I am working with ASP.NET 2.0 and using an SQL Server 2000 database.
I am using Visual Studio 2005 and developing on my Local machine. I am
working with Login controls ASP.Configuration, I wanted to move my work
and needed to place it on the server.
Using VS 2005 , went to BUILD
-Publish Web Site
Checked the box for :: Alow this precompiled site to be updatable.
The files are all now sitting on my Server, and when I load my web site, it
loads the first default.aspx page that contains my LOGIN control. However,
when I try to login it is trying to load a SQL Server Express 2005 database.
Yet I am not using SQL Server 2005, and in my App_Data file folder I DO NOT
have an databasename.MDF inside it. However VS 2005 had created a file and
stuck it into my Project. I then receive the following error. See below:
Can anyone suggest why this is occurring and what I can do to resolve this
issue??
Why is it trying to perform an SQLExpress database file auto-creation error,
when I am using an SQL Server 2000 databse???
Any ideas would be greatly appreciated,
Thanks in advance,
Sincerely,
~Brad
___________________________________
ERROR: MESSAGE BELOW:
Server Error in '/gddb' Application.
An error has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: SQL Network Interfaces, error: 26 - Error Locating
Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the
current web request. Please review the stack trace for more information
about the error and where it originated in the code.
SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance using a
database location within the applications App_Data directory. The provider
attempted to automatically create the application services database because
the provider determined that the database does not exist. The following
configuration requirements are necessary to successfully check for existence
of the application services database and automatically create the
application services database:
1. If the applications App_Data directory does not already exist, the web
server account must have read and write access to the applications
directory. This is necessary because the web server account will
automatically create the App_Data directory if it does not already exist.
2. If the applications App_Data directory already exists, the web server
account only requires read and write access to the applications App_Data
directory. This is necessary because the web server account will attempt to
verify that the Sql Server Express database already exists within the
applications App_Data directory. Revoking read access on the App_Data
directory from the web server account will prevent the provider from
correctly determining if the Sql Server Express database already exists.
This will cause an error when the provider attempts to create a duplicate of
an already existing database. Write access is required because the web
server accounts credentials are used when creating the new database.
3. Sql Server Express must be installed on the machine.
4. The process identity for the web server account must have a local user
profile. See the readme document for details on how to create a local user
profile for both machine and domain accounts.
Source Error:
An unhandled exception was generated during the execution of the current web
request. Information regarding the origin and location of the exception can
be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a
connection to the server. When connecting to SQL Server 2005, this failure
may be caused by the fact that under the default settings SQL Server does
not allow remote connections. (provider: SQL Network Interfaces, error: 26 -
Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnErro r(SqlException
exception, Boolean breakConnection) +734947
System.Data.SqlClient.TdsParser.ThrowExceptionAndW arning(TdsParserStateObject
stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner,
Boolean& failoverDemandDone, String host, String failoverPartner, String
protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean
encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection
owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.Ope nLoginEnlist(SqlConnection
owningObject, SqlConnectionString connectionOptions, String newPassword,
Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ct or(DbConnectionPoolIdentity
identity, SqlConnectionString connectionOptions, Object providerInfo, String
newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
+170
System.Data.SqlClient.SqlConnectionFactory.CreateC onnection(DbConnectionOptions
options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection
owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.Creat eNonPooledConnection(DbConnection
owningConnection, DbConnectionPoolGroup poolGroup) +27
System.Data.ProviderBase.DbConnectionFactory.GetCo nnection(DbConnection
owningConnection) +47
System.Data.ProviderBase.DbConnectionClosed.OpenCo nnection(DbConnection
outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.Management.SqlServices.GetSqlConnection (String server, String
user, String password, Boolean trusted, String connectionString) +68
[HttpException (0x80004005): Unable to connect to SQL Server database.]
System.Web.Management.SqlServices.GetSqlConnection (String server, String
user, String password, Boolean trusted, String connectionString) +124
System.Web.Management.SqlServices.SetupApplication Services(String server,
String user, String password, Boolean trusted, String connectionString,
String database, String dbFileName, SqlFeatures features, Boolean install)
+86
System.Web.Management.SqlServices.Install(String database, String
dbFileName, String connectionString) +25
System.Web.DataAccess.SqlConnectionHelper.CreateMd fFile(String
fullFileName, String dataDir, String connectionString) +397
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET
Version:2.0.50727.210
4  2064 
Brad-
In your web.config, is your Membership provider specifying a connectionStringName?
For example, if you have a connectionString you are using for your membership
and roles called mySqlConnection, your provider would look similar to:
<membership>
<providers>
<clear/>
<add name="AspNetSqlMembershipProvider"
type="System.Web.Security.SqlMembershipProvider, System.Web,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" applicationName="/web"
connectionStringName="mySqlConnection"
/>
</providers>
</membership>
---
David Longnecker
Web Developer http://blog.tiredstudent.com
I am working with ASP.NET 2.0 and using an SQL Server 2000 database.
