473,692 Members | 2,788 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Setting Input mode for serial communications.

Hi All,

I am having a problem setting up input mode for serial
communications.

(Sorry about the long code post).

The following code is what I use to set up my comm port.
// Constructor for Form with an AxMSCommLib control on it
named "com"
public SerialTerm()
{
// Initialize Form Components
InitializeCompo nent();

// Initialize the COM Port control
InitComPort();
}

private void InitComPort()
{
// Set the com port to be 1

com.CommPort = 1;

// This port is already open, close it to reset it.

if (com.PortOpen) com.PortOpen = false;

// Trigger the OnComm event whenever data is received

com.RThreshold = 1;

// Set the port to 9600 baud, no parity bit, 8 data
bits, 1 stop bit (all standard)

com.Settings = "9600,n,8,1 ";

// Force the DTR line high, used sometimes to hang up
modems

com.DTREnable = true;

// No handshaking is used

com.Handshaking = 0;

// Don't mess with byte arrays, only works with
simple data (characters A-Z and numbers)

com.InputMode =
MSCommLib.Input ModeConstants.c omInputModeBina ry;

// Use this line instead for byte array input, best
for most communications

//com.InputMode =
MSCommLib.Input ModeConstants.c omInputModeText ;

// Read the entire waiting data when com.Input is used

com.InputLen = 0;

// Don't discard nulls, 0x00 is a useful byte

com.NullDiscard = false;

// Attach the event handler

com.OnComm += new System.EventHan dler(this.OnCom m);

// Open the com port

com.PortOpen = true;
}

The following is the compile error:

'AxMSCommLib.Ax MSComm' does not contain a definition
for 'InputMode'
I want to be able to use byte arrays with input data.
Therefore, I need to be able to change my inputmode to
binary.

Thank You

Pete.
Nov 15 '05 #1
6 6976
I recommend going with a RS232 library written in C# instead of using
interop. There's some good code at this article:

http://msdn.microsoft.com/msdnmag/is...m/default.aspx

Chris

"Peter Krikelis" <pk*******@hotm ail.com> wrote in message
news:07******** *************** *****@phx.gbl.. .
Hi All,

I am having a problem setting up input mode for serial
communications.

(Sorry about the long code post).

The following code is what I use to set up my comm port.
// Constructor for Form with an AxMSCommLib control on it
named "com"
public SerialTerm()
{
// Initialize Form Components
InitializeCompo nent();

// Initialize the COM Port control
InitComPort();
}

private void InitComPort()
{
// Set the com port to be 1

com.CommPort = 1;

// This port is already open, close it to reset it.

if (com.PortOpen) com.PortOpen = false;

// Trigger the OnComm event whenever data is received

com.RThreshold = 1;

// Set the port to 9600 baud, no parity bit, 8 data
bits, 1 stop bit (all standard)

com.Settings = "9600,n,8,1 ";

// Force the DTR line high, used sometimes to hang up
modems

com.DTREnable = true;

// No handshaking is used

com.Handshaking = 0;

// Don't mess with byte arrays, only works with
simple data (characters A-Z and numbers)

com.InputMode =
MSCommLib.Input ModeConstants.c omInputModeBina ry;

// Use this line instead for byte array input, best
for most communications

//com.InputMode =
MSCommLib.Input ModeConstants.c omInputModeText ;

// Read the entire waiting data when com.Input is used

com.InputLen = 0;

// Don't discard nulls, 0x00 is a useful byte

com.NullDiscard = false;

// Attach the event handler

com.OnComm += new System.EventHan dler(this.OnCom m);

// Open the com port

com.PortOpen = true;
}

The following is the compile error:

'AxMSCommLib.Ax MSComm' does not contain a definition
for 'InputMode'
I want to be able to use byte arrays with input data.
Therefore, I need to be able to change my inputmode to
binary.

Thank You

Pete.

