473,729 Members | 2,401 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Localization toolkit

I'm having the sam problem as described below with the Localization
toolkit. Does anyone know if there is a solution to this problem.

--->When attempting to generate resource dlls with
--->LocalizationMa nagement.exe, I get an exception:
--->Unable to generate loose file resources


Gordon


Error as above.

Does anyone know how to fix it?
Searched NG for that problem and this is what I found:

=============== =============== =============== ======
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationMan agement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

=============== =============== =============== =====

How long can it take to find someone who knows the answer?
I'm desperate.
MH
Message 2 in thread
From: Todd Abel [MSFT] (to******@onlin e.microsoft.com )
Subject: RE: Unable to generate loose file resources, Localization
Toolkit
View this article only
Newsgroups: microsoft.publi c.dotnet.framew ork
Date: 2003-09-29 18:48:08 PST
The source code for the management application was not release as part
of the toolkit. As stated in the article the toolkit is unsupported,
although there is a email that you can send feedback to
(en******@micro soft.com) and questions are often answered.

Todd.

--------------------
From: "Marius Horak" <so*****@europe .eu>
Subject: Unable to generate loose file resources, Localization ToolkitDate: Mon, 22 Sep 2003 16:17:14 +0100
Lines: 30
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
Message-ID: <uf************ **@TK2MSFTNGP11 .phx.gbl>
Newsgroups: microsoft.publi c.dotnet.framew ork
NNTP-Posting-Host: 213.52.140.99
Path: cpmsftngxa06.ph x.gbl!TK2MSFTNG P08.phx.gbl!TK2 MSFTNGP11.phx.g bl
Xref: cpmsftngxa06.ph x.gbl microsoft.publi c.dotnet.framew ork:54392
X-Tomcat-NG: microsoft.publi c.dotnet.framew ork

Error as above.

Does anyone know how to fix it?
Searched NG for that problem and this is what I found:

============== =============== =============== =======
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationMa nagement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

============== =============== =============== ======

How long can it take to find someone who knows the answer?
I'm desperate.
MH

Nov 18 '05 #1
6 1986
Hi,
I had the same problem as you, but after some testing, I finally found
the what caused this error for me.

1. I needed to add the framework-location into the path-environment
variable. I thought it was there, but it obviously was not.
(C:\WINDOWS\Mic rosoft.NET\Fram ework\v1.1.4322 on my computer)

2. One must type the filename into the Neutral Language File-textbox
*exactly* the same way as the application name in the Localization
Toolkit. That is, I had written all in lowercase, where as the
application name was mixed mode.

...and voilà! It all ran smoothly!

Good luck!
Marius

gj******@access wave.ca (Rental) wrote in message news:<a9******* *************** ****@posting.go ogle.com>...
I'm having the sam problem as described below with the Localization
toolkit. Does anyone know if there is a solution to this problem.

--->When attempting to generate resource dlls with
--->LocalizationMa nagement.exe, I get an exception:
--->Unable to generate loose file resources


Gordon


Error as above.

Does anyone know how to fix it?
Searched NG for that problem and this is what I found:

=============== =============== =============== ======
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationMan agement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

=============== =============== =============== =====

How long can it take to find someone who knows the answer?
I'm desperate.
MH
Message 2 in thread
From: Todd Abel [MSFT] (to******@onlin e.microsoft.com )
Subject: RE: Unable to generate loose file resources, Localization
Toolkit
View this article only
Newsgroups: microsoft.publi c.dotnet.framew ork
Date: 2003-09-29 18:48:08 PST
The source code for the management application was not release as part
of the toolkit. As stated in the article the toolkit is unsupported,
although there is a email that you can send feedback to
(en******@micro soft.com) and questions are often answered.

Todd.

