I have the need to notify myself of certain website events via an SMS to my
mobile phone.
I have never done this but presume I need an SMS gateway to send my
XML/message to in order to get it onto the mobile network?
Can anyone recommend a (free would be nice, but I doubt this is
possible...!) service or method I can use? I am in the UK and I only want to
send SMS to one mobile phone.
Thanks,
JJ
5  1052 
"JJ" <ab*@xyz.comwrote in message
news:%2****************@TK2MSFTNGP02.phx.gbl...
Can anyone recommend a (free would be nice, but I doubt this is
possible...!) service or method I can use? I am in the UK and I only want
to send SMS to one mobile phone.
1) Launch your internet browser (e.g. IE, FireFox, Opera, Netscape etc)
2) Navigate to http://www.google.co.uk
3) Enter the text below in the box:
"ASP.NET" SMS UK
4) Hit the button
Mark,
Many thanks for your reply. I realise most questions can be answered using
that method, but I am acutally looking for recommendations based on my
limited usage requirements rather than a complete list of all such services.
I was hoping someone might have used a cheap reliable solution that they can
recommend.
JJ
"Mark Rae" <ma**@markNOSPAMrae.comwrote in message
news:eD**************@TK2MSFTNGP04.phx.gbl...
"JJ" <ab*@xyz.comwrote in message
news:%2****************@TK2MSFTNGP02.phx.gbl...
>Can anyone recommend a (free would be nice, but I doubt this is
possible...!) service or method I can use? I am in the UK and I only want
to send SMS to one mobile phone.
1) Launch your internet browser (e.g. IE, FireFox, Opera, Netscape etc)
2) Navigate to http://www.google.co.uk
3) Enter the text below in the box:
"ASP.NET" SMS UK
4) Hit the button
Assuming you have your own webserver, you can do it with an old phone, a
cable for the phone - and a gateway like nowsms. Its a very reliable
approach for the scale your on about - however, its not for free. Another
approach is to use the Hayes AT commands if your modem supports them in your
mobile phone, you'll need to resort to trawling the web for examples though.
--
Regards
John Timney (MVP)
VISIT MY WEBSITE: http://www.johntimney.com http://www.johntimney.com/blog
"JJ" <ab*@xyz.comwrote in message
news:eg**************@TK2MSFTNGP03.phx.gbl...
Mark,
Many thanks for your reply. I realise most questions can be answered using
that method, but I am acutally looking for recommendations based on my
limited usage requirements rather than a complete list of all such
services.
I was hoping someone might have used a cheap reliable solution that they
can recommend.
JJ
"Mark Rae" <ma**@markNOSPAMrae.comwrote in message
news:eD**************@TK2MSFTNGP04.phx.gbl...
>"JJ" <ab*@xyz.comwrote in message
news:%2****************@TK2MSFTNGP02.phx.gbl...
>>Can anyone recommend a (free would be nice, but I doubt this is
possible...!) service or method I can use? I am in the UK and I only
want to send SMS to one mobile phone.
1) Launch your internet browser (e.g. IE, FireFox, Opera, Netscape etc)
2) Navigate to http://www.google.co.uk
3) Enter the text below in the box:
"ASP.NET" SMS UK
4) Hit the button
Dear John,
That sounds just what I was looking for - will look into it.
Thank you very much for your time,
JJ
"John Timney (MVP)" <x_****@timney.eclipse.co.ukwrote in message
news:Sb*********************@eclipse.net.uk...
Assuming you have your own webserver, you can do it with an old phone, a
cable for the phone - and a gateway like nowsms. Its a very reliable
approach for the scale your on about - however, its not for free. Another
approach is to use the Hayes AT commands if your modem supports them in
your mobile phone, you'll need to resort to trawling the web for examples
though.
--
Regards
John Timney (MVP)
VISIT MY WEBSITE:
http://www.johntimney.com
http://www.johntimney.com/blog
"JJ" <ab*@xyz.comwrote in message
news:eg**************@TK2MSFTNGP03.phx.gbl...
>Mark,
Many thanks for your reply. I realise most questions can be answered
using that method, but I am acutally looking for recommendations based on
my limited usage requirements rather than a complete list of all such
services.
I was hoping someone might have used a cheap reliable solution that they
can recommend.
JJ
"Mark Rae" <ma**@markNOSPAMrae.comwrote in message
news:eD**************@TK2MSFTNGP04.phx.gbl...
>>"JJ" <ab*@xyz.comwrote in message
news:%2****************@TK2MSFTNGP02.phx.gbl.. .
