473,857 Members | 1,969 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Accessing Wizard Next/Prev buttons

I have a Wizard page and need to affect the next and previous buttons from
my code-behind. I've googled around and found two solutions, and neither
appear to work.

I can access the SideBarList steps successfully with the following code...

Control myContainer =
(Control)Wizard 1.FindControl(" SideBarContaine r");
DataList mySideBarList =
(DataList)myCon tainer.FindCont rol("SideBarLis t");
mySideBarList.E nabled = false;

Trying to take this approach with the StepNavigationT emplate does not seem
to work. I first converted the step navigation to a template but I cannot
get findcontrol to find anything in "StepNavigation Container" or
"StepNavigation Template" or anything else I can think of.

I have also tried putting .hidden {display:none} in my .css file and ....

protected void Wizard1_ActiveS tepChanged(obje ct sender, EventArgs e)
{
if (Wizard1.Active StepIndex == 3)
{
Wizard1.StepPre viousButtonStyl e.CssClass = "hidden";
Wizard1.StepNex tButtonStyle.Cs sClass = "hidden";
}
}

This has the effect of not working when goint to step 3 as the Prev/finish
still show. However if the prev button is hit, step 2 shows with the next
button not visible.

Is there a solution to this problem? Is there a reliable way to access
these buttons?

Thanks,
Gary

Jun 27 '08 #1
8 10851
Your code in the Wizard1_load event has the effect of not taking effect
until the user hits the previous button that was supposed to be non-visible.
then when we go back to step 2 the previous button is indeed visible.

This is another attempt in my code (I use the WizardStep activate and
deactivate events as I find them more reliable than the regular wizard
navigate events). This is very interesting....

Here I am disabling the datalist in the SideBarContaine r and it works
immediately and just fine. the very code below it which I got from you also
appears to work when I step through it in debug mode i.e the PreviousButton
is found and it is set to non visible. But on the page when the step 4
shows the previous button is alive and well! Only when I hit that
previousbutton do I go back and, guess what, the previous button no longer
appears on step 2. In other words it happens a step late.

protected void WizardStep4_Act ivate(object sender, EventArgs e)
{
Session["curpage"] = "4";
//deactivate navigation capability throughout the wizard - the user
is done.

Control myContainer =
(Control)Wizard 1.FindControl(" SideBarContaine r");
DataList mySideBarList =
(DataList)myCon tainer.FindCont rol("SideBarLis t");
mySideBarList.E nabled = false;

Control ctrl =
Wizard1.FindCon trol("StepNavig ationTemplateCo ntainerID");
Button myPrevButton =
(Button)ctrl.Fi ndControl("Step PreviousButton" );
myPrevButton.Vi sible = false;

Pulling my hair out!
Gary

"Steven Cheng [MSFT]" <st*****@online .microsoft.comw rote in message
news:pe******** ********@TK2MSF TNGHUB02.phx.gb l...
Hi Gary,

As for the Wizard control, those different Container (such as Navigation
Panel , SideBar Panel...) , they're separate from each other (under the
Wizard control's Sub control colleciton). Therefore, if you want to lookup
any child control within any of them, you need to get reference to the
certain container first. Generally, a useful means to determine the
control structure/hierarchy is turn on page's output trace (see the below
directive):

=============== ======
<%@ Page Language="C#" AutoEventWireup ="true" CodeFile="CSWiz ard.aspx.cs"
Inherits="CSWiz ard"
Trace="true" %>

=============== ===

And based on my test, the "Navigation container"'s control ID is
"StepNavigation TemplateContain erID". You can use it to get the Navigation
container control first, and call FindControl on it to get the
"MovePreviousBu tton" and "MoveNextButton ".

here is a simple test page I've used. Also, "ActiveStepChan ged" event is
not the proper event to lookup control collection (because at that time,
the new Step's control collection hasn't been populatd yet). I suggest you
use "Load" event.

=============as px template ======
<asp:Wizard ID="Wizard1" runat="server" ActiveStepIndex ="1"
onactivestepcha nged="Wizard1_A ctiveStepChange d"
onload="Wizard1 _Load">
<WizardSteps>
<asp:WizardSt ep runat="server" title="Step 1">
<asp:Label ID="Label1" runat="server"
Text="Label1"></asp:Label>
<br />
<asp:Button ID="Button1" runat="server" Text="Button1"
/>
</asp:WizardStep>
<asp:WizardSt ep runat="server" title="Step 2">
<asp:Label ID="Label2" runat="server"
Text="Label2"></asp:Label>
<br />
<asp:Button ID="Button2" runat="server" Text="Button2"
/>
</asp:WizardStep>
<asp:WizardSt ep runat="server" Title="Step 3">
<asp:Label ID="Label3" runat="server"
Text="Label3"></asp:Label>
<br />
<asp:Button ID="Button3" runat="server" Text="Button3"
/>
</asp:WizardStep>
<asp:WizardSt ep runat="server" Title="Step 4">
<asp:Label ID="Label4" runat="server"
Text="Label4"></asp:Label>
<br />
<asp:Button ID="Button4" runat="server" Text="Button4"
/>
</asp:WizardStep>
</WizardSteps>
<StepNavigation Template >
<asp:Button ID="StepPreviou sButton" runat="server"
CausesValidatio n="False"
CommandName="Mo vePrevious" Text="Previous" />
<asp:Button ID="StepNextBut ton" runat="server"
CommandName="Mo veNext"
Text="Next" />
</StepNavigationT emplate>
</asp:Wizard>

==========code behind=========
protected void Wizard1_Load(ob ject sender, EventArgs e)
{
Control ctrl =
Wizard1.FindCon trol("StepNavig ationTemplateCo ntainerID");

Response.Write( "<br/>Wizard1_Load:" );
Button btn1 = ctrl.FindContro l("StepPrevious Button") as Button;
Button btn2 = ctrl.FindContro l("StepNextButt on") as Button;

Response.Write( "<br/>" + btn1 + " | " + btn2);
}
}
=============== =======

Hope this helps.