--------------------
From: "Marius Horak" <so*****@europe .eu>
Subject: Unable to generate loose file resources, Localization

Toolkit
Date: Mon, 22 Sep 2003 16:17:14 +0100
Lines: 30
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
Message-ID: <uf************ **@TK2MSFTNGP11 .phx.gbl>
Newsgroups: microsoft.publi c.dotnet.framew ork
NNTP-Posting-Host: 213.52.140.99
Path: cpmsftngxa06.ph x.gbl!TK2MSFTNG P08.phx.gbl!TK2 MSFTNGP11.phx.g bl
Xref: cpmsftngxa06.ph x.gbl microsoft.publi c.dotnet.framew ork:54392
X-Tomcat-NG: microsoft.publi c.dotnet.framew ork

Error as above.

Does anyone know how to fix it?
Searched NG for that problem and this is what I found:

============== =============== =============== =======
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationMa nagement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

============== =============== =============== ======

How long can it take to find someone who knows the answer?
I'm desperate.
MH

Nov 18 '05 #2
Hi Marius.
Thanks alot for your help. If you were here in Halifax, I would buy
you a beer to thank you.

Cheers,
Gordon
ha****@stud.ntn u.no (marius) wrote in message news:<c5******* *************** ****@posting.go ogle.com>...
Hi,
I had the same problem as you, but after some testing, I finally found
the what caused this error for me.

1. I needed to add the framework-location into the path-environment
variable. I thought it was there, but it obviously was not.
(C:\WINDOWS\Mic rosoft.NET\Fram ework\v1.1.4322 on my computer)

2. One must type the filename into the Neutral Language File-textbox
*exactly* the same way as the application name in the Localization
Toolkit. That is, I had written all in lowercase, where as the
application name was mixed mode.

..and voilà! It all ran smoothly!

Good luck!
Marius

gj******@access wave.ca (Rental) wrote in message news:<a9******* *************** ****@posting.go ogle.com>...
I'm having the sam problem as described below with the Localization
toolkit. Does anyone know if there is a solution to this problem.

--->When attempting to generate resource dlls with
--->LocalizationMa nagement.exe, I get an exception:
--->Unable to generate loose file resources


Gordon


Error as above.

Does anyone know how to fix it?
Searched NG for that problem and this is what I found:

=============== =============== =============== ======
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationMan agement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

=============== =============== =============== =====

How long can it take to find someone who knows the answer?
I'm desperate.
MH
Message 2 in thread
From: Todd Abel [MSFT] (to******@onlin e.microsoft.com )
Subject: RE: Unable to generate loose file resources, Localization
Toolkit
View this article only
Newsgroups: microsoft.publi c.dotnet.framew ork
Date: 2003-09-29 18:48:08 PST
The source code for the management application was not release as part
of the toolkit. As stated in the article the toolkit is unsupported,
although there is a email that you can send feedback to
(en******@micro soft.com) and questions are often answered.

Todd.

--------------------
From: "Marius Horak" <so*****@europe .eu>
Subject: Unable to generate loose file resources, Localization ToolkitDate: Mon, 22 Sep 2003 16:17:14 +0100
Lines: 30
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
Message-ID: <uf************ **@TK2MSFTNGP11 .phx.gbl>
Newsgroups: microsoft.publi c.dotnet.framew ork
NNTP-Posting-Host: 213.52.140.99
Path: cpmsftngxa06.ph x.gbl!TK2MSFTNG P08.phx.gbl!TK2 MSFTNGP11.phx.g bl
Xref: cpmsftngxa06.ph x.gbl microsoft.publi c.dotnet.framew ork:54392
X-Tomcat-NG: microsoft.publi c.dotnet.framew ork

Error as above.

Does anyone know how to fix it?
Searched NG for that problem and this is what I found:

============== =============== =============== =======
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationMa nagement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

============== =============== =============== ======

How long can it take to find someone who knows the answer?
I'm desperate.
MH

Nov 18 '05 #3
Hi Marius.
Thanks alot for your help. If you were here in Halifax, I would buy
you a beer to thank you.

Cheers,
Gordon
ha****@stud.ntn u.no (marius) wrote in message news:<c5******* *************** ****@posting.go ogle.com>...
Hi,
I had the same problem as you, but after some testing, I finally found
the what caused this error for me.