I am using Visual Studio 2005 and developing on my Local machine. I
am working with Login controls ASP.Configuration, I wanted to move my
work and needed to place it on the server.
Using VS 2005 , went to BUILD
-Publish Web Site
Checked the box for :: Alow this precompiled site to be updatable.
The files are all now sitting on my Server, and when I load my web
site, it loads the first default.aspx page that contains my LOGIN
control. However, when I try to login it is trying to load a SQL
Server Express 2005 database. Yet I am not using SQL Server 2005, and
in my App_Data file folder I DO NOT have an databasename.MDF inside
it. However VS 2005 had created a file and stuck it into my Project.
I then receive the following error. See below:
Can anyone suggest why this is occurring and what I can do to resolve
this issue??
Why is it trying to perform an SQLExpress database file auto-creation
error, when I am using an SQL Server 2000 databse???
Any ideas would be greatly appreciated,
Thanks in advance,
Sincerely,
~Brad
___________________________________
ERROR: MESSAGE BELOW:
Server Error in '/gddb' Application.
An error has occurred while establishing a connection to the server.
When
connecting to SQL Server 2005, this failure may be caused by the fact
that
under the default settings SQL Server does not allow remote
connections.
(provider: SQL Network Interfaces, error: 26 - Error Locating
Server/Instance Specified)
Description: An unhandled exception occurred during the execution of
the
current web request. Please review the stack trace for more
information
about the error and where it originated in the code.
SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance
using a
database location within the applications App_Data directory. The
provider
attempted to automatically create the application services database
because
the provider determined that the database does not exist. The
following
configuration requirements are necessary to successfully check for
existence
of the application services database and automatically create the
application services database:
1. If the applications App_Data directory does not already exist, the
web
server account must have read and write access to the applications
directory. This is necessary because the web server account will
automatically create the App_Data directory if it does not already
exist.
2. If the applications App_Data directory already exists, the web
server
account only requires read and write access to the applications
App_Data
directory. This is necessary because the web server account will
attempt to
verify that the Sql Server Express database already exists within the
applications App_Data directory. Revoking read access on the App_Data
directory from the web server account will prevent the provider from
correctly determining if the Sql Server Express database already
exists.
This will cause an error when the provider attempts to create a
duplicate of
an already existing database. Write access is required because the web
server accounts credentials are used when creating the new database.
3. Sql Server Express must be installed on the machine.
4. The process identity for the web server account must have a local
user
profile. See the readme document for details on how to create a local
user
profile for both machine and domain accounts.
Source Error:
An unhandled exception was generated during the execution of the
current web
request. Information regarding the origin and location of the
exception can
be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a
connection to the server. When connecting to SQL Server 2005, this
failure
may be caused by the fact that under the default settings SQL Server
does
not allow remote connections. (provider: SQL Network Interfaces,
error: 26 -
Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnErro r(SqlException
exception, Boolean breakConnection) +734947
System.Data.SqlClient.TdsParser.ThrowExceptionAndW arning(TdsParserStat
eObject
stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean&
useFailoverPartner,
Boolean& failoverDemandDone, String host, String failoverPartner,
String
protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire,
Boolean
encrypt, Boolean trustServerCert, Boolean integratedSecurity,
SqlConnection
owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.Ope nLoginEnlist(SqlConn
ection
owningObject, SqlConnectionString connectionOptions, String
newPassword,
Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ct or(DbConnectionPoolI
dentity
identity, SqlConnectionString connectionOptions, Object providerInfo,
String
newPassword, SqlConnection owningObject, Boolean
redirectedUserInstance)
+170
System.Data.SqlClient.SqlConnectionFactory.CreateC onnection(DbConnecti
onOptions
options, Object poolGroupProviderInfo, DbConnectionPool pool,
DbConnection
owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.Creat eNonPooledConnection
(DbConnection
owningConnection, DbConnectionPoolGroup poolGroup) +27
System.Data.ProviderBase.DbConnectionFactory.GetCo nnection(DbConnectio
n
owningConnection) +47
System.Data.ProviderBase.DbConnectionClosed.OpenCo nnection(DbConnectio
n
outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.Management.SqlServices.GetSqlConnection (String server,
String
user, String password, Boolean trusted, String connectionString) +68
[HttpException (0x80004005): Unable to connect to SQL Server
database.]
System.Web.Management.SqlServices.GetSqlConnection (String server,
String
user, String password, Boolean trusted, String connectionString) +124
System.Web.Management.SqlServices.SetupApplication Services(String
server,
String user, String password, Boolean trusted, String
connectionString,
String database, String dbFileName, SqlFeatures features, Boolean
install)
+86
System.Web.Management.SqlServices.Install(String database, String
dbFileName, String connectionString) +25
System.Web.DataAccess.SqlConnectionHelper.CreateMd fFile(String
fullFileName, String dataDir, String connectionString) +397
Version Information: Microsoft .NET Framework Version:2.0.50727.42;
ASP.NET Version:2.0.50727.210
Hi David,
My Web Config file See below ~
I am still wondering why I cannot get this to work...........I do not think
it has anything to do with the web config.