Sincerely,

Steven Cheng

Microsoft MSDN Online Support Lead
Delighting our customers is our #1 priority. We welcome your comments and
suggestions about how we can improve the support we provide to you. Please
feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
ms****@microsof t.com.

=============== =============== =============== =====
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/subscripti...ult.aspx#notif
ications.

Note: The MSDN Managed Newsgroup support offering is for non-urgent issues
where an initial response from the community or a Microsoft Support
Engineer within 1 business day is acceptable. Please note that each follow
up response may take approximately 2 business days as the support
professional working with you may need further investigation to reach the
most efficient resolution. The offering is not appropriate for situations
that require urgent, real-time or phone-based interactions or complex
project analysis and dump analysis issues. Issues of this nature are best
handled working with a dedicated Microsoft Support Engineer by contacting
Microsoft Customer Support Services (CSS) at
http://msdn.microsoft.com/subscripti...t/default.aspx.
=============== =============== =============== =====
This posting is provided "AS IS" with no warranties, and confers no
rights.

--------------------
>>From: "GaryDean" <gd**********@n ewsgroup.nospam >
Subject: Accessing Wizard Next/Prev buttons
Date: Thu, 26 Jun 2008 10:59:43 -0600
>>
I have a Wizard page and need to affect the next and previous buttons from
my code-behind. I've googled around and found two solutions, and neither
appear to work.

I can access the SideBarList steps successfully with the following code...

Control myContainer =
(Control)Wiza rd1.FindControl ("SideBarContai ner");
DataList mySideBarList =
(DataList)myC ontainer.FindCo ntrol("SideBarL ist");
mySideBarList.E nabled = false;

Trying to take this approach with the StepNavigationT emplate does not seem
to work. I first converted the step navigation to a template but I cannot
get findcontrol to find anything in "StepNavigation Container" or
"StepNavigati onTemplate" or anything else I can think of.

I have also tried putting .hidden {display:none} in my .css file and ....

protected void Wizard1_ActiveS tepChanged(obje ct sender, EventArgs e)
{
if (Wizard1.Active StepIndex == 3)
{
Wizard1.StepPre viousButtonStyl e.CssClass = "hidden";
Wizard1.StepNex tButtonStyle.Cs sClass = "hidden";
}
}

This has the effect of not working when goint to step 3 as the Prev/finish
still show. However if the prev button is hit, step 2 shows with the next
button not visible.

Is there a solution to this problem? Is there a reliable way to access
these buttons?

Thanks,
Gary

Jun 29 '08 #2
Thanks for your reply Gary,

Don't worry, I think there might be some status which hasn't been
maintained correctly here. To better test the behavior, would you send me a
simplified page which use a wizard control to demonstrate what you want to
do? thus, I can test against it on my side. You can reach me at the
following email address:

"stcheng" + @ + "microsoft. com"

Sincerely,

Steven Cheng
Microsoft MSDN Online Support Lead

Delighting our customers is our #1 priority. We welcome your comments and
suggestions about how we can improve the support we provide to you. Please
feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
ms****@microsof t.com.

=============== =============== =============== =====
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/subscripti...ult.aspx#notif
ications.

=============== =============== =============== =====
This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
>From: "GaryDean" <gd**********@n ewsgroup.nospam >
References: <eC************ *@TK2MSFTNGP06. phx.gbl>
<pe************ **@TK2MSFTNGHUB 02.phx.gbl>
>In-Reply-To: <pe************ **@TK2MSFTNGHUB 02.phx.gbl>
Subject: Re: Accessing Wizard Next/Prev buttons
Date: Sat, 28 Jun 2008 18:51:32 -0600
>
Your code in the Wizard1_load event has the effect of not taking effect
until the user hits the previous button that was supposed to be
non-visible.
>then when we go back to step 2 the previous button is indeed visible.

This is another attempt in my code (I use the WizardStep activate and
deactivate events as I find them more reliable than the regular wizard
navigate events). This is very interesting....

Here I am disabling the datalist in the SideBarContaine r and it works
immediately and just fine. the very code below it which I got from you
also
>appears to work when I step through it in debug mode i.e the
PreviousButton
>is found and it is set to non visible. But on the page when the step 4
shows the previous button is alive and well! Only when I hit that
previousbutt on do I go back and, guess what, the previous button no longer
appears on step 2. In other words it happens a step late.

protected void WizardStep4_Act ivate(object sender, EventArgs e)
{
Session["curpage"] = "4";
//deactivate navigation capability throughout the wizard - the
user
>is done.

Control myContainer =
(Control)Wizar d1.FindControl( "SideBarContain er");
DataList mySideBarList =
(DataList)myCo ntainer.FindCon trol("SideBarLi st");
mySideBarList.E nabled = false;

Control ctrl =
Wizard1.FindCo ntrol("StepNavi gationTemplateC ontainerID");
Button myPrevButton =
(Button)ctrl.F indControl("Ste pPreviousButton ");
myPrevButton.Vi sible = false;

Pulling my hair out!
Gary

"Steven Cheng [MSFT]" <st*****@online .microsoft.comw rote in message
news:pe******* *********@TK2MS FTNGHUB02.phx.g bl...
>Hi Gary,

As for the Wizard control, those different Container (such as Navigation
Panel , SideBar Panel...) , they're separate from each other (under the
Wizard control's Sub control colleciton). Therefore, if you want to
lookup
>any child control within any of them, you need to get reference to the
certain container first. Generally, a useful means to determine the
control structure/hierarchy is turn on page's output trace (see the below
directive):

============== =======
<%@ Page Language="C#" AutoEventWireup ="true" CodeFile="CSWiz ard.aspx.cs"
Inherits="CSWi zard"
Trace="true" %>

============== ====

And based on my test, the "Navigation container"'s control ID is
"StepNavigatio nTemplateContai nerID". You can use it to get the
Navigation
>container control first, and call FindControl on it to get the
"MovePreviousB utton" and "MoveNextButton ".

here is a simple test page I've used. Also, "ActiveStepChan ged" event is
not the proper event to lookup control collection (because at that time,
the new Step's control collection hasn't been populatd yet). I suggest
you
>use "Load" event.