1. I needed to add the framework-location into the path-environment
variable. I thought it was there, but it obviously was not.
(C:\WINDOWS\Mic rosoft.NET\Fram ework\v1.1.4322 on my computer)

2. One must type the filename into the Neutral Language File-textbox
*exactly* the same way as the application name in the Localization
Toolkit. That is, I had written all in lowercase, where as the
application name was mixed mode.

..and voilà! It all ran smoothly!

Good luck!
Marius

gj******@access wave.ca (Rental) wrote in message news:<a9******* *************** ****@posting.go ogle.com>...
I'm having the sam problem as described below with the Localization
toolkit. Does anyone know if there is a solution to this problem.

--->When attempting to generate resource dlls with
--->LocalizationMa nagement.exe, I get an exception:
--->Unable to generate loose file resources


Gordon


Error as above.

Does anyone know how to fix it?
Searched NG for that problem and this is what I found:

=============== =============== =============== ======
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationMan agement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

=============== =============== =============== =====

How long can it take to find someone who knows the answer?
I'm desperate.
MH
Message 2 in thread
From: Todd Abel [MSFT] (to******@onlin e.microsoft.com )
Subject: RE: Unable to generate loose file resources, Localization
Toolkit
View this article only
Newsgroups: microsoft.publi c.dotnet.framew ork
Date: 2003-09-29 18:48:08 PST
The source code for the management application was not release as part
of the toolkit. As stated in the article the toolkit is unsupported,
although there is a email that you can send feedback to
(en******@micro soft.com) and questions are often answered.

Todd.

--------------------
From: "Marius Horak" <so*****@europe .eu>
Subject: Unable to generate loose file resources, Localization ToolkitDate: Mon, 22 Sep 2003 16:17:14 +0100
Lines: 30
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
Message-ID: <uf************ **@TK2MSFTNGP11 .phx.gbl>
Newsgroups: microsoft.publi c.dotnet.framew ork
NNTP-Posting-Host: 213.52.140.99
Path: cpmsftngxa06.ph x.gbl!TK2MSFTNG P08.phx.gbl!TK2 MSFTNGP11.phx.g bl
Xref: cpmsftngxa06.ph x.gbl microsoft.publi c.dotnet.framew ork:54392
X-Tomcat-NG: microsoft.publi c.dotnet.framew ork

Error as above.

Does anyone know how to fix it?
Searched NG for that problem and this is what I found:

============== =============== =============== =======
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationMa nagement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

============== =============== =============== ======

How long can it take to find someone who knows the answer?
I'm desperate.
MH

Nov 18 '05 #4
Hi Gordon,
Just happy to help!

Perhaps you can help me as well.
I've run into some problems using the localization toolkit.
When I try to inherit from it in the aspx-pages, either by:
Inherits="Micro soft.Toolkits.E nterpriseLocali zation.Localize dPage" in
the @page-directive, or by:
public class LocTest1 :
Microsoft.Toolk its.EnterpriseL ocalization.Loc alizedPage
in the codebehind, I just the familiar error:
"Object reference not set to an instance of an object"
in the Microsoft.Toolk its.EnterpriseL ocalization.Set tings-class (see
below).
Any ideas?

Rgds
Marius

Error:
NullReferenceEx ception: Object reference not set to an instance of an
object.]
Microsoft.Toolk its.EnterpriseL ocalization.Set tings.get_Curre ntManager()
+222
Microsoft.Toolk its.EnterpriseL ocalization.Loc alizedPage.Proc essControl(Cont rol
c, ArrayList affectedControl s, Boolean includeChildren ) +28
Microsoft.Toolk its.EnterpriseL ocalization.Loc alizedPage.Iter ateControls(Con trolCollection
controls, ArrayList affectedControl s) +35
Microsoft.Toolk its.EnterpriseL ocalization.Loc alizedPage.Proc essControl(Cont rol
c, ArrayList affectedControl s, Boolean includeChildren ) +110
Microsoft.Toolk its.EnterpriseL ocalization.Loc alizedPage.Iter ateControls(Con trolCollection
controls, ArrayList affectedControl s) +35
Microsoft.Toolk its.EnterpriseL ocalization.Loc alizedPage.OnPr eRender(EventAr gs
evt) +158
System.Web.UI.C ontrol.PreRende rRecursiveInter nal() +62
System.Web.UI.P age.ProcessRequ estMain() +1489

gj******@access wave.ca (Rental) wrote in message news:<a9******* *************** ****@posting.go ogle.com>...
Hi Marius.
Thanks alot for your help. If you were here in Halifax, I would buy
you a beer to thank you.