Nov 15 '05 #2
Peter:

<snip>
The following is the compile error:

'AxMSCommLib.Ax MSComm' does not contain a definition
for 'InputMode'


Weird. I just checked, and sure enugh, the InputMode property doesn't pop up
in Intellisense in C#, but it _is_ there when using the same control in
VB.Net! (I also tried in VB6 and of course it's there too)

I wonder why C# doesn't like that property?

Norvin
Nov 15 '05 #3

Hi Peter,

Do you refer to the Microsoft Communication Control, version 6.0?
I have refered this control and no error generated for InputMode
property. The intellisence for this property also will generate.

Best regards,
Jeffrey Tan
Microsoft Online Partner Support
Get Secure! - www.microsoft.com/security
This posting is provided "as is" with no warranties and confers no rights.

--------------------
| Content-Class: urn:content-classes:message
| From: "Peter Krikelis" <pk*******@hotm ail.com>
| Sender: "Peter Krikelis" <pk*******@hotm ail.com>
| Subject: Setting Input mode for serial communications.
| Date: Thu, 11 Sep 2003 09:16:14 -0700
| Lines: 93
| Message-ID: <07************ *************** *@phx.gbl>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="iso-8859-1"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Thread-Index: AcN4gAXviZTgT34 ETUC920c2H2fSaw ==
| X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300
| Newsgroups: microsoft.publi c.dotnet.langua ges.csharp
| Path: cpmsftngxa06.ph x.gbl
| Xref: cpmsftngxa06.ph x.gbl microsoft.publi c.dotnet.langua ges.csharp:1841 41
| NNTP-Posting-Host: TK2MSFTNGXA08 10.40.1.160
| X-Tomcat-NG: microsoft.publi c.dotnet.langua ges.csharp
|
| Hi All,
|
| I am having a problem setting up input mode for serial
| communications.
|
| (Sorry about the long code post).
|
| The following code is what I use to set up my comm port.
|
|
| // Constructor for Form with an AxMSCommLib control on it
| named "com"
| public SerialTerm()
| {
| // Initialize Form Components
| InitializeCompo nent();
|
| // Initialize the COM Port control
| InitComPort();
|
|
| }
|
| private void InitComPort()
| {
| // Set the com port to be 1
|
| com.CommPort = 1;
|
| // This port is already open, close it to reset it.
|
| if (com.PortOpen) com.PortOpen = false;
|
| // Trigger the OnComm event whenever data is received
|
| com.RThreshold = 1;
|
| // Set the port to 9600 baud, no parity bit, 8 data
| bits, 1 stop bit (all standard)
|
| com.Settings = "9600,n,8,1 ";
|
| // Force the DTR line high, used sometimes to hang up
| modems
|
| com.DTREnable = true;
|
| // No handshaking is used
|
| com.Handshaking = 0;
|
| // Don't mess with byte arrays, only works with
| simple data (characters A-Z and numbers)
|
| com.InputMode =
| MSCommLib.Input ModeConstants.c omInputModeBina ry;
|
| // Use this line instead for byte array input, best
| for most communications
|
| //com.InputMode =
| MSCommLib.Input ModeConstants.c omInputModeText ;
|
| // Read the entire waiting data when com.Input is used
|
| com.InputLen = 0;
|
| // Don't discard nulls, 0x00 is a useful byte
|
| com.NullDiscard = false;
|
| // Attach the event handler
|
| com.OnComm += new System.EventHan dler(this.OnCom m);
|
| // Open the com port
|
| com.PortOpen = true;
| }
|
| The following is the compile error:
|
| 'AxMSCommLib.Ax MSComm' does not contain a definition
| for 'InputMode'
|
|
| I want to be able to use byte arrays with input data.
| Therefore, I need to be able to change my inputmode to
| binary.
|
| Thank You
|
| Pete.
|

Nov 15 '05 #4
Hi Jeffrey,

Thank you for your help. I go to References of the
Solution Explorer. Then I check the properties of both
AxMSCommLib and MSCommLib (both libraries are added when
the Microsoft Comm Control is added to the form) and
scroll down to Version, both read version 1.0. Is this
version you speak of? If so, how do I upgrade?

