473,728 Members | 1,726 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

VS - Operation Timed Out

How could I fix this annoying bug? I have a large solution with 29 projects,
including 28 class libraries and 1 Web Application written in C#. It was
working with IE6 good enough and when I was starting the VS2003 for the
first time after reboot it was loading the whole solution completely. When I
installed IE7 I started facing the following issues - the VS 2003 starts,
then refuses to load the Web Project, complaints about Operation Timed Out,
after clicking OK it loads the rest part of the solution. I close the VS,
start it again and this time it loads the whole solution completely, I just
need to set the Web Project as a Startup project in this solution again.
It's very annoying, but nothing really helps to fix this bug. I realize that
IE7 is slower that IE7 and maybe that's critical for the VS 2003. Well,
where could I correct the settings to make this time out period say twice
longer to let the VS recompile the whole solution while it loads it up? I
tried to correct some settings in Machine.Config file, it actually didn't
help. It has some Limit-related constants that can be redefined, also the
number of classes for the batch..., etc. You know what I'm talking about if
you're reading this message. What else is involved into this trouble? Please
give me a good advice to fix that.

I can't say that the machine is slow - a double processor monster with 2 gig
ram and fast enough hard drive can't be very slow by default. Something's
going on with the system after installation of IE7 and latest service packs
presented in December last year. Maybe it's adjustable, maybe not.

Just D.
Jan 13 '07 #1
0 1003

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

by: Joško Šugar | last post by:
I have a data transfer between an c# application and web service. The application is in local network and connects to the internet thru a gateway. Connection is ADSL. Web service is on the remote server. Timeuots are configured as follows: local timeout: <add key="WebService.Timeout" value="300000" /> remote timeout: <httpRuntime executionTimeout="300" maxRequestLength="10000"/>
by: Matt | last post by:
(can't find any of my previous post for same issue. please CC to my email address as well. Thanks!) Hi all, What is the possible reason that HttpWebRequest.GetRequestStream() may hang there until a timeout exception. Here is the stack trace and code snippet. Please do help. --Matt // stack trace System.Net.HttpWebRequest.GetRequestStream() +190
by: Sachin Surana | last post by:
We use HttpWebRequest to send the request at a URL. But some times the method GetResponse throws a time out exception. But when we check the IIS logs, there is no such entry. So the request never reached the server but the client is getting a time out exception. What could be the possible reasons? Confirmed that the request does not get lost in the network.
by: Joe | last post by:
I'm hosting my web service on a Windows 2003 box which is remotely located. When trying to add a web reference to a C# project I get an error message 'There was an error downloading 'http://mydomain.com:port/webservice.asmx' The operation has timed-out (I've tried with and without using a separate port for the service) The weird thing is the page does show up on the left side of the screen listing the available methods but the Add...
by: tlan | last post by:
Hi, I got this error when I move my web service to Windows2003 server. I spent hours scouting on the internet and could find any answer. Please help!!! I the webservice is timeout between 1 -2 minutes when my web app, which consume this webService, retrieves a large amount of data. When I perform the same operation to retrieve smaller amount of data, it works fine. The timeout value I set for my web app, web service, and sql
by: Sumit Acharya | last post by:
I am using following script to connect to the server and i try the connection for 1000 times. Some times it succeeds for all the 1000 times,but some times it fails with error:- 10060, 'Operation timed out'. When it fails with the abover error, it seems timed out time is 20 seconds. Is there a way I can increase the timedout time for FTP? from ftplib import FTP import time import sys
by: JuHui | last post by:
I wrote a script to get 100 pages from a server. like below: 1:import httplib 2:conns = httplib.HTTPConnection("www.mytest.com") 3:conn.request("GET", "/") sometimes a socket error was raised. File "D:\usr\bin\lib\httplib.py", line 627, in connect
by: Jim Underwood | last post by:
I am having a problem with my web page timng out while retrieving a long runnign report (90-120 seconds. I have tried modifying several settings in various places and cannot get it to run for more than 90 seconds. I am running VS.Net and the app is ASP.Net, written using VB.Net. The app calls an asp.Net web service to retrieve the report. Both the web site and the web service are running locally on my PC. I have tried modifying the...
by: Pooja | last post by:
Hi, I am calling a web service to get Latitude and Longitude by sending a zip code. This is happening inside a loop (2000 - 3000 times). After say 80 times, it gives me an error - The operation has timed out. If I continue by pressing F10, the process starts again and everything is fine. After some time again it will stop, show me an error on the line where I am calling webservice and if i say F10, it will again continue. I wanted to...
by: Pratappeddinti | last post by:
I am getting operation timed out exception when i am using webservices. What is this operation timed out exception. How can i fix this problem.
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth. The Art of Business Website Design Your website is...
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
by: adsilva | last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.