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
\Windows\Microsoft.Net\Framework\v2.x\Config
-->
<connectionStrings>
<remove name="governanceDirectorateConnectionString" />
<add name="governanceDirectorateConnectionString" connectionString="Data
Source=BRAD;Initial Catalog=governanceDirectorate;Integrated
Security=True"providerName="System.Data.SqlClient" />
</connectionStrings>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
Visual Basic options:
Set strict="true" to disallow all data type conversions
where data loss can occur.
Set explicit="true" to force declaration of all variables.
-->
<roleManager enabled="true" />
<compilation debug="true" strict="false" explicit="true">
<assemblies>
<add assembly="System.DirectoryServices, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=B03F5F7F11D50A3A"/></assemblies></compilation>
<pages>
<namespaces>
<clear/>
<add namespace="System"/>
<add namespace="System.Collections"/>
<add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/>
<add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/>
<add namespace="System.Web"/>
<add namespace="System.Web.Caching"/>
<add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/>
<add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/>
<add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/>
<add namespace="System.Web.UI.HtmlControls"/>
</namespaces>
</pages>
<!--
The <authenticationsection enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Forms">
<forms name="Login1" loginUrl="Login.aspx" />
</authentication>
<authorization>
<deny users="?" />
<allow roles="Admin" />
<deny roles="Content Editors" />
</authorization>
<membership>
<providers>
<add connectionStringName="governanceDirectorateConnect ionString"
applicationName="dataEntryTool" minRequiredPasswordLength="5"
minRequiredNonalphanumericCharacters="0" enablePasswordRetrieval="false"
enablePasswordReset="true" requiresQuestionAndAnswer="false"
requiresUniqueEmail="false" passwordFormat="Clear"
maxInvalidPasswordAttempts="5"
passwordAttemptWindow="10" passwordStrengthRegularExpression=""
name="CustomizedProvider" type="System.Web.Security.SqlMembershipProvider"
/>
</providers>
</membership>
<!--
The <customErrorssection enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
-->
<!-- GLOBALIZATION
This section sets the globalization settings of the application.
<globalization requestEncoding="utf-8" responseEncoding="utf-8"
fileEncoding="utf-8" culture="fr-FR" /-->
</system.web>
</configuration>
"David Longnecker" <dl*********@community.nospamwrote in message
news:46*************************@msnews.microsoft. com...
Brad-
In your web.config, is your Membership provider specifying a
connectionStringName?
For example, if you have a connectionString you are using for your
membership and roles called mySqlConnection, your provider would look
similar to:
<membership>
<providers>
<clear/>
<add name="AspNetSqlMembershipProvider"
type="System.Web.Security.SqlMembershipProvider, System.Web,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
applicationName="/web"
connectionStringName="mySqlConnection" />
</providers>
</membership>
---
David Longnecker
Web Developer
http://blog.tiredstudent.com
>I am working with ASP.NET 2.0 and using an SQL Server 2000 database.
I am using Visual Studio 2005 and developing on my Local machine. I
am working with Login controls ASP.Configuration, I wanted to move my
work and needed to place it on the server.
Using VS 2005 , went to BUILD
-Publish Web Site
Checked the box for :: Alow this precompiled site to be updatable.
The files are all now sitting on my Server, and when I load my web
site, it loads the first default.aspx page that contains my LOGIN
control. However, when I try to login it is trying to load a SQL
Server Express 2005 database. Yet I am not using SQL Server 2005, and
in my App_Data file folder I DO NOT have an databasename.MDF inside
it. However VS 2005 had created a file and stuck it into my Project.
I then receive the following error. See below:
Can anyone suggest why this is occurring and what I can do to resolve
this issue??
Why is it trying to perform an SQLExpress database file auto-creation
error, when I am using an SQL Server 2000 databse???
Any ideas would be greatly appreciated,
Thanks in advance,
Sincerely,
~Brad
___________________________________
ERROR: MESSAGE BELOW:
Server Error in '/gddb' Application.
An error has occurred while establishing a connection to the server.
When
connecting to SQL Server 2005, this failure may be caused by the fact
that
under the default settings SQL Server does not allow remote
connections.
(provider: SQL Network Interfaces, error: 26 - Error Locating
Server/Instance Specified)
Description: An unhandled exception occurred during the execution of
the
current web request. Please review the stack trace for more
information
about the error and where it originated in the code.
SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance
using a
database location within the applications App_Data directory. The
provider
attempted to automatically create the application services database
because
the provider determined that the database does not exist. The
following
configuration requirements are necessary to successfully check for
existence
of the application services database and automatically create the
application services database:
1. If the applications App_Data directory does not already exist, the
web
server account must have read and write access to the applications
directory. This is necessary because the web server account will
automatically create the App_Data directory if it does not already
exist.