Cheers,
Gordon
ha****@stud.ntn u.no (marius) wrote in message news:<c5******* *************** ****@posting.go ogle.com>...
Hi,
I had the same problem as you, but after some testing, I finally found
the what caused this error for me.

1. I needed to add the framework-location into the path-environment
variable. I thought it was there, but it obviously was not.
(C:\WINDOWS\Mic rosoft.NET\Fram ework\v1.1.4322 on my computer)

2. One must type the filename into the Neutral Language File-textbox
*exactly* the same way as the application name in the Localization
Toolkit. That is, I had written all in lowercase, where as the
application name was mixed mode.

..and voilà! It all ran smoothly!

Good luck!
Marius

gj******@access wave.ca (Rental) wrote in message news:<a9******* *************** ****@posting.go ogle.com>...
I'm having the sam problem as described below with the Localization
toolkit. Does anyone know if there is a solution to this problem.

--->When attempting to generate resource dlls with
--->LocalizationMa nagement.exe, I get an exception:
--->Unable to generate loose file resources


Gordon


Error as above.

Does anyone know how to fix it?
Searched NG for that problem and this is what I found:

=============== =============== =============== ======
Q (July 17, 2003):
When attempting to generate resource dlls with
LocalizationMan agement.exe, I get an exception:
Unable to generate loose file resources

A (July 21, 2003):

I'm looking for someone who can assist you. Thanks.

Best regards,
Yanhong Huang
Microsoft Online Partner Support

=============== =============== =============== =====

How long can it take to find someone who knows the answer?
I'm desperate.
MH
Message 2 in thread
From: Todd Abel [MSFT] (to******@onlin e.microsoft.com )
Subject: RE: Unable to generate loose file resources, Localization
Toolkit
View this article only
Newsgroups: microsoft.publi c.dotnet.framew ork
Date: 2003-09-29 18:48:08 PST
The source code for the management application was not release as part
of the toolkit. As stated in the article the toolkit is unsupported,
although there is a email that you can send feedback to
(en******@micro soft.com) and questions are often answered.

Todd.

--------------------
>From: "Marius Horak" <so*****@europe .eu>
>Subject: Unable to generate loose file resources, Localization Toolkit >Date: Mon, 22 Sep 2003 16:17:14 +0100
>Lines: 30
>X-Priority: 3
>X-MSMail-Priority: Normal
>X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
>X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
>Message-ID: <uf************ **@TK2MSFTNGP11 .phx.gbl>
>Newsgroups: microsoft.publi c.dotnet.framew ork
>NNTP-Posting-Host: 213.52.140.99
>Path: cpmsftngxa06.ph x.gbl!TK2MSFTNG P08.phx.gbl!TK2 MSFTNGP11.phx.g bl
>Xref: cpmsftngxa06.ph x.gbl microsoft.publi c.dotnet.framew ork:54392
>X-Tomcat-NG: microsoft.publi c.dotnet.framew ork
>
>Error as above.
>
>Does anyone know how to fix it?
>
>
>Searched NG for that problem and this is what I found:
>
>============== =============== =============== =======
>Q (July 17, 2003):
>When attempting to generate resource dlls with
>LocalizationMa nagement.exe, I get an exception:
>Unable to generate loose file resources
>
>A (July 21, 2003):
>
>I'm looking for someone who can assist you. Thanks.
>
>Best regards,
>Yanhong Huang
>Microsoft Online Partner Support
>
>============== =============== =============== ======
>
>How long can it take to find someone who knows the answer?
>I'm desperate.
>
>
>MH
>
>
>

Nov 18 '05 #5
Hi Marius.
Could you possibly send or post some of the code if you are still
having the problem you mentioned in your previous post. This would
make it easier for me to determine what the problem might be.

