|
P: n/a
|
On winXP with VSTE for software developers installed,
I downloaded and installed vs2005 sp1
during the install i was informed that I had to uninstall the web
application project package
I did the uninstall of the wap and restarted the install
everything seemed to go fine with the sp install after that
however when I try to open an existing web application project or create a
new web application project i get the following error :
Package Load Failure
Package
'Microsoft.VisualStudio.Web.Application.WAPackage, Microsoft.VisualStudio.Web.Application,Version=8.0 .0.0,Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a' has failed to load properly ( GUID =
{349C5850-65DF-11DA-9384-00065B846F21}.) Please contact package
vendor for assistance. ...
restarting the machine , reinstalling the sp has had no effect.
googling for this error has returned no results.
I don't see any uninstall for SP1 - so short of reinstalling windows and
VS - what do i do ?
Gerry
| |
Share this Question
|
P: n/a
|
Run DEVENV /InstallVSTemplates
from a command prompt.
Peter
Site: http://www.eggheadcafe.com
UnBlog: http://petesbloggerama.blogspot.com
Short urls & more: http://ittyurl.net
"gerry" wrote:
On winXP with VSTE for software developers installed,
I downloaded and installed vs2005 sp1
during the install i was informed that I had to uninstall the web
application project package
I did the uninstall of the wap and restarted the install
everything seemed to go fine with the sp install after that
however when I try to open an existing web application project or create a
new web application project i get the following error :
Package Load Failure
Package
'Microsoft.VisualStudio.Web.Application.WAPackage, Microsoft.VisualStudio.Web.Application,Version=8.0 .0.0,Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a' has failed to load properly ( GUID =
{349C5850-65DF-11DA-9384-00065B846F21}.) Please contact package
vendor for assistance. ...
restarting the machine , reinstalling the sp has had no effect.
googling for this error has returned no results.
I don't see any uninstall for SP1 - so short of reinstalling windows and
VS - what do i do ?
Gerry
| |
|
P: n/a
|
Thanks Peter but this didn't help - same problem persists
"Peter Bromberg [C# MVP]" <pb*******@yahoo.yabbadabbadoo.comwrote in
message news:DE**********************************@microsof t.com...
Run DEVENV /InstallVSTemplates
from a command prompt.
Peter
Site: http://www.eggheadcafe.com
UnBlog: http://petesbloggerama.blogspot.com
Short urls & more: http://ittyurl.net
"gerry" wrote:
>On winXP with VSTE for software developers installed,
I downloaded and installed vs2005 sp1
during the install i was informed that I had to uninstall the web
application project package
I did the uninstall of the wap and restarted the install
everything seemed to go fine with the sp install after that
however when I try to open an existing web application project or create
a
new web application project i get the following error :
Package Load Failure
Package
'Microsoft.VisualStudio.Web.Application.WAPackage ,Microsoft.VisualStudio.Web.Application,Version=8. 0.0.0,Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a' has failed to load properly ( GUID =
{349C5850-65DF-11DA-9384-00065B846F21}.) Please contact package
vendor for assistance. ...
restarting the machine , reinstalling the sp has had no effect.
googling for this error has returned no results.
I don't see any uninstall for SP1 - so short of reinstalling windows and
VS - what do i do ?
Gerry
| |
|
P: n/a
|
I went to Add or Remove Programs, find Microsoft Visual Studio 2005 Web
Application Projects.
Click on it, then click on "Change"
Choose Repair on the Popup Dialog.
Fixed this issue for me
Stevepro
gerry wrote:
Thanks Peter but this didn't help - same problem persists
"Peter Bromberg [C# MVP]" <pb*******@yahoo.yabbadabbadoo.comwrote in
message news:DE**********************************@microsof t.com...
Run DEVENV /InstallVSTemplates
from a command prompt.
Peter
Site: http://www.eggheadcafe.com
UnBlog: http://petesbloggerama.blogspot.com
Short urls & more: http://ittyurl.net
"gerry" wrote:
On winXP with VSTE for software developers installed,
I downloaded and installed vs2005 sp1
during the install i was informed that I had to uninstall the web
application project package
I did the uninstall of the wap and restarted the install
everything seemed to go fine with the sp install after that
however when I try to open an existing web application project or create
a
new web application project i get the following error :
Package Load Failure
Package
'Microsoft.VisualStudio.Web.Application.WAPackage, Microsoft.VisualStudio.Web.Application,Version=8.0 .0.0,Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a' has failed to load properly ( GUID =
{349C5850-65DF-11DA-9384-00065B846F21}.) Please contact package
vendor for assistance. ...
restarting the machine , reinstalling the sp has had no effect.
googling for this error has returned no results.
I don't see any uninstall for SP1 - so short of reinstalling windows and
VS - what do i do ?
Gerry
| |
|
P: n/a
|
Hi Steve,
I had to do a complete uninstall of WAP before the SP would install. It
doesn't appear in the Add/Remove applictaion list - did you reinstall the
older pre-SP1 WAP package?
I am just waiting for a chance to do a complete os reinstall assuming that
that will fix things up.
Gerry
<st***@code5systems.comwrote in message
news:11**********************@m58g2000cwm.googlegr oups.com...
>I went to Add or Remove Programs, find Microsoft Visual Studio 2005 Web
Application Projects.
Click on it, then click on "Change"
Choose Repair on the Popup Dialog.
Fixed this issue for me
Stevepro
gerry wrote:
>Thanks Peter but this didn't help - same problem persists
"Peter Bromberg [C# MVP]" <pb*******@yahoo.yabbadabbadoo.comwrote in
message news:DE**********************************@microsof t.com...
Run DEVENV /InstallVSTemplates
from a command prompt.