Thank You
Peter
-----Original Message-----

Hi Peter,

Do you refer to the Microsoft Communication Control, version 6.0?I have refered this control and no error generated for InputModeproperty. The intellisence for this property also will generate.
Best regards,
Jeffrey Tan
Microsoft Online Partner Support
Get Secure! - www.microsoft.com/security
This posting is provided "as is" with no warranties and confers no rights.
--------------------
| Content-Class: urn:content-classes:message
| From: "Peter Krikelis" <pk*******@hotm ail.com>
| Sender: "Peter Krikelis" <pk*******@hotm ail.com>
| Subject: Setting Input mode for serial communications.
| Date: Thu, 11 Sep 2003 09:16:14 -0700
| Lines: 93
| Message-ID: <07************ *************** *@phx.gbl>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="iso-8859-1"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Thread-Index: AcN4gAXviZTgT34 ETUC920c2H2fSaw ==
| X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300| Newsgroups: microsoft.publi c.dotnet.langua ges.csharp
| Path: cpmsftngxa06.ph x.gbl
| Xref: cpmsftngxa06.ph x.gbl microsoft.publi c.dotnet.langua ges.csharp:1841 41| NNTP-Posting-Host: TK2MSFTNGXA08 10.40.1.160
| X-Tomcat-NG: microsoft.publi c.dotnet.langua ges.csharp
|
| Hi All,
|
| I am having a problem setting up input mode for serial
| communications.
|
| (Sorry about the long code post).
|
| The following code is what I use to set up my comm port.|
|
| // Constructor for Form with an AxMSCommLib control on it| named "com"
| public SerialTerm()
| {
| // Initialize Form Components
| InitializeCompo nent();
|
| // Initialize the COM Port control
| InitComPort();
|
|
| }
|
| private void InitComPort()
| {
| // Set the com port to be 1
|
| com.CommPort = 1;
|
| // This port is already open, close it to reset it.
|
| if (com.PortOpen) com.PortOpen = false;
|
| // Trigger the OnComm event whenever data is received|
| com.RThreshold = 1;
|
| // Set the port to 9600 baud, no parity bit, 8 data| bits, 1 stop bit (all standard)
|
| com.Settings = "9600,n,8,1 ";
|
| // Force the DTR line high, used sometimes to hang up| modems
|
| com.DTREnable = true;
|
| // No handshaking is used
|
| com.Handshaking = 0;
|
| // Don't mess with byte arrays, only works with
| simple data (characters A-Z and numbers)
|
| com.InputMode =
| MSCommLib.Input ModeConstants.c omInputModeBina ry;
|
| // Use this line instead for byte array input, best| for most communications
|
| //com.InputMode =
| MSCommLib.Input ModeConstants.c omInputModeText ;
|
| // Read the entire waiting data when com.Input is used|
| com.InputLen = 0;
|
| // Don't discard nulls, 0x00 is a useful byte
|
| com.NullDiscard = false;
|
| // Attach the event handler
|
| com.OnComm += new System.EventHan dler (this.OnComm);|
| // Open the com port
|
| com.PortOpen = true;
| }
|
| The following is the compile error:
|
| 'AxMSCommLib.Ax MSComm' does not contain a definition
| for 'InputMode'
|
|
| I want to be able to use byte arrays with input data.
| Therefore, I need to be able to change my inputmode to
| binary.
|
| Thank You
|
| Pete.
|

.

Nov 15 '05 #5

Hi Peter,

My component's version is 1.1.
Do you refer this component by adding reference or by adding items in tool
box?
It seems of that there are different usage of these 2 ways.

