473,729 Members | 2,409 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

PAGE_LOAD invoked twice

RAJ
This event appears to be invoked twice for absolutely no reason on only one
of my ASP.Net web user controls. Although I've now overcome the problem by
overriding the base classes OnLoad routine, I could never figure out why
this event was being invoked twice.

Private Sub Page_Load(ByVal sender As System.Object, ByVal e As
System.EventArg s) Handles MyBase.Load
'Put user code to initialize the page here

End Sub

It inherits from the following superclass:
System.Web.UI.U serControl

This is the scenario:

When this 'Page_Load' routine was invoked; the call stack as soon as the
procedure begins shows (when non-user code was viewed) that the base classes
OnLoad routine invoked (by doing what ever it does) it.

The strange thing happened when the routine was exiting; I even removed ALL
of the code from the routine and debugged it whilst dissassembly was shown,
and as soon as the routine exited (via the assembler instruction RET 4) the
routine would IMMEDIATELY invoke again!!!

INFACT, the routine didn't even exit! it immediately went back to the top of
the routine and ran again.

The second time it would reach the end of the procedure (instruction RET 4
again) and would correctly return back to the calling method (OnLoad).

This appeared to be completely unpredictable behaviour; as the containing
code was getting executed twice (since i am expecting only 1 page_load per
build/teardown per object).

I can only theorise that somewhere, unless its a logic error of my own (but
I tested it in a seperate ASP Page, with just the user control removing
LOADS of code to test it; still did it) that its unpredictable behaviour
caused by event handling references.

What I would like to know is this:

Is there any advantages/disadvantages to just overiding the base classes
OnLoad routine?

One obvious advantage is you can chose when to invoke the base classes
OnLoad routine to continue normal processing. But I can't find any
disadvantages!

Secondly, has anyone else experienced such behaviour?
Nov 18 '05 #1
0 1238

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

0
1007
by: RAJ | last post by:
This event appears to be invoked twice for absolutely no reason on only one of my ASP.Net web user controls. Although I've now overcome the problem by overriding the base classes OnLoad routine, I could never figure out why this event was being invoked twice. Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load 'Put user code to initialize the page here End Sub
2
1461
by: RAJ | last post by:
Posting this thread again, can somebody please help me with this. Thanks. This event appears to be invoked twice for absolutely no reason on only one of my ASP.Net web user controls. Although I've now overcome the problem by overriding the base classes OnLoad routine, I could never figure out why this event was being invoked twice. Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load...
4
2997
by: Julia | last post by:
Hi Everyone, I am using webbrowser control to post data to an aspx page. However, for some reason, the aspx page sometimes will execute page_load event twice, and sometimes execute it once. So I might get different results for executing it. If I have the webbrwoser control to call it the first time, the aspx will usually execute the page_load twice. What can be the problem?
6
6003
by: Dot net work | last post by:
I've read quite a few threads on these groups about this. When someone says the following: "My Page_Load gets called twice on a button click postback" The replies are: "Do you have AutoEventWireup=True in your page header?" In my project, I have this set to false - everywhere.
14
13113
by: V. Jenks | last post by:
I'm a little rusty having not touched .NET for 6 months and I can't remember why Page_Load is happening twice in this code: private void Page_Load(object sender, System.EventArgs e) { //existing session? if (Session == null) { //save local empty order object this._newOrder = Orders.Initialize();
2
2222
by: Dave | last post by:
Hi, this is a follow-up to an earlier question but I really haven't found a definitive answer in my search If I have a Base and Derived webform, I've found that the dervived Page_Load event fires first, then the base Page_Load. Is the only technique to change this sequence is to override the Base.Page_Load and explicitely call the base event when you want to as below: Derived WebForm
4
3990
by: Seraph | last post by:
Again, I'm rather new here, so if I fail to follow any etiquette, please forgive me and let me know what I've done wrong, but I think this might interest quite a few people. One of my colleaques was endeavoring to create a custom user control to make things a bit simpler, but she noticed that her Page_Load eventhandler was firing twice. So after long hours of research and experimentation, I stumbled upon, imho, is quite the discovery. ...
1
6955
by: puja | last post by:
hi all, I have this .aspx page for which the Page_load event occurs twice. I found out while debugging. After searching google, I tried checking with Page.Ispostback method and also had "AutoEventWireUp" = false and also run after removing this tag from page directive but still my page_load event gets called twice. I have 3 pages called Search.asp, Processing.aspx and ConfirmSearch.aspx.
11
2700
by: fiefie.niles | last post by:
I am using ASP.NET 2005 and I have a simple form. Page_Load calls a sub mySub that does not do anything (for testing purposes). But, Page_Load gets called twice. On every single ASPX page in my site, Page_Load gets called twice. Why is that and how can I fix this problem ? Thank you very much. Imports System.IO Namespace myProject Partial Class WebForm1
0
8921
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
0
9427
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...
0
9284
jinu1996
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth. The Art of Business Website Design Your website is...
0
9148
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
1
6722
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
0
6022
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...
0
4528
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
0
4796
by: adsilva | last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
2
2683
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.