2. If the applications App_Data directory already exists, the web
server
account only requires read and write access to the applications
App_Data
directory. This is necessary because the web server account will
attempt to
verify that the Sql Server Express database already exists within the
applications App_Data directory. Revoking read access on the App_Data
directory from the web server account will prevent the provider from
correctly determining if the Sql Server Express database already
exists.
This will cause an error when the provider attempts to create a
duplicate of
an already existing database. Write access is required because the web
server accounts credentials are used when creating the new database.
3. Sql Server Express must be installed on the machine.
4. The process identity for the web server account must have a local
user
profile. See the readme document for details on how to create a local
user
profile for both machine and domain accounts.
Source Error:
An unhandled exception was generated during the execution of the
current web
request. Information regarding the origin and location of the
exception can
be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a
connection to the server. When connecting to SQL Server 2005, this
failure
may be caused by the fact that under the default settings SQL Server
does
not allow remote connections. (provider: SQL Network Interfaces,
error: 26 -
Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnErr or(SqlException
exception, Boolean breakConnection) +734947
System.Data.SqlClient.TdsParser.ThrowExceptionAnd Warning(TdsParserStat
eObject
stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean &
useFailoverPartner,
Boolean& failoverDemandDone, String host, String failoverPartner,
String
protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire,
Boolean
encrypt, Boolean trustServerCert, Boolean integratedSecurity,
SqlConnection
owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.Op enLoginEnlist(SqlConn
ection
owningObject, SqlConnectionString connectionOptions, String
newPassword,
Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..c tor(DbConnectionPoolI
dentity
identity, SqlConnectionString connectionOptions, Object providerInfo,
String
newPassword, SqlConnection owningObject, Boolean
redirectedUserInstance)
+170
System.Data.SqlClient.SqlConnectionFactory.Create Connection(DbConnecti
onOptions
options, Object poolGroupProviderInfo, DbConnectionPool pool,
DbConnection
owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.Crea teNonPooledConnection
(DbConnection
owningConnection, DbConnectionPoolGroup poolGroup) +27
System.Data.ProviderBase.DbConnectionFactory.GetC onnection(DbConnectio
n
owningConnection) +47
System.Data.ProviderBase.DbConnectionClosed.OpenC onnection(DbConnectio
n
outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.Management.SqlServices.GetSqlConnectio n(String server,
String
user, String password, Boolean trusted, String connectionString) +68
[HttpException (0x80004005): Unable to connect to SQL Server
database.]
System.Web.Management.SqlServices.GetSqlConnectio n(String server,
String
user, String password, Boolean trusted, String connectionString) +124
System.Web.Management.SqlServices.SetupApplicatio nServices(String
server,
String user, String password, Boolean trusted, String
connectionString,
String database, String dbFileName, SqlFeatures features, Boolean
install)
+86
System.Web.Management.SqlServices.Install(Strin g database, String
dbFileName, String connectionString) +25
System.Web.DataAccess.SqlConnectionHelper.CreateM dfFile(String
fullFileName, String dataDir, String connectionString) +397
Version Information: Microsoft .NET Framework Version:2.0.50727.42;
ASP.NET Version:2.0.50727.210
Brad-
Just something to check... your specified applicationName and the web application
name are different... do you change that when it goes into production?
Your web config reads:
applicationName="dataEntryTool"
The error:
Server Error in '/gddb' Application.
You can check the real name of the Membership's application name by going
to your SQL Server (that you're using for authentication), open up the aspnet_Applications
table and view the LoweredApplicationName column. It also may be a convention
thing--I've never tried to make them different before.
Here's a snippet from a photo gallery I've been dinking with lately that
uses forums authentication (no other business-centric applications; everything
is AD-integrated).
<membership defaultProvider="CustomizedMembershipProvider">
<providers>
<clear/>
<add name="CustomizedMembershipProvider"
type="System.Web.Security.SqlMembershipProvider"
connectionStringName="photos"
enablePasswordRetrieval="false"
maxInvalidPasswordAttempts="5"
applicationName="/photos" />
</providers>
</membership>
If not in the web.config; there has to be some minute line somewhere referencing
SQLExpress. You mentioned that it went ahead and added a SQL Express base
in your App_Data directory (reading off your line: "However VS 2005 had created
a file and stuck it into my
Project"); if you exclude that file from your project--what breaks? ;)
-dl
---
David Longnecker
Web Developer http://blog.tiredstudent.com
Hi David,
My Web Config file See below ~
I am still wondering why I cannot get this to work...........I do not
think it has anything to do with the web config.