For adding reference, you can invoke inputmode property like this:
MSCommLib.MSCom mClass obj=new MSCommLib.MSCom mClass();
obj.InputMode=. ..;

For adding item in tool box, you can do like this:
AxMSCommLib.AxM SComm obj=new AxMSCommLib.AxM SComm();
obj.InputMode=. ..;

Hope this helps.
Jeffrey Tan
Microsoft Online Partner Support
Get Secure! - www.microsoft.com/security
This posting is provided "as is" with no warranties and confers no rights.

--------------------
| Content-Class: urn:content-classes:message
| From: "Peter Krikelis" <pk*******@hotm ail.com>
| Sender: "Peter Krikelis" <pk*******@hotm ail.com>
| References: <07************ *************** *@phx.gbl>
<MK************ **@cpmsftngxa06 .phx.gbl>
| Subject: RE: Setting Input mode for serial communications.
| Date: Fri, 12 Sep 2003 05:31:36 -0700
| Lines: 160
| Message-ID: <24************ *************** *@phx.gbl>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="iso-8859-1"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300
| Thread-Index: AcN5Kc7U2PcBdk1 5SWuqSPwJoEZ85Q ==
| Newsgroups: microsoft.publi c.dotnet.langua ges.csharp
| Path: cpmsftngxa06.ph x.gbl
| Xref: cpmsftngxa06.ph x.gbl microsoft.publi c.dotnet.langua ges.csharp:1843 63
| NNTP-Posting-Host: TK2MSFTNGXA14 10.40.1.166
| X-Tomcat-NG: microsoft.publi c.dotnet.langua ges.csharp
|
| Hi Jeffrey,
|
| Thank you for your help. I go to References of the
| Solution Explorer. Then I check the properties of both
| AxMSCommLib and MSCommLib (both libraries are added when
| the Microsoft Comm Control is added to the form) and
| scroll down to Version, both read version 1.0. Is this
| version you speak of? If so, how do I upgrade?
|
| Thank You
| Peter
|
|
|
| >-----Original Message-----
| >
| >Hi Peter,
| >
| >Do you refer to the Microsoft Communication Control,
| version 6.0?
| >I have refered this control and no error generated for
| InputMode
| >property. The intellisence for this property also will
| generate.
| >
| >Best regards,
| >Jeffrey Tan
| >Microsoft Online Partner Support
| >Get Secure! - www.microsoft.com/security
| >This posting is provided "as is" with no warranties and
| confers no rights.
| >
| >--------------------
| >| Content-Class: urn:content-classes:message
| >| From: "Peter Krikelis" <pk*******@hotm ail.com>
| >| Sender: "Peter Krikelis" <pk*******@hotm ail.com>
| >| Subject: Setting Input mode for serial communications.
| >| Date: Thu, 11 Sep 2003 09:16:14 -0700
| >| Lines: 93
| >| Message-ID: <07************ *************** *@phx.gbl>
| >| MIME-Version: 1.0
| >| Content-Type: text/plain;
| >| charset="iso-8859-1"
| >| Content-Transfer-Encoding: 7bit
| >| X-Newsreader: Microsoft CDO for Windows 2000
| >| Thread-Index: AcN4gAXviZTgT34 ETUC920c2H2fSaw ==
| >| X-MimeOLE: Produced By Microsoft MimeOLE
| V5.50.4910.0300
| >| Newsgroups: microsoft.publi c.dotnet.langua ges.csharp
| >| Path: cpmsftngxa06.ph x.gbl
| >| Xref: cpmsftngxa06.ph x.gbl
| microsoft.publi c.dotnet.langua ges.csharp:1841 41
| >| NNTP-Posting-Host: TK2MSFTNGXA08 10.40.1.160
| >| X-Tomcat-NG: microsoft.publi c.dotnet.langua ges.csharp
| >|
| >| Hi All,
| >|
| >| I am having a problem setting up input mode for serial
| >| communications.
| >|
| >| (Sorry about the long code post).
| >|
| >| The following code is what I use to set up my comm
| port.
| >|
| >|
| >| // Constructor for Form with an AxMSCommLib control on
| it
| >| named "com"
| >| public SerialTerm()
| >| {
| >| // Initialize Form Components
| >| InitializeCompo nent();
| >|
| >| // Initialize the COM Port control
| >| InitComPort();
| >|
| >|
| >| }
| >|
| >| private void InitComPort()
| >| {
| >| // Set the com port to be 1
| >|
| >| com.CommPort = 1;
| >|
| >| // This port is already open, close it to reset it.
| >|
| >| if (com.PortOpen) com.PortOpen = false;
| >|
| >| // Trigger the OnComm event whenever data is
| received
| >|
| >| com.RThreshold = 1;
| >|
| >| // Set the port to 9600 baud, no parity bit, 8
| data
| >| bits, 1 stop bit (all standard)
| >|
| >| com.Settings = "9600,n,8,1 ";
| >|
| >| // Force the DTR line high, used sometimes to hang
| up
| >| modems
| >|
| >| com.DTREnable = true;
| >|
| >| // No handshaking is used
| >|
| >| com.Handshaking = 0;
| >|
| >| // Don't mess with byte arrays, only works with
| >| simple data (characters A-Z and numbers)
| >|
| >| com.InputMode =
| >| MSCommLib.Input ModeConstants.c omInputModeBina ry;
| >|
| >| // Use this line instead for byte array input,
| best
| >| for most communications
| >|
| >| //com.InputMode =
| >| MSCommLib.Input ModeConstants.c omInputModeText ;
| >|
| >| // Read the entire waiting data when com.Input is
| used
| >|
| >| com.InputLen = 0;
| >|
| >| // Don't discard nulls, 0x00 is a useful byte
| >|
| >| com.NullDiscard = false;
| >|
| >| // Attach the event handler
| >|
| >| com.OnComm += new System.EventHan dler
| (this.OnComm);
| >|
| >| // Open the com port
| >|
| >| com.PortOpen = true;
| >| }
| >|
| >| The following is the compile error:
| >|
| >| 'AxMSCommLib.Ax MSComm' does not contain a definition
| >| for 'InputMode'
| >|
| >|
| >| I want to be able to use byte arrays with input data.
| >| Therefore, I need to be able to change my inputmode to
| >| binary.
| >|
| >| Thank You
| >|
| >| Pete.
| >|
| >
| >.
| >
|