=============a spx template ======
<asp:Wizard ID="Wizard1" runat="server" ActiveStepIndex ="1"
onactivestepcha nged="Wizard1_A ctiveStepChange d"
onload="Wizard 1_Load">
<WizardSteps>
<asp:WizardSt ep runat="server" title="Step 1">
<asp:Label ID="Label1" runat="server"
Text="Label1"> </asp:Label>
<br />
<asp:Button ID="Button1" runat="server" Text="Button1"
/>
</asp:WizardStep>
<asp:WizardSt ep runat="server" title="Step 2">
<asp:Label ID="Label2" runat="server"
Text="Label2"> </asp:Label>
<br />
<asp:Button ID="Button2" runat="server" Text="Button2"
/>
</asp:WizardStep>
<asp:WizardSt ep runat="server" Title="Step 3">
<asp:Label ID="Label3" runat="server"
Text="Label3"> </asp:Label>
<br />
<asp:Button ID="Button3" runat="server" Text="Button3"
/>
</asp:WizardStep>
<asp:WizardSt ep runat="server" Title="Step 4">
<asp:Label ID="Label4" runat="server"
Text="Label4"> </asp:Label>
<br />
<asp:Button ID="Button4" runat="server" Text="Button4"
/>
</asp:WizardStep>
</WizardSteps>
<StepNavigation Template >
<asp:Button ID="StepPreviou sButton" runat="server"
CausesValidati on="False"
CommandName="Mo vePrevious" Text="Previous" />
<asp:Button ID="StepNextBut ton" runat="server"
CommandName="M oveNext"
Text="Next" />
</StepNavigationT emplate>
</asp:Wizard>

==========co de behind=========
protected void Wizard1_Load(ob ject sender, EventArgs e)
{
Control ctrl =
Wizard1.FindCo ntrol("StepNavi gationTemplateC ontainerID");

Response.Write( "<br/>Wizard1_Load:" );
Button btn1 = ctrl.FindContro l("StepPrevious Button") as Button;
Button btn2 = ctrl.FindContro l("StepNextButt on") as Button;

Response.Write( "<br/>" + btn1 + " | " + btn2);
}
}
============== ========

Hope this helps.

Sincerely,

Steven Cheng

Microsoft MSDN Online Support Lead
Delighting our customers is our #1 priority. We welcome your comments and
suggestions about how we can improve the support we provide to you.
Please
>feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
ms****@microsof t.com.

============== =============== =============== ======
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/subscripti...ult.aspx#notif
>ications.

Note: The MSDN Managed Newsgroup support offering is for non-urgent
issues
>where an initial response from the community or a Microsoft Support
Engineer within 1 business day is acceptable. Please note that each
follow
>up response may take approximately 2 business days as the support
professional working with you may need further investigation to reach the
most efficient resolution. The offering is not appropriate for situations
that require urgent, real-time or phone-based interactions or complex
project analysis and dump analysis issues. Issues of this nature are best
handled working with a dedicated Microsoft Support Engineer by contacting
Microsoft Customer Support Services (CSS) at
http://msdn.microsoft.com/subscripti...t/default.aspx.
============== =============== =============== ======
This posting is provided "AS IS" with no warranties, and confers no
rights.

--------------------
>>>From: "GaryDean" <gd**********@n ewsgroup.nospam >
Subject: Accessing Wizard Next/Prev buttons
Date: Thu, 26 Jun 2008 10:59:43 -0600
>>>
I have a Wizard page and need to affect the next and previous buttons
from
>>>my code-behind. I've googled around and found two solutions, and neither
appear to work.

I can access the SideBarList steps successfully with the following
code...
>>>
Control myContainer =
(Control)Wiz ard1.FindContro l("SideBarConta iner");
DataList mySideBarList =
(DataList)my Container.FindC ontrol("SideBar List");
mySideBarList.E nabled = false;

Trying to take this approach with the StepNavigationT emplate does not
seem
>>>to work. I first converted the step navigation to a template but I
cannot
>>>get findcontrol to find anything in "StepNavigation Container" or
"StepNavigat ionTemplate" or anything else I can think of.

I have also tried putting .hidden {display:none} in my .css file and ....

protected void Wizard1_ActiveS tepChanged(obje ct sender, EventArgs e)
{
if (Wizard1.Active StepIndex == 3)
{
Wizard1.StepPre viousButtonStyl e.CssClass = "hidden";
Wizard1.StepNex tButtonStyle.Cs sClass = "hidden";
}
}

This has the effect of not working when goint to step 3 as the
Prev/finish
>>>still show. However if the prev button is hit, step 2 shows with the
next
>>>button not visible.

Is there a solution to this problem? Is there a reliable way to access
these buttons?

Thanks,
Gary


Jul 1 '08 #3
Yes but it might be a few days.
Thanks.
"Steven Cheng [MSFT]" <st*****@online .microsoft.comw rote in message
news:hD******** ******@TK2MSFTN GHUB02.phx.gbl. ..
Thanks for your reply Gary,

Don't worry, I think there might be some status which hasn't been
maintained correctly here. To better test the behavior, would you send me
a
simplified page which use a wizard control to demonstrate what you want to
do? thus, I can test against it on my side. You can reach me at the
following email address:

"stcheng" + @ + "microsoft. com"

Sincerely,

Steven Cheng
Microsoft MSDN Online Support Lead

Delighting our customers is our #1 priority. We welcome your comments and
suggestions about how we can improve the support we provide to you. Please
feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
ms****@microsof t.com.

=============== =============== =============== =====
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/subscripti...ult.aspx#notif
ications.

=============== =============== =============== =====
This posting is provided "AS IS" with no warranties, and confers no
rights.