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
\Windows\Microsoft.Net\Framework\v2.x\Config
-->
<connectionStrings>
<remove name="governanceDirectorateConnectionString" />
<add name="governanceDirectorateConnectionString"
connectionString="Data Source=BRAD;Initial
Catalog=governanceDirectorate;Integrated
Security=True"providerName="System.Data.SqlClient" />
</connectionStrings>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
Visual Basic options:
Set strict="true" to disallow all data type conversions
where data loss can occur.
Set explicit="true" to force declaration of all variables.
-->
<roleManager enabled="true" />
<compilation debug="true" strict="false" explicit="true">
<assemblies>
<add assembly="System.DirectoryServices, Version=2.0.0.0,
Culture=neutral,
PublicKeyToken=B03F5F7F11D50A3A"/></assemblies></compilation>
<pages>
<namespaces>
<clear/>
<add namespace="System"/>
<add namespace="System.Collections"/>
<add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/>
<add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/>
<add namespace="System.Web"/>
<add namespace="System.Web.Caching"/>
<add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/>
<add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/>
<add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/>
<add namespace="System.Web.UI.HtmlControls"/>
</namespaces>
</pages>
<!--
The <authenticationsection enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Forms">
<forms name="Login1" loginUrl="Login.aspx" />
</authentication>
<authorization>
<deny users="?" />
<allow roles="Admin" />
<deny roles="Content Editors" />
</authorization>
<membership>
<providers>
<add connectionStringName="governanceDirectorateConnect ionString"
applicationName="dataEntryTool" minRequiredPasswordLength="5"
minRequiredNonalphanumericCharacters="0"
enablePasswordRetrieval="false"
enablePasswordReset="true" requiresQuestionAndAnswer="false"
requiresUniqueEmail="false" passwordFormat="Clear"
maxInvalidPasswordAttempts="5"
passwordAttemptWindow="10" passwordStrengthRegularExpression=""
name="CustomizedProvider"
type="System.Web.Security.SqlMembershipProvider" />
</providers>
</membership>
<!--
The <customErrorssection enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly"
defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
-->
<!-- GLOBALIZATION
This section sets the globalization settings of the application.
<globalization requestEncoding="utf-8" responseEncoding="utf-8"
fileEncoding="utf-8" culture="fr-FR" /-->
</system.web>
</configuration>
"David Longnecker" <dl*********@community.nospamwrote in message
news:46*************************@msnews.microsoft. com...
>Brad-
In your web.config, is your Membership provider specifying a
connectionStringName?
For example, if you have a connectionString you are using for your
membership and roles called mySqlConnection, your provider would look
similar to:
<membership>
<providers>
<clear/>
<add name="AspNetSqlMembershipProvider"
type="System.Web.Security.SqlMembershipProvider , System.Web,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
applicationName="/web"
connectionStringName="mySqlConnection" />
</providers>
</membership>
---
David Longnecker
Web Developer
http://blog.tiredstudent.com
>>I am working with ASP.NET 2.0 and using an SQL Server 2000 database.
I am using Visual Studio 2005 and developing on my Local machine.
I am working with Login controls ASP.Configuration, I wanted to move
my work and needed to place it on the server.
Using VS 2005 , went to BUILD
-Publish Web Site
Checked the box for :: Alow this precompiled site to be updatable.
The files are all now sitting on my Server, and when I load my web
site, it loads the first default.aspx page that contains my LOGIN
control. However, when I try to login it is trying to load a SQL
Server Express 2005 database. Yet I am not using SQL Server 2005,
and
in my App_Data file folder I DO NOT have an databasename.MDF inside
it. However VS 2005 had created a file and stuck it into my
Project.
I then receive the following error. See below:
Can anyone suggest why this is occurring and what I can do to
resolve this issue??
Why is it trying to perform an SQLExpress database file
auto-creation error, when I am using an SQL Server 2000 databse???
Any ideas would be greatly appreciated,
Thanks in advance,
Sincerely,
~Brad
___________________________________
ERROR: MESSAGE BELOW:
Server Error in '/gddb' Application.
An error has occurred while establishing a connection to the server.
When
connecting to SQL Server 2005, this failure may be caused by the
fact
that
under the default settings SQL Server does not allow remote
connections.
(provider: SQL Network Interfaces, error: 26 - Error Locating
Server/Instance Specified)
Description: An unhandled exception occurred during the execution of
the
current web request. Please review the stack trace for more
information
about the error and where it originated in the code.
SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance
using a
database location within the applications App_Data directory. The
provider
attempted to automatically create the application services database
because
the provider determined that the database does not exist. The
following
configuration requirements are necessary to successfully check for
existence
of the application services database and automatically create the
application services database:
1. If the applications App_Data directory does not already exist,
the
web
server account must have read and write access to the applications
directory. This is necessary because the web server account will
automatically create the App_Data directory if it does not already
exist.