Gordon

ha****@stud.ntn u.no (marius) wrote in message news:<c5******* *************** ****@posting.go ogle.com>...
Hi Gordon,
Just happy to help!

Perhaps you can help me as well.
I've run into some problems using the localization toolkit.
When I try to inherit from it in the aspx-pages, either by:
Inherits="Micro soft.Toolkits.E nterpriseLocali zation.Localize dPage" in
the @page-directive, or by:
public class LocTest1 :
Microsoft.Toolk its.EnterpriseL ocalization.Loc alizedPage
in the codebehind, I just the familiar error:
"Object reference not set to an instance of an object"
in the Microsoft.Toolk its.EnterpriseL ocalization.Set tings-class (see
below).
Any ideas?

Rgds
Marius

Error:
NullReferenceEx ception: Object reference not set to an instance of an
object.]
Microsoft.Toolk its.EnterpriseL ocalization.Set tings.get_Curre ntManager()
+222
Microsoft.Toolk its.EnterpriseL ocalization.Loc alizedPage.Proc essControl(Cont rol
c, ArrayList affectedControl s, Boolean includeChildren ) +28
Microsoft.Toolk its.EnterpriseL ocalization.Loc alizedPage.Iter ateControls(Con trolCollection
controls, ArrayList affectedControl s) +35
Microsoft.Toolk its.EnterpriseL ocalization.Loc alizedPage.Proc essControl(Cont rol
c, ArrayList affectedControl s, Boolean includeChildren ) +110
Microsoft.Toolk its.EnterpriseL ocalization.Loc alizedPage.Iter ateControls(Con trolCollection
controls, ArrayList affectedControl s) +35
Microsoft.Toolk its.EnterpriseL ocalization.Loc alizedPage.OnPr eRender(EventAr gs
evt) +158
System.Web.UI.C ontrol.PreRende rRecursiveInter nal() +62
System.Web.UI.P age.ProcessRequ estMain() +1489

gj******@access wave.ca (Rental) wrote in message news:<a9******* *************** ****@posting.go ogle.com>...
Hi Marius.
Thanks alot for your help. If you were here in Halifax, I would buy
you a beer to thank you.

Cheers,
Gordon
ha****@stud.ntn u.no (marius) wrote in message news:<c5******* *************** ****@posting.go ogle.com>...
Hi,
I had the same problem as you, but after some testing, I finally found
the what caused this error for me.

1. I needed to add the framework-location into the path-environment
variable. I thought it was there, but it obviously was not.
(C:\WINDOWS\Mic rosoft.NET\Fram ework\v1.1.4322 on my computer)

2. One must type the filename into the Neutral Language File-textbox
*exactly* the same way as the application name in the Localization
Toolkit. That is, I had written all in lowercase, where as the
application name was mixed mode.

..and voilà! It all ran smoothly!

