473,695 Members | 2,492 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Cannot create ASP.NET WEB Application

Hi,

Does somebody can give me the advice how to overcome the problem like the
next? When trying create new project in Ms Visual Studio .NET 2003 I
constantly get the message "The WEB server reported the following error when
attempting to create or open the Web project locates at the followin URL:
'http://MyServer/WebApplication1 '.'HTTP/1.1 500 Server Error''". I'm working
under WinXP Servicepack 1. IIS is installed and configured, the Framework
version is 1.1, the ASP.NET is registered. I can contact my IIS from browser
when entering address 'http://localhost/some.html', but *.aspx pages return
the same error message 'HTTP 500 - Internal server error
Internet Explorer '.

Thanks in advance

George
Nov 17 '05 #1
2 1825
George,

I have the same problem. I did what Steve C. Orr, MCSD, suggested July, 15
in this NG in response to Joe D's message "Running IIS locally" and had no
success. Help would be greatly appreciated. I've been stuck for a whole week
now.

Regards
Reto.
Nov 17 '05 #2
Reto,

The method described doesn't work. I searched many sources for recipe, but
the the recommended measures didn't work too. Possibly, this is the
consequence of installing Ms Vs2003 over beta-version. Let's wait for a
while. If I shall not find solution I'll reinstall WinXP - the best remedy
for all problems, but the source of bad headache.

George.


Nov 17 '05 #3

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

8
50581
by: Alex Ang | last post by:
I have written the following VBScript program. It is stored into a file "map_drive.vbs". It successfully mapped to a network drive \\server1\data. Dim WshNetwork Set WshNetwork = WScript.CreateObject("WScript.Network") sPwd = inputbox("Enter password") WshNetwork.MapNetworkDrive "J:", "\\server1\data", false, "xyz_net\John", sPwd Msgbox "Drives has been map successful"
0
3453
by: Amol Shambharkar | last post by:
Hello Everyone, I am hoping someone could help me out with this.I am using Visual Studio .NET 2003 to create a web application on a remote IIS 5.0 server using the File Share web access method.The problem is I get the following two errors everytime I try to create the application: Error 1: The web was created successfully, but an error occured trying to configure the application root of this web.Web projects may not operate correctly...
0
1770
by: CM | last post by:
Hi there: I have a web project which can be open and run without problem. I didn't open the web application for a period and during which I didn't modified any IIS items, but now I cannot open any web project even cannot create a new one. The message for create a new web project is: (Open an oldASP project got similar error.) My system is Windows 2000 Server ---------------------- The default web access mode for this project is set to...
4
3251
by: CM | last post by:
Hi there: I have a web project which can be open and run without problem. I didn't open the web application for a period and during which I didn't modified any IIS items, but now I cannot open any web project even cannot create a new one. The message for create a new web project is: (Open an oldASP project got similar error.) My system is Windows 2000 Server ---------------------- The default web access mode for this project is set to...
6
13721
by: Chad Crowder | last post by:
Getting the following error on my production server whether the file exists or not: "System.IO.IOException: Cannot create a file when that file already exists." Here's the code generating the error (seems to be happening when I try creating a directory) If dirmgr.Exists("s:\blah\" & txt_name.Text) Then lblerror.Text = lblerror.Text & "Unable to build physical path. " &
2
5574
by: W. Broersen | last post by:
I want to use Outlook.Application, but I donot get further. Dim objOLApp As Outlook.Application objOLApp = CreateObject("Outlook.Application") Everytime I'll get the following error: Cannot create ActiveX component I set in the reference the COM from Outlook... Does someone know how to solve this problem????
2
6700
by: Roberto Rocco | last post by:
Whenever I try to create a new ASP Web Page I get this message : "Visual Studio cannot create or open the application because the Web server on this computer is not running. Start the Web server before proceeding." Well, looking at my services I find that both WWW Publishing Services and IIS are started. I also successfully restarted both of them, but still keep getting the error message.
2
9776
by: Jay Bienvenu | last post by:
I cannot create new Web applications in Visual Studio .NET 2003. I get this error message: "Visual Studio .NET cannot create or open the application. The likeliest problem is that required components are not installed on the local Web server. Run Visual Studio .NET setup and add the Web Development commponent." So I ran the Visual Studio .NET setup and added the Web Development component...and get the same problem. The thing is that...
2
14742
by: paul.dunstone | last post by:
HI all I am using msbuild to compile my web application project. After building the solution I get the following error message: Server Error in '/Community' Application. -------------------------------------------------------------------------------- Value cannot be null.
0
2810
by: =?Utf-8?B?QWxoYW1icmEgRWlkb3MgS2lxdWVuZXQ=?= | last post by:
Hello, mister I have an application web asp.net 2.0 + vs 2005 and VS 2005 Web Application Project. Its appears this error in execution: "Cannot Create/Shadow Copy '<projectname>' when that file arleady exists" error.
0
9132
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...
0
9004
jinu1996
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth. The Art of Business Website Design Your website is...
1
8864
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
1
6506
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
0
5842
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...
0
4351
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
1
3024
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
2
2288
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.
3
1986
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.