2. If the applications App_Data directory already exists, the web
server
account only requires read and write access to the applications
App_Data
directory. This is necessary because the web server account will
attempt to
verify that the Sql Server Express database already exists within
the
applications App_Data directory. Revoking read access on the
App_Data
directory from the web server account will prevent the provider from
correctly determining if the Sql Server Express database already
exists.
This will cause an error when the provider attempts to create a
duplicate of
an already existing database. Write access is required because the
web
server accounts credentials are used when creating the new database.
3. Sql Server Express must be installed on the machine.
4. The process identity for the web server account must have a local
user
profile. See the readme document for details on how to create a
local
user
profile for both machine and domain accounts.
Source Error:
An unhandled exception was generated during the execution of the
current web
request. Information regarding the origin and location of the
exception can
be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing
a
connection to the server. When connecting to SQL Server 2005, this
failure
may be caused by the fact that under the default settings SQL Server
does
not allow remote connections. (provider: SQL Network Interfaces,
error: 26 -
Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnEr ror(SqlException
exception, Boolean breakConnection) +734947
System.Data.SqlClient.TdsParser.ThrowExceptionAn dWarning(TdsParserSt
at
eObject
stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolea n&
useFailoverPartner,
Boolean& failoverDemandDone, String host, String failoverPartner,
String
protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire,
Boolean
encrypt, Boolean trustServerCert, Boolean integratedSecurity,
SqlConnection
owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.O penLoginEnlist(SqlCo
nn
ection
owningObject, SqlConnectionString connectionOptions, String
newPassword,
Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds.. ctor(DbConnectionPoo
lI
dentity
identity, SqlConnectionString connectionOptions, Object
providerInfo,
String
newPassword, SqlConnection owningObject, Boolean
redirectedUserInstance)
+170
System.Data.SqlClient.SqlConnectionFactory.Creat eConnection(DbConnec
ti
onOptions
options, Object poolGroupProviderInfo, DbConnectionPool pool,
DbConnection
owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.Cre ateNonPooledConnecti
on
(DbConnection
owningConnection, DbConnectionPoolGroup poolGroup) +27
System.Data.ProviderBase.DbConnectionFactory.Get Connection(DbConnect
io
n
owningConnection) +47
System.Data.ProviderBase.DbConnectionClosed.Open Connection(DbConnect
io
n
outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.Management.SqlServices.GetSqlConnecti on(String server,
String
user, String password, Boolean trusted, String connectionString) +68
[HttpException (0x80004005): Unable to connect to SQL Server
database.]
System.Web.Management.SqlServices.GetSqlConnecti on(String server,
String
user, String password, Boolean trusted, String connectionString)
+124
System.Web.Management.SqlServices.SetupApplicati onServices(String
server,
String user, String password, Boolean trusted, String
connectionString,
String database, String dbFileName, SqlFeatures features, Boolean
install)
+86
System.Web.Management.SqlServices.Install(Stri ng database, String
dbFileName, String connectionString) +25
System.Web.DataAccess.SqlConnectionHelper.Create MdfFile(String
fullFileName, String dataDir, String connectionString) +397
Version Information: Microsoft .NET Framework Version:2.0.50727.42;
ASP.NET Version:2.0.50727.210
>>If not in the web.config; there has to be some minute line somewhere
>>referencing SQLExpress. You mentioned that it went ahead and added a SQL
Express base in your App_Data directory (reading off your line: "However
VS 2005 had created a file and stuck it into my
Project"); if you exclude that file from your project--what breaks? ;)
Hey David,
I am in the process of checking if and where it is referencing an SQLExpress
db.
In addition, I meant to say that I have EXCLUDED the SQL Express db file.MDF
from my App_Data but what seems to occur is that it is being recreated when
I PUBLISH my web site.
When I publish my web site, my Project folder contains an empty Data_App
folder ( I have deleted the .MDF file all together) because I am using an
SQL Server 2000 database for all my data.
What seems to occur is VS Studio 2005 recreates an empty file.MDF and places
it into my App_Data file folder and then my Project breaks because it trys
to use the SQLExpress database instead of my SQL Server 2000 --- It cannot
find the connectionString in the newly recreated SQLExpress database.
I am searching for where it may reference this SQLExpress file.
And I have googled this with out finding any resolutions to this issue.
Thanks for your input..........
Still trying to figure this issue out..................
~Brad
:)) ~ Stumped!
"David Longnecker" <dl*********@community.nospamwrote in message
news:46*************************@msnews.microsoft. com...
Brad-
Just something to check... your specified applicationName and the web
application name are different... do you change that when it goes into
production?
Your web config reads:
applicationName="dataEntryTool"
The error:
Server Error in '/gddb' Application.
You can check the real name of the Membership's application name by going
to your SQL Server (that you're using for authentication), open up the
aspnet_Applications table and view the LoweredApplicationName column. It
also may be a convention thing--I've never tried to make them different
before.
Here's a snippet from a photo gallery I've been dinking with lately that
uses forums authentication (no other business-centric applications;
everything is AD-integrated).