Good luck!
Marius

gj******@access wave.ca (Rental) wrote in message news:<a9******* *************** ****@posting.go ogle.com>...
> I'm having the sam problem as described below with the Localization
> toolkit. Does anyone know if there is a solution to this problem.
>
> --->When attempting to generate resource dlls with
> --->LocalizationMa nagement.exe, I get an exception:
> --->Unable to generate loose file resources
>
>
>
>
> Gordon
>
>
>
>
>
>
> Error as above.
>
> Does anyone know how to fix it?
>
>
> Searched NG for that problem and this is what I found:
>
> =============== =============== =============== ======
> Q (July 17, 2003):
> When attempting to generate resource dlls with
> LocalizationMan agement.exe, I get an exception:
> Unable to generate loose file resources
>
> A (July 21, 2003):
>
> I'm looking for someone who can assist you. Thanks.
>
> Best regards,
> Yanhong Huang
> Microsoft Online Partner Support
>
> =============== =============== =============== =====
>
> How long can it take to find someone who knows the answer?
> I'm desperate.
>
>
> MH
> Message 2 in thread
> From: Todd Abel [MSFT] (to******@onlin e.microsoft.com )
> Subject: RE: Unable to generate loose file resources, Localization
> Toolkit
>
>
> View this article only
> Newsgroups: microsoft.publi c.dotnet.framew ork
> Date: 2003-09-29 18:48:08 PST
>
>
> The source code for the management application was not release as part
> of the toolkit. As stated in the article the toolkit is unsupported,
> although there is a email that you can send feedback to
> (en******@micro soft.com) and questions are often answered.
>
> Todd.
>
> --------------------
> >From: "Marius Horak" <so*****@europe .eu>
> >Subject: Unable to generate loose file resources, Localization Toolkit > >Date: Mon, 22 Sep 2003 16:17:14 +0100
> >Lines: 30
> >X-Priority: 3
> >X-MSMail-Priority: Normal
> >X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
> >X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
> >Message-ID: <uf************ **@TK2MSFTNGP11 .phx.gbl>
> >Newsgroups: microsoft.publi c.dotnet.framew ork
> >NNTP-Posting-Host: 213.52.140.99
> >Path: cpmsftngxa06.ph x.gbl!TK2MSFTNG P08.phx.gbl!TK2 MSFTNGP11.phx.g bl
> >Xref: cpmsftngxa06.ph x.gbl microsoft.publi c.dotnet.framew ork:54392
> >X-Tomcat-NG: microsoft.publi c.dotnet.framew ork
> >
> >Error as above.
> >
> >Does anyone know how to fix it?
> >
> >
> >Searched NG for that problem and this is what I found:
> >
> >============== =============== =============== =======
> >Q (July 17, 2003):
> >When attempting to generate resource dlls with
> >LocalizationMa nagement.exe, I get an exception:
> >Unable to generate loose file resources
> >
> >A (July 21, 2003):
> >
> >I'm looking for someone who can assist you. Thanks.
> >
> >Best regards,
> >Yanhong Huang
> >Microsoft Online Partner Support
> >
> >============== =============== =============== ======
> >
> >How long can it take to find someone who knows the answer?
> >I'm desperate.
> >
> >
> >MH
> >
> >
> >

Nov 18 '05 #6
Hi Gordon,
Thanx, but I've ended up not using the Localization Toolkit. It seemed
to be too unstable/errorprone, so I went back to doing it with a
hierarchy of resource files (string.resx, string.no.resx etc).

All my attempts to access properties threw errors. I couldn't get the
elementresource set either, and could only use resourcemanager s
getString(). That worked on elements text-attributes, but then again,
that wasn't how I'd intended to use this.

Marius

cr******@hotmai l.com (gmanupnorth) wrote in message news:<29******* *************** ***@posting.goo gle.com>...
Hi Marius.
Could you possibly send or post some of the code if you are still
having the problem you mentioned in your previous post. This would
make it easier for me to determine what the problem might be.

Gordon

ha****@stud.ntn u.no (marius) wrote in message news:<c5******* *************** ****@posting.go ogle.com>...
Hi Gordon,
Just happy to help!

Perhaps you can help me as well.
I've run into some problems using the localization toolkit.
When I try to inherit from it in the aspx-pages, either by:
Inherits="Micro soft.Toolkits.E nterpriseLocali zation.Localize dPage" in
the @page-directive, or by:
public class LocTest1 :
Microsoft.Toolk its.EnterpriseL ocalization.Loc alizedPage
in the codebehind, I just the familiar error:
"Object reference not set to an instance of an object"
in the Microsoft.Toolk its.EnterpriseL ocalization.Set tings-class (see
below).
Any ideas?

Rgds
Marius

Error:
NullReferenceEx ception: Object reference not set to an instance of an
object.]
Microsoft.Toolk its.EnterpriseL ocalization.Set tings.get_Curre ntManager()
+222
Microsoft.Toolk its.EnterpriseL ocalization.Loc alizedPage.Proc essControl(Cont rol
c, ArrayList affectedControl s, Boolean includeChildren ) +28
Microsoft.Toolk its.EnterpriseL ocalization.Loc alizedPage.Iter ateControls(Con trolCollection
controls, ArrayList affectedControl s) +35
Microsoft.Toolk its.EnterpriseL ocalization.Loc alizedPage.Proc essControl(Cont rol
c, ArrayList affectedControl s, Boolean includeChildren ) +110
Microsoft.Toolk its.EnterpriseL ocalization.Loc alizedPage.Iter ateControls(Con trolCollection
controls, ArrayList affectedControl s) +35
Microsoft.Toolk its.EnterpriseL ocalization.Loc alizedPage.OnPr eRender(EventAr gs
evt) +158
System.Web.UI.C ontrol.PreRende rRecursiveInter nal() +62
System.Web.UI.P age.ProcessRequ estMain() +1489