--------------------
>>From: "GaryDean" <gd**********@n ewsgroup.nospam >
References: <eC************ *@TK2MSFTNGP06. phx.gbl>
<pe************ **@TK2MSFTNGHUB 02.phx.gbl>
>>In-Reply-To: <pe************ **@TK2MSFTNGHUB 02.phx.gbl>
Subject: Re: Accessing Wizard Next/Prev buttons
Date: Sat, 28 Jun 2008 18:51:32 -0600
>>
Your code in the Wizard1_load event has the effect of not taking effect
until the user hits the previous button that was supposed to be
non-visible.
>>then when we go back to step 2 the previous button is indeed visible.

This is another attempt in my code (I use the WizardStep activate and
deactivate events as I find them more reliable than the regular wizard
navigate events). This is very interesting....

Here I am disabling the datalist in the SideBarContaine r and it works
immediately and just fine. the very code below it which I got from you
also
>>appears to work when I step through it in debug mode i.e the
PreviousButton
>>is found and it is set to non visible. But on the page when the step 4
shows the previous button is alive and well! Only when I hit that
previousbutto n do I go back and, guess what, the previous button no longer
appears on step 2. In other words it happens a step late.

protected void WizardStep4_Act ivate(object sender, EventArgs e)
{
Session["curpage"] = "4";
//deactivate navigation capability throughout the wizard - the
user
>>is done.

Control myContainer =
(Control)Wiza rd1.FindControl ("SideBarContai ner");
DataList mySideBarList =
(DataList)myC ontainer.FindCo ntrol("SideBarL ist");
mySideBarList.E nabled = false;

Control ctrl =
Wizard1.FindC ontrol("StepNav igationTemplate ContainerID");
Button myPrevButton =
(Button)ctrl. FindControl("St epPreviousButto n");
myPrevButton.Vi sible = false;

Pulling my hair out!
Gary

"Steven Cheng [MSFT]" <st*****@online .microsoft.comw rote in message
news:pe****** **********@TK2M SFTNGHUB02.phx. gbl...
>>Hi Gary,

As for the Wizard control, those different Container (such as Navigation
Panel , SideBar Panel...) , they're separate from each other (under the
Wizard control's Sub control colleciton). Therefore, if you want to
lookup
>>any child control within any of them, you need to get reference to the
certain container first. Generally, a useful means to determine the
control structure/hierarchy is turn on page's output trace (see the
below
directive):

============= ========
<%@ Page Language="C#" AutoEventWireup ="true"
CodeFile="CSW izard.aspx.cs"
Inherits="CSW izard"
Trace="true " %>

============= =====

And based on my test, the "Navigation container"'s control ID is
"StepNavigati onTemplateConta inerID". You can use it to get the
Navigation
>>container control first, and call FindControl on it to get the
"MovePrevious Button" and "MoveNextButton ".

here is a simple test page I've used. Also, "ActiveStepChan ged" event
is
not the proper event to lookup control collection (because at that time,
the new Step's control collection hasn't been populatd yet). I suggest
you
>>use "Load" event.

============= aspx template ======
<asp:Wizard ID="Wizard1" runat="server" ActiveStepIndex ="1"
onactivestepcha nged="Wizard1_A ctiveStepChange d"
onload="Wizar d1_Load">
<WizardSteps>
<asp:WizardSt ep runat="server" title="Step 1">
<asp:Label ID="Label1" runat="server"
Text="Label1" ></asp:Label>
<br />
<asp:Button ID="Button1" runat="server"
Text="Button1 "
/>
</asp:WizardStep>
<asp:WizardSt ep runat="server" title="Step 2">
<asp:Label ID="Label2" runat="server"
Text="Label2" ></asp:Label>
<br />
<asp:Button ID="Button2" runat="server"
Text="Button2 "
/>
</asp:WizardStep>
<asp:WizardSt ep runat="server" Title="Step 3">
<asp:Label ID="Label3" runat="server"
Text="Label3" ></asp:Label>
<br />
<asp:Button ID="Button3" runat="server"
Text="Button3 "
/>
</asp:WizardStep>
<asp:WizardSt ep runat="server" Title="Step 4">
<asp:Label ID="Label4" runat="server"
Text="Label4" ></asp:Label>
<br />
<asp:Button ID="Button4" runat="server"
Text="Button4 "
/>
</asp:WizardStep>
</WizardSteps>
<StepNavigation Template >
<asp:Button ID="StepPreviou sButton" runat="server"
CausesValidat ion="False"
CommandName="Mo vePrevious" Text="Previous" />
<asp:Button ID="StepNextBut ton" runat="server"
CommandName=" MoveNext"
Text="Next" />
</StepNavigationT emplate>
</asp:Wizard>

==========cod e behind=========
protected void Wizard1_Load(ob ject sender, EventArgs e)
{
Control ctrl =
Wizard1.FindC ontrol("StepNav igationTemplate ContainerID");

Response.Write( "<br/>Wizard1_Load:" );
Button btn1 = ctrl.FindContro l("StepPrevious Button") as Button;
Button btn2 = ctrl.FindContro l("StepNextButt on") as Button;

Response.Write( "<br/>" + btn1 + " | " + btn2);
}
}
============= =========

Hope this helps.

Sincerely,

Steven Cheng

Microsoft MSDN Online Support Lead
Delighting our customers is our #1 priority. We welcome your comments
and
suggestions about how we can improve the support we provide to you.
Please
>>feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
ms****@microsof t.com.

============= =============== =============== =======
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/subscripti...ult.aspx#notif
>>ications.

Note: The MSDN Managed Newsgroup support offering is for non-urgent
issues
>>where an initial response from the community or a Microsoft Support
Engineer within 1 business day is acceptable. Please note that each
follow
>>up response may take approximately 2 business days as the support
professiona l working with you may need further investigation to reach
the
most efficient resolution. The offering is not appropriate for
situations
that require urgent, real-time or phone-based interactions or complex
project analysis and dump analysis issues. Issues of this nature are
best
handled working with a dedicated Microsoft Support Engineer by
contacting
Microsoft Customer Support Services (CSS) at
http://msdn.microsoft.com/subscripti...t/default.aspx.
============= =============== =============== =======
This posting is provided "AS IS" with no warranties, and confers no
rights.