Nov 15 '05 #6
Here is a nice article on DOTNET Serial Communication
http://msdn.microsoft.com/msdnmag/is...m/default.aspx

"Chris Capel" <ch***@ibanktec h.net> wrote in message news:<#z******* *******@TK2MSFT NGP10.phx.gbl>. ..
I recommend going with a RS232 library written in C# instead of using
interop. There's some good code at this article:

http://msdn.microsoft.com/msdnmag/is...m/default.aspx

Chris

"Peter Krikelis" <pk*******@hotm ail.com> wrote in message
news:07******** *************** *****@phx.gbl.. .
Hi All,

I am having a problem setting up input mode for serial
communications.

(Sorry about the long code post).

The following code is what I use to set up my comm port.
// Constructor for Form with an AxMSCommLib control on it
named "com"
public SerialTerm()
{
// Initialize Form Components
InitializeCompo nent();

// Initialize the COM Port control
InitComPort();
}

private void InitComPort()
{
// Set the com port to be 1

com.CommPort = 1;

// This port is already open, close it to reset it.

if (com.PortOpen) com.PortOpen = false;

// Trigger the OnComm event whenever data is received

com.RThreshold = 1;

// Set the port to 9600 baud, no parity bit, 8 data
bits, 1 stop bit (all standard)

com.Settings = "9600,n,8,1 ";

// Force the DTR line high, used sometimes to hang up
modems

com.DTREnable = true;

// No handshaking is used

com.Handshaking = 0;

// Don't mess with byte arrays, only works with
simple data (characters A-Z and numbers)

com.InputMode =
MSCommLib.Input ModeConstants.c omInputModeBina ry;

