473,554 Members | 3,166 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

SMTP Error

I have an application which sends out mails(using CDO),
the SMTP Server being a machine which is one the same
network. Most times, the mails are sent out successfully
but every once in a while, the app reports the following
"The message could not be sent to the SMTP server. The
transport error code was 0x800ccc0b. The server response
was not available.".
Also at times i get the following error:"The transport
lost its connection to the server."

Any idea why i keep getting these errors.?

I have a deadline approaching pretty fast, plz HELP...
Nov 17 '05 #1
2 3144
Hello Latha,

The error message "The transport error code was 0x800ccc0b. The server
response was not available."

Means: Server is busy.

If we use cdoSendUsingPor t in CDOSYS to send mail rapidly, it may lock up
The resolution is to use the default cdoSendUsingPic kup directory, and
allow the local SMTP service to route the mail. cdoSendUsing pickup will
take up to 30 seconds to complete its communication with the mailserver per
mail connection. cdoSendUsingPic kup, can put out mass mails because it only
creates a file I/O file into the local store.

I suggest you try this method to send out meail. For details, please check
e_pickup_direct ory_using_cdosy s_vbs.asp?frame =true

Hope it helps.

Best regards,
VS.NET, Visual C++

This posting is provided "AS IS" with no warranties, and confers no rights.
Got .Net? http://www.gotdotnet.com
!Content-Class: urn:content-classes:message
!From: "Latha Rajeev" <mi**********@v snl.com>
!Sender: "Latha Rajeev" <mi**********@v snl.com>
!Subject: SMTP Error
!Date: Thu, 26 Jun 2003 01:13:18 -0700
!Lines: 15
!Message-ID: <09************ *************** *@phx.gbl>
!MIME-Version: 1.0
!Content-Type: text/plain;
! charset="iso-8859-1"
!Content-Transfer-Encoding: 7bit
!X-Newsreader: Microsoft CDO for Windows 2000
!Thread-Index: AcM7usyyQ0tsfI/iRpWdS3vcb7R+zQ ==
!X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300
!Newsgroups: microsoft.publi c.dotnet.framew ork.aspnet
!Path: cpmsftngxa06.ph x.gbl
!Xref: cpmsftngxa06.ph x.gbl microsoft.publi c.dotnet.framew ork.aspnet:1550 31
!NNTP-Posting-Host: TK2MSFTNGXA11
!X-Tomcat-NG: microsoft.publi c.dotnet.framew ork.aspnet
!I have an application which sends out mails(using CDO),
!the SMTP Server being a machine which is one the same
!network. Most times, the mails are sent out successfully
!but every once in a while, the app reports the following
!"The message could not be sent to the SMTP server. The
!transport error code was 0x800ccc0b. The server response
!was not available.".
!Also at times i get the following error:"The transport
!lost its connection to the server."
!Any idea why i keep getting these errors.?
!I have a deadline approaching pretty fast, plz HELP...

Nov 17 '05 #2

Hello Yan-Hong Huang,
Thanx for u'r suggestion. I will be trying this out as
soon as i can.

*** Sent via Developersdex http://www.developersdex.com ***
Don't just participate in USENET...get rewarded for it!
Nov 17 '05 #3

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

by: Mike Obiku | last post by:
First of all, I'm new to PHP. For my website I have some PHP scripts to run a photo database. New users have to register them selfs. After registring the new user is getting an e-mail maid by an php script. But if the user clicks on the button to sent his info, so the PHP can sent him an e-mail, it always results in this error Warning:...
by: Alex Hunsley | last post by:
I am using the smtp module to send emails via a local SMTP server on our network. I am failing with "connection refused" error, even though we definitely have an smtp server running on port 25! the code is like this: me = 'ahunsley@companyname.com' you = 'someonelse@companyname.com' msg = '*** alert'
by: Nancy | last post by:
Hi, Is there any one knows, if I want to use mod_python to handle my html form, I must have a SMTP server on my PC(winxp pro)? Where can I get a free SMTP server? I cann't follow mod_python's manual example (http://www.svencoop.com/manual/mod/mod_python/tut-pub.html), why ... Thanks a lot.
by: bivin | last post by:
hai i am requesting your technical support. please help me. i have been working with this for five days. the problem is relating with the smtp. i am trying to send an email from the asp.net page. earlier it was showing send using not find error.
by: Charlie | last post by:
Hi: I'm working on an e-commerce site. Using the SMTP class, my site sends out confirmation messages. It works most of the time, but sometimes raises an error. I need a way of making sure it goes out every time. I thought about wrapping a try-catch handler in loop that keeps on retrying if delivery fails. Is this a good idea? If not,...
by: Brian Bischof | last post by:
In my Win app I found that using the SMTP object doesn't release resources after closing the application. During testing I have to open and close the app many times and I found that after about three times it locks up when I call the Send() method and returns the error "Could not access CDO.Message Object". I found that if I create a new Win App...
by: antonyliu2002 | last post by:
I've set up the virtual smtp server on my IIS 5.1 like so: 1. Assign IP address to "All Unassigned", and listen to port 25. 2. Access Connection granted to "". 3. Relay only allow "". 4. Authentication: "Anonymous access" only. 5. Outbound connection listen to TCP 25. Besides,
by: oopsbabies | last post by:
Hello everyone, I am using Apache 1.3.33 as the web server and PHP version 4.3.10. My machine is using Windows XP 2002 professional edition which comes with a Windows firewall. I am using McAfee free edition for anti-virus. I use an ISP provider from my country and according to them I do not need to perform authentication while sending...
by: =?Utf-8?B?QWRl?= | last post by:
HI All, I am encountering the following error when I try to send an email through a SMTP server. I believe the problem lies with the authentication part when the network crednetials are used, error is thrown at the .send point. Error is: The following error occured Sending an email: System.ApplicationException: An error occurred sending...
by: pbmods | last post by:
I feel almost embarrassed to post in this forum, but I can't exactly pick my clients' technologies, so here we are. I'm supporting a client project written in ASP. Part of the project that doesn't work is a form mailer. Here's what's up: We have some code that looks like this: set smtp = Server.CreateObject("Bamboo.SMTP") smtp.Server...
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. ...
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that...
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For...
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then...
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes...
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert...
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in...
by: adsilva | last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.