--------------------
From: "GaryDean" <gd**********@n ewsgroup.nospam >
Subject: Accessing Wizard Next/Prev buttons
Date: Thu, 26 Jun 2008 10:59:43 -0600
I have a Wizard page and need to affect the next and previous buttons
from
>>>>my code-behind. I've googled around and found two solutions, and
neither
appear to work.

I can access the SideBarList steps successfully with the following
code...
>>>>
Control myContainer =
(Control)Wi zard1.FindContr ol("SideBarCont ainer");
DataList mySideBarList =
(DataList)m yContainer.Find Control("SideBa rList");
mySideBarList.E nabled = false;

Trying to take this approach with the StepNavigationT emplate does not
seem
>>>>to work. I first converted the step navigation to a template but I
cannot
>>>>get findcontrol to find anything in "StepNavigation Container" or
"StepNaviga tionTemplate" or anything else I can think of.

I have also tried putting .hidden {display:none} in my .css file and
....

protected void Wizard1_ActiveS tepChanged(obje ct sender, EventArgs e)
{
if (Wizard1.Active StepIndex == 3)
{
Wizard1.StepPre viousButtonStyl e.CssClass = "hidden";
Wizard1.StepNex tButtonStyle.Cs sClass = "hidden";
}
}

This has the effect of not working when goint to step 3 as the
Prev/finish
>>>>still show. However if the prev button is hit, step 2 shows with the
next
>>>>button not visible.

Is there a solution to this problem? Is there a reliable way to access
these buttons?

Thanks,
Gary

Jul 1 '08 #4
Thanks for your reply Gary,

No problem. Please feel free to let me know at your convenience.

Sincerely,

Steven Cheng

Microsoft MSDN Online Support Lead
Delighting our customers is our #1 priority. We welcome your comments and
suggestions about how we can improve the support we provide to you. Please
feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
ms****@microsof t.com.

=============== =============== =============== =====
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/subscripti...ult.aspx#notif
ications.
=============== =============== =============== =====
This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
>From: "GaryDean" <gd**********@n ewsgroup.nospam >
References: <eC************ *@TK2MSFTNGP06. phx.gbl>
<pe************ **@TK2MSFTNGHUB 02.phx.gbl>
<#F************ **@TK2MSFTNGP03 .phx.gbl>
<hD************ **@TK2MSFTNGHUB 02.phx.gbl>
>In-Reply-To: <hD************ **@TK2MSFTNGHUB 02.phx.gbl>
Subject: Re: Accessing Wizard Next/Prev buttons
Date: Tue, 1 Jul 2008 17:24:35 -0600
>
Yes but it might be a few days.
Thanks.
"Steven Cheng [MSFT]" <st*****@online .microsoft.comw rote in message
news:hD******* *******@TK2MSFT NGHUB02.phx.gbl ...
>Thanks for your reply Gary,

Don't worry, I think there might be some status which hasn't been
maintained correctly here. To better test the behavior, would you send
me
>a
simplified page which use a wizard control to demonstrate what you want
to
>do? thus, I can test against it on my side. You can reach me at the
following email address:

"stcheng" + @ + "microsoft. com"

Sincerely,

Steven Cheng
Microsoft MSDN Online Support Lead

Delighting our customers is our #1 priority. We welcome your comments and
suggestions about how we can improve the support we provide to you.
Please
>feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
ms****@microsof t.com.

============== =============== =============== ======
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/subscripti...ult.aspx#notif
>ications.

============== =============== =============== ======
This posting is provided "AS IS" with no warranties, and confers no
rights.

--------------------
>>>From: "GaryDean" <gd**********@n ewsgroup.nospam >
References : <eC************ *@TK2MSFTNGP06. phx.gbl>
<pe*********** ***@TK2MSFTNGHU B02.phx.gbl>
>>>In-Reply-To: <pe************ **@TK2MSFTNGHUB 02.phx.gbl>
Subject: Re: Accessing Wizard Next/Prev buttons
Date: Sat, 28 Jun 2008 18:51:32 -0600
>>>
Your code in the Wizard1_load event has the effect of not taking effect
until the user hits the previous button that was supposed to be
non-visible.
>>>then when we go back to step 2 the previous button is indeed visible.

This is another attempt in my code (I use the WizardStep activate and
deactivate events as I find them more reliable than the regular wizard
navigate events). This is very interesting....

Here I am disabling the datalist in the SideBarContaine r and it works
immediatel y and just fine. the very code below it which I got from you
also
>>>appears to work when I step through it in debug mode i.e the
PreviousButt on
>>>is found and it is set to non visible. But on the page when the step 4
shows the previous button is alive and well! Only when I hit that
previousbutt on do I go back and, guess what, the previous button no
longer
>>>appears on step 2. In other words it happens a step late.

protected void WizardStep4_Act ivate(object sender, EventArgs e)
{
Session["curpage"] = "4";
//deactivate navigation capability throughout the wizard - the
user
>>>is done.

Control myContainer =
(Control)Wiz ard1.FindContro l("SideBarConta iner");
DataList mySideBarList =
(DataList)my Container.FindC ontrol("SideBar List");
mySideBarList.E nabled = false;

Control ctrl =
Wizard1.Find Control("StepNa vigationTemplat eContainerID");
Button myPrevButton =
(Button)ctrl .FindControl("S tepPreviousButt on");
myPrevButton.Vi sible = false;

Pulling my hair out!
Gary

"Steven Cheng [MSFT]" <st*****@online .microsoft.comw rote in message
news:pe***** ***********@TK2 MSFTNGHUB02.phx .gbl...
Hi Gary,

As for the Wizard control, those different Container (such as
Navigation
>>>Panel , SideBar Panel...) , they're separate from each other (under the
Wizard control's Sub control colleciton). Therefore, if you want to
lookup
>>>any child control within any of them, you need to get reference to the
certain container first. Generally, a useful means to determine the
control structure/hierarchy is turn on page's output trace (see the
below
directive) :

============ =========
<%@ Page Language="C#" AutoEventWireup ="true"
CodeFile="CS Wizard.aspx.cs"
Inherits="CS Wizard"
Trace="tru e" %>

============ ======

And based on my test, the "Navigation container"'s control ID is
"StepNavigat ionTemplateCont ainerID". You can use it to get the
Navigation
>>>container control first, and call FindControl on it to get the
"MovePreviou sButton" and "MoveNextButton ".

here is a simple test page I've used. Also, "ActiveStepChan ged" event
is
not the proper event to lookup control collection (because at that
time,
>>>the new Step's control collection hasn't been populatd yet). I suggest
you
>>>use "Load" event.