// Use this line instead for byte array input, best
for most communications

//com.InputMode =
MSCommLib.Input ModeConstants.c omInputModeText ;

// Read the entire waiting data when com.Input is used

com.InputLen = 0;

// Don't discard nulls, 0x00 is a useful byte

com.NullDiscard = false;

// Attach the event handler

com.OnComm += new System.EventHan dler(this.OnCom m);

// Open the com port

com.PortOpen = true;
}

The following is the compile error:

'AxMSCommLib.Ax MSComm' does not contain a definition
for 'InputMode'
I want to be able to use byte arrays with input data.
Therefore, I need to be able to change my inputmode to
binary.

Thank You

Pete.

Nov 15 '05 #7

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

1
8836
by: Andreas Horneff | last post by:
Hi @ all, I've got a problem with serial communication in Borland C++ Builder. I've already found a lot of stuff about serial communication in the internet, but it dosen't work. What I want to do: I want to connect only one button to my com port. If the button is pressed,
4
15825
by: Ben Zhu | last post by:
I have a small project, which need use both RS232 port and excel for data plot. I considering use excel VB macro for the entire project. Although I used serial port extensively in MFC, I am not sure how to open serial port from VB. Can anyone give me a little light? Really appreciated,
3
3289
by: Essam | last post by:
Hi All I have two programs ; both of them I need to give read/write access to the same Comm Port. How can I do so; using Code or third party tool/library
0
2481
by: David | last post by:
I am having trouble with "ACCESS DENIED" error messages in a VB.NET 2003 application when attempting to open serial comms ports. The application has 2 ports that connect via serial cable to 2 different hardware devices to transfer binary data to the application. The setup screen enables the user to select COM1 -- COM8 via combo boax for each port. Then they click "Apply" to open the ports. The code that I have written to open the...
4
2987
by: Gary Frank | last post by:
I'd like to write a program in VB.Net that handles serial communications to several devices. VB.Net 2003 does not have adequate built-in serial communications. I heard that 2005 will have that. Has this serial communications functionality been built into 2005 Beta yet? If so, is there any reason I can't get the Beta and create the program with serial communications now?
8
2463
by: vicky | last post by:
Hello,I met a question when I wrote the program.I want the program can transmit the data frame continuosly through the RS232 when the communication has been interrupted.But I don't know how to write. I don't know how to record.Who can give me hand?Thanks very much!
5
2327
by: Franklin M. Gauer III | last post by:
Hi All, I've written an ASP.NET application (webservice) that does simple serial communications via the .NET 2.0 SerialComm object. The application runs fine on my development machine. The problem is when we try to deploy it to another machine we receive: ACCESS IS DENIED TO COM1 PORT. We have tried unsuccessfully to get this to work. We have tried the following: 1) Assign the IUSR.... account to Administrators
1
6493
by: laredotornado | last post by:
Hi, I'm using PHP 4.4.4 on Apache 2 on Fedora Core 5. PHP was installed using Apache's apxs and the php library was installed to /usr/local/php. However, when I set my "error_reporting" setting to be "E_ALL", notices are still not getting reported. The perms on my file are 664, with owner root and group root. The php.ini file is located at /usr/local/lib/php/php.ini. Any ideas why the setting does not seem to be having an effect? ...
5
9491
by: LongBow | last post by:
Hello, Is there a way, in .NET, to determine what are the avialable Serial (Communications) Ports on a Windows OS and is there a way to determine that port isn't being use other than attempting to opening the Serial Port and catching the associated exception? Thanks If there isn't a way to determine the Serial Port within .NET I would be willing, I guess, to use a WinAPI is that was the only way.
0
8611
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
0
8548
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
0
9090
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...
0
8811
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
0
7641
agi2029
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own.... Now, this would greatly impact the work of software developers. The idea...
1
6462
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
0
4564
by: adsilva | last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
1
2989
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
2
2244
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.