gj******@access wave.ca (Rental) wrote in message news:<a9******* *************** ****@posting.go ogle.com>...
Hi Marius.
Thanks alot for your help. If you were here in Halifax, I would buy
you a beer to thank you.

Cheers,
Gordon
ha****@stud.ntn u.no (marius) wrote in message news:<c5******* *************** ****@posting.go ogle.com>...
> Hi,
> I had the same problem as you, but after some testing, I finally found
> the what caused this error for me.
>
> 1. I needed to add the framework-location into the path-environment
> variable. I thought it was there, but it obviously was not.
> (C:\WINDOWS\Mic rosoft.NET\Fram ework\v1.1.4322 on my computer)
>
> 2. One must type the filename into the Neutral Language File-textbox
> *exactly* the same way as the application name in the Localization
> Toolkit. That is, I had written all in lowercase, where as the
> application name was mixed mode.
>
> ..and voilà! It all ran smoothly!
>
> Good luck!
> Marius
>
> gj******@access wave.ca (Rental) wrote in message news:<a9******* *************** ****@posting.go ogle.com>...
> > I'm having the sam problem as described below with the Localization
> > toolkit. Does anyone know if there is a solution to this problem.
> >
> > --->When attempting to generate resource dlls with
> > --->LocalizationMa nagement.exe, I get an exception:
> > --->Unable to generate loose file resources
> >
> >
> >
> >
> > Gordon
> >
> >
> >
> >
> >
> >
> > Error as above.
> >
> > Does anyone know how to fix it?
> >
> >
> > Searched NG for that problem and this is what I found:
> >
> > =============== =============== =============== ======
> > Q (July 17, 2003):
> > When attempting to generate resource dlls with
> > LocalizationMan agement.exe, I get an exception:
> > Unable to generate loose file resources
> >
> > A (July 21, 2003):
> >
> > I'm looking for someone who can assist you. Thanks.
> >
> > Best regards,
> > Yanhong Huang
> > Microsoft Online Partner Support
> >
> > =============== =============== =============== =====
> >
> > How long can it take to find someone who knows the answer?
> > I'm desperate.
> >
> >
> > MH
> > Message 2 in thread
> > From: Todd Abel [MSFT] (to******@onlin e.microsoft.com )
> > Subject: RE: Unable to generate loose file resources, Localization
> > Toolkit
> >
> >
> > View this article only
> > Newsgroups: microsoft.publi c.dotnet.framew ork
> > Date: 2003-09-29 18:48:08 PST
> >
> >
> > The source code for the management application was not release as part
> > of the toolkit. As stated in the article the toolkit is unsupported,
> > although there is a email that you can send feedback to
> > (en******@micro soft.com) and questions are often answered.
> >
> > Todd.
> >
> > --------------------
> > >From: "Marius Horak" <so*****@europe .eu>
> > >Subject: Unable to generate loose file resources, Localization Toolkit > > >Date: Mon, 22 Sep 2003 16:17:14 +0100
> > >Lines: 30
> > >X-Priority: 3
> > >X-MSMail-Priority: Normal
> > >X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
> > >X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
> > >Message-ID: <uf************ **@TK2MSFTNGP11 .phx.gbl>
> > >Newsgroups: microsoft.publi c.dotnet.framew ork
> > >NNTP-Posting-Host: 213.52.140.99
> > >Path: cpmsftngxa06.ph x.gbl!TK2MSFTNG P08.phx.gbl!TK2 MSFTNGP11.phx.g bl
> > >Xref: cpmsftngxa06.ph x.gbl microsoft.publi c.dotnet.framew ork:54392
> > >X-Tomcat-NG: microsoft.publi c.dotnet.framew ork
> > >
> > >Error as above.
> > >
> > >Does anyone know how to fix it?
> > >
> > >
> > >Searched NG for that problem and this is what I found:
> > >
> > >============== =============== =============== =======
> > >Q (July 17, 2003):
> > >When attempting to generate resource dlls with
> > >LocalizationMa nagement.exe, I get an exception:
> > >Unable to generate loose file resources
> > >
> > >A (July 21, 2003):
> > >
> > >I'm looking for someone who can assist you. Thanks.
> > >
> > >Best regards,
> > >Yanhong Huang
> > >Microsoft Online Partner Support
> > >
> > >============== =============== =============== ======
> > >
> > >How long can it take to find someone who knows the answer?
> > >I'm desperate.
> > >
> > >
> > >MH
> > >
> > >
> > >