============ =aspx template ======
<asp:Wizard ID="Wizard1" runat="server" ActiveStepIndex ="1"
onactivestepcha nged="Wizard1_A ctiveStepChange d"
onload="Wiza rd1_Load">
<WizardSteps>
<asp:WizardSt ep runat="server" title="Step 1">
<asp:Label ID="Label1" runat="server"
Text="Label1 "></asp:Label>
<br />
<asp:Button ID="Button1" runat="server"
Text="Button 1"
/>
</asp:WizardStep>
<asp:WizardSt ep runat="server" title="Step 2">
<asp:Label ID="Label2" runat="server"
Text="Label2 "></asp:Label>
<br />
<asp:Button ID="Button2" runat="server"
Text="Button 2"
/>
</asp:WizardStep>
<asp:WizardSt ep runat="server" Title="Step 3">
<asp:Label ID="Label3" runat="server"
Text="Label3 "></asp:Label>
<br />
<asp:Button ID="Button3" runat="server"
Text="Button 3"
/>
</asp:WizardStep>
<asp:WizardSt ep runat="server" Title="Step 4">
<asp:Label ID="Label4" runat="server"
Text="Label4 "></asp:Label>
<br />
<asp:Button ID="Button4" runat="server"
Text="Button 4"
/>
</asp:WizardStep>
</WizardSteps>
<StepNavigation Template >
<asp:Button ID="StepPreviou sButton" runat="server"
CausesValida tion="False"
CommandName="Mo vePrevious" Text="Previous" />
<asp:Button ID="StepNextBut ton" runat="server"
CommandName= "MoveNext"
Text="Next" />
</StepNavigationT emplate>
</asp:Wizard>

==========co de behind=========
protected void Wizard1_Load(ob ject sender, EventArgs e)
{
Control ctrl =
Wizard1.Find Control("StepNa vigationTemplat eContainerID");

Response.Write( "<br/>Wizard1_Load:" );
Button btn1 = ctrl.FindContro l("StepPrevious Button") as Button;
Button btn2 = ctrl.FindContro l("StepNextButt on") as Button;

Response.Write( "<br/>" + btn1 + " | " + btn2);
}
}
============ ==========

Hope this helps.

Sincerely,

Steven Cheng

Microsoft MSDN Online Support Lead
Delighting our customers is our #1 priority. We welcome your comments
and
suggestion s about how we can improve the support we provide to you.
Please
>>>feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
ms****@microsof t.com.

============ =============== =============== ========
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/subscripti...ult.aspx#notif
>>>ications.

Note: The MSDN Managed Newsgroup support offering is for non-urgent
issues
>>>where an initial response from the community or a Microsoft Support
Engineer within 1 business day is acceptable. Please note that each
follow
>>>up response may take approximately 2 business days as the support
profession al working with you may need further investigation to reach
the
most efficient resolution. The offering is not appropriate for
situations
that require urgent, real-time or phone-based interactions or complex
project analysis and dump analysis issues. Issues of this nature are
best
handled working with a dedicated Microsoft Support Engineer by
contacting
Microsoft Customer Support Services (CSS) at
http://msdn.microsoft.com/subscripti...t/default.aspx.
============ =============== =============== ========
This posting is provided "AS IS" with no warranties, and confers no
rights.

--------------------
>From: "GaryDean" <gd**********@n ewsgroup.nospam >
>Subject: Accessing Wizard Next/Prev buttons
>Date: Thu, 26 Jun 2008 10:59:43 -0600

>
>I have a Wizard page and need to affect the next and previous buttons
from
>>>>>my code-behind. I've googled around and found two solutions, and
>neither
>appear to work.
>
>I can access the SideBarList steps successfully with the following
code...
>>>>>
Control myContainer =
>(Control)W izard1.FindCont rol("SideBarCon tainer");
DataList mySideBarList =
>(DataList) myContainer.Fin dControl("SideB arList");
mySideBarList.E nabled = false;
>
>Trying to take this approach with the StepNavigationT emplate does not
seem
>>>>>to work. I first converted the step navigation to a template but I
cannot
>>>>>get findcontrol to find anything in "StepNavigation Container" or
>"StepNavig ationTemplate" or anything else I can think of.
>
>I have also tried putting .hidden {display:none} in my .css file and
>....
>
protected void Wizard1_ActiveS tepChanged(obje ct sender, EventArgs
e)
>>>> {
if (Wizard1.Active StepIndex == 3)
{
Wizard1.StepPre viousButtonStyl e.CssClass = "hidden";
Wizard1.StepNex tButtonStyle.Cs sClass = "hidden";
}
}
>
>This has the effect of not working when goint to step 3 as the
Prev/finish
>>>>>still show. However if the prev button is hit, step 2 shows with the
next
>>>>>button not visible.
>
>Is there a solution to this problem? Is there a reliable way to access
>these buttons?
>
>Thanks,
>Gary
>
>

Jul 2 '08 #5

Hi Gary,

I have performed some test against the sample page you provided. Here are
some of my test results according to your previous reply in the newsgroup
thread:

1. At the beginning, both next/previous buttons and side bar links can help
navigate between steps
2. After I reach the final step(step4), sidebar is disabled, and I can only
move to previous step via "previous" button.
3. However, when I move to step2, the previous button still exists(per your
description in newsgroup, this button disappear in step2?). And only if I
reach step1 will the "previous" button disappear.