Can anyone recommend a (free would be nice, but I doubt this is
possible...!) service or method I can use? I am in the UK and I only
want to send SMS to one mobile phone.
1) Launch your internet browser (e.g. IE, FireFox, Opera, Netscape etc)
2) Navigate to http://www.google.co.uk
3) Enter the text below in the box:
"ASP.NET" SMS UK
4) Hit the button
If you got a GSM phone and data cable, you can setup VisualGSM Lite, a
freeware SMS sender - http://www.sms-gateway-software.com. A setup like this is ok for
adhoc messaging. For bulk blasting, you'll need an internet SMS
Gateway.
On Dec 31 2006, 12:25 am, "JJ" <a...@xyz.comwrote:
I have the need to notify myself of certain website events via an SMS to my
mobile phone.
I have never done this but presume I need anSMS gatewayto send my
XML/message to in order to get it onto the mobile network?
Can anyone recommend a (free would be nice, but I doubt this is
possible...!) service or method I can use? I am in the UK and I only want to
send SMS to one mobile phone.
Thanks,
JJ
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics
by: OldGuy |
last post by:
Hi All
Sendmail 8.12.11
php 4.3.9
Sendmail is installed and works properly.
php is NOT in safemode
from the command line; mail user@domain.com < testmsg works fine.
|
by: System Attendant |
last post by:
ScanMail for Microsoft Exchange took action on the message. The message
details were:
Sender = segphault@sbcglobal.net
Recipient(s) = python-list@python.org;
Subject = Python-list Digest, Vol 9,...
|
by: bartek.rylko |
last post by:
Hi all, Any one got idea about how to set undisclosed recipient? I put
all recipient in BCC field while the To field don't want to leave
blank. but neither fail to place an empty email address nor...
|
by: dixie |
last post by:
I have a command to open the Access Options dialogue from code:
DoCmd.RunCommand acCmdOptions
It also opens the Database Window behind it. Is it possible to open the
Options without having...
|
by: hb |
last post by:
Hi,
I am migrate an ASP.Net site from a Windows 2000 Server to a Windows 2003
Server.
But the email function stops working on Windows 2003 Server for this error:
===
The server rejected one or...
|
by: Li Pang |
last post by:
Hi,
I made a service to manage emails. It must identify each email by its
suject, from (sender) and to (recipient). I can get subject value by using
objMsg.Subject
but could not find the...
|
by: Al Reid |
last post by:
I'm using VB2005. What I would like to do is to attach a file to an email message and launch the default mail client, just like the
Windows Explorer Send To Mail Recipient does it. The file is...
|
by: Bob |
last post by:
There seems to be a problem when using System.Net.Mail to send emails to
multiple recipients when one or more of the recipient addresses is incorrect
and the destination SMTP server is using...
|
by: whiskeylima64 |
last post by:
I'm a newbie in oracle 10g - I was hoping if some one could walk me through writing a trigger function for this particular problem:
the scenario:
" ... the practice is called backdating because...
|
by: AR123 |
last post by:
Hi
I have a created a form. I have a field called Type with options A or B. I want to have my form so that it you select option A the rest of the form will appear and the Email Recepient field will...
|
by: CloudSolutions |
last post by:
Introduction:
For many beginners and individual users, requiring a credit card and email registration may pose a barrier when starting to use cloud servers. However, some cloud server providers now...
|
by: Faith0G |
last post by:
I am starting a new it consulting business and it's been a while since I setup a new website. Is wordpress still the best web based software for hosting a 5 page website? The webpages will be...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 3 Apr 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome former...
|
by: ryjfgjl |
last post by:
In our work, we often need to import Excel data into databases (such as MySQL, SQL Server, Oracle) for data analysis and processing. Usually, we use database tools like Navicat or the Excel import...
|
by: taylorcarr |
last post by:
A Canon printer is a smart device known for being advanced, efficient, and reliable. It is designed for home, office, and hybrid workspace use and can also be used for a variety of purposes. However,...
|
by: ryjfgjl |
last post by:
If we have dozens or hundreds of excel to import into the database, if we use the excel import function provided by database editors such as navicat, it will be extremely tedious and time-consuming...
|
by: ryjfgjl |
last post by:
In our work, we often receive Excel tables with data in the same format. If we want to analyze these data, it can be difficult to analyze them because the data is spread across multiple Excel files...
|
by: BarryA |
last post by:
What are the essential steps and strategies outlined in the Data Structures and Algorithms (DSA) roadmap for aspiring data scientists? How can individuals effectively utilize this roadmap to progress...
|
by: nemocccc |
last post by:
hello, everyone, I want to develop a software for my android phone for daily needs, any suggestions?
| |
