database or Generate virtual
IP
3) Forward data with Different virtual IP
Problem Section (Sending data to Gateway)
// I want to generate virtual IP
IPAddress ipHostAddress = IPAddress.Parse (“192.XX.XX.X XX”);
IPEndPoint localEndPoint = new IPEndPoint(ipHo stAddress,0);
Socket sender = new Socket(AddressF amily.InterNetw ork,
SocketType.Stre am,
ProtocolType.Tc p);
sender.Bind(loc alEndPoint); //  I can’t bind virtual IP
// ( Requsted address invalid in it context ) Socket Exception thrown
sender.Connect( remoteEndPoint) ;
I sincerely would like to know yours idea in the scenario like this. Is

there any other ways? Thanks in advance.

Feb 16 '06 #1
0 2141

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

11
1911
by: Thomas Zangl | last post by:
Hi! I have a class hierachie like this: // interface, abstract only class ISession { } // implements common parts of ISession
2
1932
by: Thomas Zangl | last post by:
Hi! First - thanks for your previous replies! After fixing the c'tor everything went fine until ... I added one more class in the hierachie. I have a class hierachie like this: // interface, abstract only class ISession {
1
3997
by: Jonathan Woods | last post by:
Hi there, Please find file for illustrating infrastructure --> http://test.thipparath.com/GPRS/GPRS.jpg . Gateway receives packets from Trucks for processing Route/GPS position. When Truck and Gateway communicate in leased line, Gateway identifies different IP sent by different truck. Where communicate over internet, NAT Server is used for...
0
445
by: Jonathan Woods | last post by:
Hi there, Please find file for illustrating infrastructure --> http://test.thipparath.com/GPRS/GPRS.jpg . Gateway receives packets from Trucks for processing Route/GPS position. When Truck and Gateway communicate in leased line, Gateway identifies different IP sent by different truck. Where communicate over internet, NAT Server is used for...
6
1870
by: kikapu | last post by:
Hi to all, i have the following simple Socket Server code and a vb client that send to it some data using WinHttp. (very simple code, just open and send) The string is succesfully sent to the server but not the reverse when the server just replies with a string. The client reports (last dll error) that "the server returned an invalid or...
1
1816
by: RSecor | last post by:
# sysctl -a | grep somaxconn kern.ipc.somaxconn: 1024 # perl -MSocket -e'print SOMAXCONN; print "\n";' 128 Anyone have any ideas why one would be 1024 and the other only 128?
4
16058
by: O.B. | last post by:
I have a socket configured as TCP and running as a listener. When I close socket, it doesn't always free up the port immediately. Even when no connections have been made to it. So when I open the socket again, the bind fails because the port is still in use. When I execute the code in "debug" mode, the problem never occurs. When I...
6
3363
by: Gert Kok | last post by:
When fgets() reads a string that ands with <<<EOT, the string is truncated after << and a lot of following input is discarded. When <<<EOT is changed to <<< EOT, behaviour is as I expect it. Can it be explained why the content of a file is interfering with the behaviour of fgets()?
1
3348
Airslash
by: Airslash | last post by:
Hello, The problem is that my server is not receiving data. The code below are the various classes I designed around sockets. It will be big... I have run the code with the debugger, and I see in the debug output that the client connects to the server, the events get fired and the disconnect event gets fired as well. I get confirmation...
0
7431
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, well explore What is ONU, What Is Router, ONU & Routers main...
0
7617
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. ...
0
7779
jinu1996
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that...
0
7714
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the...
0
5920
agi2029
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development projectplanning, coding, testing, and deploymentwithout human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then...
1
5305
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupr who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes...
0
3415
by: adsilva | last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
1
1848
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
0
674
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.