So far, what I'm not clear is why don't you also disable "Previous button"
when reach step4, but only disable the sidebar? Also, if there is any
other problems here, please feel free to let me know.

Sincerely,

Steven Cheng

Microsoft MSDN Online Support Lead
Delighting our customers is our #1 priority. We welcome your comments and
suggestions about how we can improve the support we provide to you. Please
feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
ms****@microsof t.com.

=============== =============== =============== =====
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/subscripti...ult.aspx#notif
ications.

Jul 8 '08 #6
Hi Gary,

After some further research, I've figured out the problem.

Actually, we've made a mistake when locating the "PreviousButton " on the
last step(the finish step). We originally use the following code:

============
Control ctrl =
Wizard1.FindCon trol("StepNavig ationTemplateCo ntainerID");
Button myPrevButton =
(Button)ctrl.Fi ndControl("Step PreviousButton" );
myPrevButton.Vi sible = false;

============

this is ok for intermediate step, however, for the finish step/end step,
you need to search for the "previousButton " in a different Container called
"FinishNavigati onTemplateConta inerID", also the Button ID is different.
Here is the code I've used to make the "previous button" in last step
disabled. The code contains two part:

1. mark a flag(in session) indicate that we've reach the end

2. in "PreRender" event of the wizard, we check the flag and determine
whether to disable the button
=============== ==========
protected void WizardStep4_Act ivate(object sender, EventArgs e)
{
............... .......

Session["finish"] = true;

}

=============== ===========

protected void Wizard1_PreRend er(object sender, EventArgs e)
{
if (Session["finish"] != null)
{
Control ctrl =
Wizard1.FindCon trol("FinishNav igationTemplate ContainerID");
Button myPrevButton =
(Button)ctrl.Fi ndControl("Fini shPreviousButto n");
myPrevButton.En abled = false;
}

}
=============== ==========

Hope this helps. I'll also send you the modified project via email.

Sincerely,

Steven Cheng

Microsoft MSDN Online Support Lead
Delighting our customers is our #1 priority. We welcome your comments and
suggestions about how we can improve the support we provide to you. Please
feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
ms****@microsof t.com.

=============== =============== =============== =====
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/subscripti...ult.aspx#notif
ications.

=============== =============== =============== =====
This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
>X-Tomcat-ID: 8069796
Date: Tue, 08 Jul 2008 09:33:48 GMT
Subject: Re: Accessing Wizard Next/Prev buttons
>
Hi Gary,

I have performed some test against the sample page you provided. Here are
some of my test results according to your previous reply in the newsgroup
thread:

1. At the beginning, both next/previous buttons and side bar links can
help
>navigate between steps
2. After I reach the final step(step4), sidebar is disabled, and I can
only
>move to previous step via "previous" button.
3. However, when I move to step2, the previous button still exists(per
your
>description in newsgroup, this button disappear in step2?). And only if I
reach step1 will the "previous" button disappear.

So far, what I'm not clear is why don't you also disable "Previous button"
when reach step4, but only disable the sidebar? Also, if there is any
other problems here, please feel free to let me know.

Sincerely,

Steven Cheng

Microsoft MSDN Online Support Lead
Delighting our customers is our #1 priority. We welcome your comments and
suggestions about how we can improve the support we provide to you. Please
feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
ms****@microso ft.com.

============== =============== =============== ======
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/subscripti...ault.aspx#noti
f
>ications.

Jul 10 '08 #7
Steven:
Wow. that did it! I don't think I would have ever figured this out.
Thanks for your help.
Gary

"Steven Cheng [MSFT]" <st*****@online .microsoft.comw rote in message
news:4y******** ******@TK2MSFTN GHUB02.phx.gbl. ..
Hi Gary,

After some further research, I've figured out the problem.

Actually, we've made a mistake when locating the "PreviousButton " on the
last step(the finish step). We originally use the following code:

============
Control ctrl =
Wizard1.FindCon trol("StepNavig ationTemplateCo ntainerID");
Button myPrevButton =
(Button)ctrl.Fi ndControl("Step PreviousButton" );
myPrevButton.Vi sible = false;

============

this is ok for intermediate step, however, for the finish step/end step,
you need to search for the "previousButton " in a different Container
called
"FinishNavigati onTemplateConta inerID", also the Button ID is different.
Here is the code I've used to make the "previous button" in last step
disabled. The code contains two part:

1. mark a flag(in session) indicate that we've reach the end

2. in "PreRender" event of the wizard, we check the flag and determine
whether to disable the button
=============== ==========
protected void WizardStep4_Act ivate(object sender, EventArgs e)
{
............... .......

Session["finish"] = true;

}

=============== ===========

protected void Wizard1_PreRend er(object sender, EventArgs e)
{
if (Session["finish"] != null)
{
Control ctrl =
Wizard1.FindCon trol("FinishNav igationTemplate ContainerID");
Button myPrevButton =
(Button)ctrl.Fi ndControl("Fini shPreviousButto n");
myPrevButton.En abled = false;
}

}
=============== ==========

Hope this helps. I'll also send you the modified project via email.

Sincerely,

Steven Cheng

Microsoft MSDN Online Support Lead
Delighting our customers is our #1 priority. We welcome your comments and
suggestions about how we can improve the support we provide to you. Please
feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
ms****@microsof t.com.

=============== =============== =============== =====
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/subscripti...ult.aspx#notif
ications.

=============== =============== =============== =====
This posting is provided "AS IS" with no warranties, and confers no
rights.

--------------------
>>X-Tomcat-ID: 8069796
Date: Tue, 08 Jul 2008 09:33:48 GMT
Subject: Re: Accessing Wizard Next/Prev buttons
>>
Hi Gary,

I have performed some test against the sample page you provided. Here are
some of my test results according to your previous reply in the newsgroup
thread:

1. At the beginning, both next/previous buttons and side bar links can
help
>>navigate between steps
2. After I reach the final step(step4), sidebar is disabled, and I can
only
>>move to previous step via "previous" button.
3. However, when I move to step2, the previous button still exists(per
your
>>description in newsgroup, this button disappear in step2?). And only if I
reach step1 will the "previous" button disappear.