Nov 18 '05 #7

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

2
1439
by: Fabian Dal Santo | last post by:
We have been using the Enterprise Localization Toolkit for a project and it seems to have a bug. It assumes that all cultures are 5 char in length e.g. English(Australian) en-AU, but the .NET framework has some that are actually 6 characters in length, e.g. Chinese(Traditional) zh-CHT. Since Chinese(Simplified) is zh-CHS, we can't simply use the truncated version. Has something changed in the .NET framework to cause this error? Has...
1
1392
by: Rental | last post by:
Can anyone send me these files: ApplicationCultures.txt Applications.txt ControlTypes.txt CultureProperties.txt DictionaryProperties.txt Elements.txt Properties.txt
1
1484
by: handlim | last post by:
I use Localization Toolkit to transfer language. but, the resource file is made from database. but, I dropped the database that have data for resource file by mistake. Is it possible to transfer data from the resource file to database? If not, Is it possible to join two resource files to one. I need help so much. If there is no way to restore data, I have to type all of data by myself. Thank you.
11
1976
by: Manish Pansiniya | last post by:
Hello to all, we want to update resource online when administrator changes Localization database. can anybody tell me weather it is possible to run localization toolkit in command line or as batch process to generate satellite assembly ??? Reply ASAP whatever it is.
1
2393
by: MarkMurphy | last post by:
We had downloaded the Enterprise Localization Framework a few months ago for evaluation and were using it under .NET Framework 1.0. We've just now upgraded to .NET Framework 1.1 and have started having problems. When attempting to generate resource dlls with LocalizationManagement.exe, I get an exception: Unable to generate loose file resources: The type initializer for "Microsoft.Toolkits.EnterpriseLocalization.ElementResourceSet"...
3
1472
by: Eric | last post by:
Hi, I'm just looking into the samples that are delivered withthe Enterprise Localization Framework/Toolkit. I have set it up and it all works fine. But.. now i have a question. I read a post, from a Microsoft employee i belief, and he stated the following: >3) The AutoPopulate feature doesn't work as well as I
2
1881
by: guy | last post by:
I am wondering if the Enterprise Localization Toolkit meant for development or is it to be regarded as a tutorial. Are there any other commercial or free products that will do this? http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnaspp/html/entloctoolkit.asp
1
1241
by: gmanupnorth | last post by:
Can anyone send me these files: ApplicationCultures.txt Applications.txt ControlTypes.txt CultureProperties.txt DictionaryProperties.txt Elements.txt Properties.txt
0
948
by: Servé La | last post by:
I'm trying to get a test application going with MS Localization toolkit but I have problems. They are even toolkit related. 1. The help says to generate resource files, click on the deployment link on the admin page....there is no deployment link. 2. The viewer.exe throws an exception, whatever satelite assembly I try to open (even the ones generated for the samples) 3. Localizationmanagement.exe doesnt even let me fill in a database...
0
8921
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
0
9427
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...
1
9202
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
0
9148
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
0
8151
agi2029
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own.... Now, this would greatly impact the work of software developers. The idea...
0
6022
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...
0
4528
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
1
3238
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
3
2165
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.