<membership defaultProvider="CustomizedMembershipProvider">
<providers>
<clear/>
<add name="CustomizedMembershipProvider"
type="System.Web.Security.SqlMembershipProvider"
connectionStringName="photos" enablePasswordRetrieval="false"
maxInvalidPasswordAttempts="5"
applicationName="/photos" />
</providers>
</membership>
If not in the web.config; there has to be some minute line somewhere
referencing SQLExpress. You mentioned that it went ahead and added a SQL
Express base in your App_Data directory (reading off your line: "However
VS 2005 had created a file and stuck it into my
Project"); if you exclude that file from your project--what breaks? ;)
-dl
---
David Longnecker
Web Developer
http://blog.tiredstudent.com
>Hi David,
My Web Config file See below ~
I am still wondering why I cannot get this to work...........I do not
think it has anything to do with the web config.
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
\Windows\Microsoft.Net\Framework\v2.x\Config
-->
<connectionStrings>
<remove name="governanceDirectorateConnectionString" />
<add name="governanceDirectorateConnectionString"
connectionString="Data Source=BRAD;Initial
Catalog=governanceDirectorate;Integrated
Security=True"providerName="System.Data.SqlClient " />
</connectionStrings>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
Visual Basic options:
Set strict="true" to disallow all data type conversions
where data loss can occur.
Set explicit="true" to force declaration of all variables.
-->
<roleManager enabled="true" />
<compilation debug="true" strict="false" explicit="true">
<assemblies>
<add assembly="System.DirectoryServices, Version=2.0.0.0,
Culture=neutral,
PublicKeyToken=B03F5F7F11D50A3A"/></assemblies></compilation>
<pages>
<namespaces>
<clear/>
<add namespace="System"/>
<add namespace="System.Collections"/>
<add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/>
<add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/>
<add namespace="System.Web"/>
<add namespace="System.Web.Caching"/>
<add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/>
<add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/>
<add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/>
<add namespace="System.Web.UI.HtmlControls"/>
</namespaces>
</pages>
<!--
The <authenticationsection enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Forms">
<forms name="Login1" loginUrl="Login.aspx" />
</authentication>
<authorization>
<deny users="?" />
<allow roles="Admin" />
<deny roles="Content Editors" />
</authorization>
<membership>
<providers>
<add connectionStringName="governanceDirectorateConnect ionString"
applicationName="dataEntryTool" minRequiredPasswordLength="5"
minRequiredNonalphanumericCharacters="0"
enablePasswordRetrieval="false"
enablePasswordReset="true" requiresQuestionAndAnswer="false"
requiresUniqueEmail="false" passwordFormat="Clear"
maxInvalidPasswordAttempts="5"
passwordAttemptWindow="10" passwordStrengthRegularExpression=""
name="CustomizedProvider"
type="System.Web.Security.SqlMembershipProvider " />
</providers>
</membership>
<!--
The <customErrorssection enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly"
defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
-->
<!-- GLOBALIZATION
This section sets the globalization settings of the application.
<globalization requestEncoding="utf-8" responseEncoding="utf-8"
fileEncoding="utf-8" culture="fr-FR" /-->
</system.web>
</configuration>
"David Longnecker" <dl*********@community.nospamwrote in message
news:46*************************@msnews.microsoft .com...
>>Brad-
In your web.config, is your Membership provider specifying a
connectionStringName?
For example, if you have a connectionString you are using for your
membership and roles called mySqlConnection, your provider would look
similar to:
<membership>
<providers>
<clear/>
<add name="AspNetSqlMembershipProvider"
type="System.Web.Security.SqlMembershipProvide r, System.Web,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
applicationName="/web"
connectionStringName="mySqlConnection" />
</providers>
</membership>
---
David Longnecker
Web Developer
http://blog.tiredstudent.com
I am working with ASP.NET 2.0 and using an SQL Server 2000 database.
I am using Visual Studio 2005 and developing on my Local machine.
I am working with Login controls ASP.Configuration, I wanted to move
my work and needed to place it on the server.
Using VS 2005 , went to BUILD
-Publish Web Site
Checked the box for :: Alow this precompiled site to be updatable.
The files are all now sitting on my Server, and when I load my web
site, it loads the first default.aspx page that contains my LOGIN
control. However, when I try to login it is trying to load a SQL
Server Express 2005 database. Yet I am not using SQL Server 2005,
and
in my App_Data file folder I DO NOT have an databasename.MDF inside
it. However VS 2005 had created a file and stuck it into my
Project.
I then receive the following error. See below:
Can anyone suggest why this is occurring and what I can do to
resolve this issue??
Why is it trying to perform an SQLExpress database file
auto-creation error, when I am using an SQL Server 2000 databse???
Any ideas would be greatly appreciated,
Thanks in advance,
Sincerely,
~Brad
___________________________________
ERROR: MESSAGE BELOW:
Server Error in '/gddb' Application.