Peter
Site: http://www.eggheadcafe.com
UnBlog: http://petesbloggerama.blogspot.com
Short urls & more: http://ittyurl.net
"gerry" wrote:
On winXP with VSTE for software developers installed,
I downloaded and installed vs2005 sp1
during the install i was informed that I had to uninstall the web
application project package
I did the uninstall of the wap and restarted the install
everything seemed to go fine with the sp install after that
however when I try to open an existing web application project or
create
a
new web application project i get the following error :
Package Load Failure
Package
'Microsoft.VisualStudio.Web.Application.WAPackage ,Microsoft.VisualStudio.Web.Application,Version=8. 0.0.0,Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a' has failed to load properly ( GUID =
{349C5850-65DF-11DA-9384-00065B846F21}.) Please contact package
vendor for assistance. ...
restarting the machine , reinstalling the sp has had no effect.
googling for this error has returned no results.
I don't see any uninstall for SP1 - so short of reinstalling windows
and
VS - what do i do ?
Gerry
| |
|
P: n/a
|
Hi,
I've reinstalled the Web Application Projects
( http://msdn2.microsoft.com/en-us/asp.net/aa336618.aspx, this itself
wants another component installed: VS80-KB915364-X86-ENU.exe). Now
everythign is working ok agian.
Hope this helps
Ian
gerry wrote:
Hi Steve,
I had to do a complete uninstall of WAP before the SP would install. It
doesn't appear in the Add/Remove applictaion list - did you reinstall the
older pre-SP1 WAP package?
I am just waiting for a chance to do a complete os reinstall assuming that
that will fix things up.
Gerry
<st***@code5systems.comwrote in message
news:11**********************@m58g2000cwm.googlegr oups.com...
I went to Add or Remove Programs, find Microsoft Visual Studio 2005 Web
Application Projects.
Click on it, then click on "Change"
Choose Repair on the Popup Dialog.
Fixed this issue for me
Stevepro
gerry wrote:
Thanks Peter but this didn't help - same problem persists
"Peter Bromberg [C# MVP]" <pb*******@yahoo.yabbadabbadoo.comwrote in
message news:DE**********************************@microsof t.com...
Run DEVENV /InstallVSTemplates
from a command prompt.
Peter
Site: http://www.eggheadcafe.com
UnBlog: http://petesbloggerama.blogspot.com
Short urls & more: http://ittyurl.net
"gerry" wrote:
On winXP with VSTE for software developers installed,
I downloaded and installed vs2005 sp1
during the install i was informed that I had to uninstall the web
application project package
I did the uninstall of the wap and restarted the install
everything seemed to go fine with the sp install after that
however when I try to open an existing web application project or
create
a
new web application project i get the following error :
Package Load Failure
Package
'Microsoft.VisualStudio.Web.Application.WAPackage, Microsoft.VisualStudio.Web.Application,Version=8.0 .0.0,Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a' has failed to load properly ( GUID =
{349C5850-65DF-11DA-9384-00065B846F21}.) Please contact package
vendor for assistance. ...
restarting the machine , reinstalling the sp has had no effect.
googling for this error has returned no results.
I don't see any uninstall for SP1 - so short of reinstalling windows
and
VS - what do i do ?
Gerry
| |
|
P: n/a
|
so does this mean that WAP is not actually installed as part of SP1 ?
<ia******@googlemail.comwrote in message
news:11*********************@51g2000cwl.googlegrou ps.com...
Hi,
I've reinstalled the Web Application Projects
(http://msdn2.microsoft.com/en-us/asp.net/aa336618.aspx, this itself
wants another component installed: VS80-KB915364-X86-ENU.exe). Now
everythign is working ok agian.
Hope this helps
Ian
gerry wrote:
>Hi Steve,
I had to do a complete uninstall of WAP before the SP would install. It
doesn't appear in the Add/Remove applictaion list - did you reinstall the
older pre-SP1 WAP package?
I am just waiting for a chance to do a complete os reinstall assuming
that
that will fix things up.
Gerry
<st***@code5systems.comwrote in message
news:11**********************@m58g2000cwm.googleg roups.com...
>I went to Add or Remove Programs, find Microsoft Visual Studio 2005 Web
Application Projects.
Click on it, then click on "Change"
Choose Repair on the Popup Dialog.
Fixed this issue for me
Stevepro
gerry wrote:
Thanks Peter but this didn't help - same problem persists
"Peter Bromberg [C# MVP]" <pb*******@yahoo.yabbadabbadoo.comwrote in
message news:DE**********************************@microsof t.com...
Run DEVENV /InstallVSTemplates
from a command prompt.
Peter
Site: http://www.eggheadcafe.com
UnBlog: http://petesbloggerama.blogspot.com
Short urls & more: http://ittyurl.net
"gerry" wrote:
On winXP with VSTE for software developers installed,
I downloaded and installed vs2005 sp1
during the install i was informed that I had to uninstall the web
application project package
I did the uninstall of the wap and restarted the install
everything seemed to go fine with the sp install after that
however when I try to open an existing web application project or
create
a
new web application project i get the following error :
Package Load Failure
Package
'Microsoft.VisualStudio.Web.Application.WAPackage ,Microsoft.VisualStudio.Web.Application,Version=8. 0.0.0,Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a' has failed to load properly ( GUID
=
{349C5850-65DF-11DA-9384-00065B846F21}.) Please contact package
vendor for assistance. ...
restarting the machine , reinstalling the sp has had no effect.
googling for this error has returned no results.
I don't see any uninstall for SP1 - so short of reinstalling
windows
and
VS - what do i do ?
Gerry
| | This discussion thread is closed Replies have been disabled for this discussion. | |  Question stats - viewed: 3780
- replies: 6
- date asked: Dec 28 '06
|