So far, what I'm not clear is why don't you also disable "Previous button"
when reach step4, but only disable the sidebar? Also, if there is any
other problems here, please feel free to let me know.

Sincerely,

Steven Cheng

Microsoft MSDN Online Support Lead
Delighting our customers is our #1 priority. We welcome your comments and
suggestions about how we can improve the support we provide to you. Please
feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
ms****@micros oft.com.

============= =============== =============== =======
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/subscripti...ault.aspx#noti
f
>>ications.

Jul 11 '08 #8
Hi Gary,

I'm also very glad that it helps you resolve the problem.

If you have any other questions later, always feel free to post in the
newsgroup.

Have a nice day!

Sincerely,

Steven Cheng
Microsoft MSDN Online Support Lead
Delighting our customers is our #1 priority. We welcome your comments and
suggestions about how we can improve the support we provide to you. Please
feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
ms****@microsof t.com.

=============== =============== =============== =====
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/subscripti...ult.aspx#notif
ications.

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
>From: "GaryDean" <gd**********@n ewsgroup.nospam >
Subject: Re: Accessing Wizard Next/Prev buttons
Date: Thu, 10 Jul 2008 18:26:11 -0600
>
Steven:
Wow. that did it! I don't think I would have ever figured this out.
Thanks for your help.
Gary

"Steven Cheng [MSFT]" <st*****@online .microsoft.comw rote in message
news:4y******* *******@TK2MSFT NGHUB02.phx.gbl ...
>Hi Gary,

After some further research, I've figured out the problem.

Actually, we've made a mistake when locating the "PreviousButton " on the
last step(the finish step). We originally use the following code:

============
Control ctrl =
Wizard1.FindCo ntrol("StepNavi gationTemplateC ontainerID");
Button myPrevButton =
(Button)ctrl.F indControl("Ste pPreviousButton ");
myPrevButton.Vi sible = false;

============

this is ok for intermediate step, however, for the finish step/end step,
you need to search for the "previousButton " in a different Container
called
"FinishNavigat ionTemplateCont ainerID", also the Button ID is different.
Here is the code I've used to make the "previous button" in last step
disabled. The code contains two part:

1. mark a flag(in session) indicate that we've reach the end

2. in "PreRender" event of the wizard, we check the flag and determine
whether to disable the button
============== ===========
protected void WizardStep4_Act ivate(object sender, EventArgs e)
{
............... .......

Session["finish"] = true;

}

============== ============

protected void Wizard1_PreRend er(object sender, EventArgs e)
{
if (Session["finish"] != null)
{
Control ctrl =
Wizard1.FindCo ntrol("FinishNa vigationTemplat eContainerID");
Button myPrevButton =
(Button)ctrl.F indControl("Fin ishPreviousButt on");
myPrevButton.En abled = false;
}

Jul 11 '08 #9

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

6
2243
by: Patrick Coghlan | last post by:
I want to create about 4 forms with the same dimensions and background colours, similar to the forms one has to traverse when installing various software packages. I'm using Visual Studio and C++ (changing to C# soon) and can create separate forms, but I really just want to clone the first one, have the user select different options on each form and navigate between them via the PREV-NEXT-OKAY-CANCEL buttons on the bottom of the form. ...
2
2021
by: RB | last post by:
Hi All, The ASP.NET Datagrid's pagination capability allows me to display either the Next/Prev buttons or the Page numbers to allow the user to navigate through the datagrid page by page as follows: 1) Prev Next, or 2) 1 2 3 ... Is there any easy way on how to display both styles at the same time? For example: Prev 1 2 3 Next
13
14740
by: Joseph Garvin | last post by:
When I first came to Python I did a lot of C style loops like this: for i in range(len(myarray)): print myarray Obviously the more pythonic way is: for i in my array: print i
12
2606
by: raghav | last post by:
Hi I am working on ASP.NET 2.0. I am developing a website using Wizard control. Based on number of steps added, next, previous, finish buttons generate automatically. After running the application, these button work automatically, means we can go to next step, previous step by clicking on corresponding buttons. In my application I have 3 steps. On Next button click of step 1, I want two things to happen. One is inserting data of step 1 in...
5
21817
by: Nick Gilbert | last post by:
Hi, I'm using the asp:Wizard control and on some of the steps, I would only like the user to be able to progess to the next step by clicking an image button. Therefore I would like to be able to hide the Next button on these steps. Is there any way to do this? I know you can convert the navigation to a template, but this is a
6
1705
by: Zim Babwe | last post by:
VS 2005 Windows Application I need to have users enter product information, then contact information, then some other financial information. Currently I have a form that the user enters info on, and at the top, I have a menu that has the three options "Product", "Contact", "Other". When any option is chosen, I display another form. The manager says, it is confusing to the user on how to navigate. Which I think is ridiculous but hey,...
1
3331
by: jenson | last post by:
<?php /* * Created on Apr 13, 2007 * * To change the template for this generated file go to * Window - Preferences - PHPeclipse - PHP - Code Templates */ require_once 'init.php'; $con=mysql_connect("localhost","root",""); $dbc=mysql_select_db(test,$con)or die("Database select error:" . mysql_error($con));
0
276
by: Nick Chan | last post by:
Hi guys i have the following code for wizard Start,Prev,Next will run the methods that i assigned, using handles Protected Sub (ByVal o As Object, ByVal e As WizardNavigationEventArgs) Handles W.NextButtonClick --code End Sub Protected Sub Prev(ByVal o As Object, ByVal e As WizardNavigationEventArgs) Handles W.PreviousButtonClick
2
1540
by: GaryDean | last post by:
In this event I can tell where I'm going via e.NextStepIndex but how can I tell where I am coming from? Do I have to setup Session and track it myself? -- Regards, Gary
0
9923
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
0
10711
jinu1996
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth. The Art of Business Website Design Your website is...
1
10807
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
1
7939
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
0
5774
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
0
5967
by: adsilva | last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
1
4592
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
2
4190
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.
3
3215
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.