An error has occurred while establishing a connection to the server.
When
connecting to SQL Server 2005, this failure may be caused by the
fact
that
under the default settings SQL Server does not allow remote
connections.
(provider: SQL Network Interfaces, error: 26 - Error Locating
Server/Instance Specified)
Description: An unhandled exception occurred during the execution of
the
current web request. Please review the stack trace for more
information
about the error and where it originated in the code.
SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance
using a
database location within the applications App_Data directory. The
provider
attempted to automatically create the application services database
because
the provider determined that the database does not exist. The
following
configuration requirements are necessary to successfully check for
existence
of the application services database and automatically create the
application services database:
1. If the applications App_Data directory does not already exist,
the
web
server account must have read and write access to the applications
directory. This is necessary because the web server account will
automatically create the App_Data directory if it does not already
exist.
2. If the applications App_Data directory already exists, the web
server
account only requires read and write access to the applications
App_Data
directory. This is necessary because the web server account will
attempt to
verify that the Sql Server Express database already exists within
the
applications App_Data directory. Revoking read access on the
App_Data
directory from the web server account will prevent the provider from
correctly determining if the Sql Server Express database already
exists.
This will cause an error when the provider attempts to create a
duplicate of
an already existing database. Write access is required because the
web
server accounts credentials are used when creating the new database.
3. Sql Server Express must be installed on the machine.
4. The process identity for the web server account must have a local
user
profile. See the readme document for details on how to create a
local
user
profile for both machine and domain accounts.
Source Error:
An unhandled exception was generated during the execution of the
current web
request. Information regarding the origin and location of the
exception can
be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing
a
connection to the server. When connecting to SQL Server 2005, this
failure
may be caused by the fact that under the default settings SQL Server
does
not allow remote connections. (provider: SQL Network Interfaces,
error: 26 -
Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnE rror(SqlException
exception, Boolean breakConnection) +734947
System.Data.SqlClient.TdsParser.ThrowExceptionA ndWarning(TdsParserSt
at
eObject
stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean &
useFailoverPartner,
Boolean& failoverDemandDone, String host, String failoverPartner,
String
protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire,
Boolean
encrypt, Boolean trustServerCert, Boolean integratedSecurity,
SqlConnection
owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds. OpenLoginEnlist(SqlCo
nn
ection
owningObject, SqlConnectionString connectionOptions, String
newPassword,
Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds. .ctor(DbConnectionPoo
lI
dentity
identity, SqlConnectionString connectionOptions, Object
providerInfo,
String
newPassword, SqlConnection owningObject, Boolean
redirectedUserInstance)
+170
System.Data.SqlClient.SqlConnectionFactory.Crea teConnection(DbConnec
ti
onOptions
options, Object poolGroupProviderInfo, DbConnectionPool pool,
DbConnection
owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.Cr eateNonPooledConnecti
on
(DbConnection
owningConnection, DbConnectionPoolGroup poolGroup) +27
System.Data.ProviderBase.DbConnectionFactory.Ge tConnection(DbConnect
io
n
owningConnection) +47
System.Data.ProviderBase.DbConnectionClosed.Ope nConnection(DbConnect
io
n
outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.Management.SqlServices.GetSqlConnect ion(String server,
String
user, String password, Boolean trusted, String connectionString) +68
[HttpException (0x80004005): Unable to connect to SQL Server
database.]
System.Web.Management.SqlServices.GetSqlConnect ion(String server,
String
user, String password, Boolean trusted, String connectionString)
+124
System.Web.Management.SqlServices.SetupApplicat ionServices(String
server,
String user, String password, Boolean trusted, String
connectionString,
String database, String dbFileName, SqlFeatures features, Boolean
install)
+86
System.Web.Management.SqlServices.Install(Strin g database, String
dbFileName, String connectionString) +25
System.Web.DataAccess.SqlConnectionHelper.Creat eMdfFile(String
fullFileName, String dataDir, String connectionString) +397
Version Information: Microsoft .NET Framework Version:2.0.50727.42;
ASP.NET Version:2.0.50727.210
This discussion thread is closed Replies have been disabled for this discussion. Similar topics
3 posts
views
Thread by laurie |
last post: by
|
1 post
views
Thread by the_proud_family |
last post: by
|
reply
views
Thread by Kurt Watson |
last post: by
|
12 posts
views
Thread by Christo |
last post: by
|
7 posts
views
Thread by x muzuo |
last post: by
|
5 posts
views
Thread by Craig Keightley |
last post: by
|
17 posts
views
Thread by JT |
last post: by
|
7 posts
views
Thread by tyler_durden |
last post: by
|
23 posts
views
Thread by Jason |
last post: by
|
2 posts
views
Thread by =?Utf-8?B?U2NvdHRSYWREZXY=?= |
last post: by
| | | | | | | | | | | | | | | | | | | |
