473,883 Members | 1,688 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

If statement, with multiple options

I currently have a button once clicked, invokes the following:

If Address_Select = -1 Then
Forms!ProspectF orm!Address = [Address]
End If

However, there are 11 other fields in the subform that i'd like to be
included. However, when I did this:

If Address_Select = -1 Then
Forms!ProspectF orm!Address = [Address]
End If
If City_Select = -1 Then
Forms!ProspectF orm!City = [City]
End If
If ST_Select = -1 Then
Forms!ProspectF orm!State = [ST]
End If
If ZipCode_Select = -1 Then
Forms!ProspectF orm!ZipCode = [ZipCode]
End If
If Zip4_Select = -1 Then
Forms!ProspectF orm!Zip4 = [Zip4]
End If
If MSA_Select = -1 Then
Forms!ProspectF orm!MSA = [MSA]
End If
If Phone_Select = -1 Then
Forms!ProspectF orm!Phone = [Phone]
End If
If FaxPhone_Select = -1 Then
Forms!ProspectF orm!Fax = [Fax Phone]
End If
If TickerSymbol_Se lect = -1 Then
Forms!ProspectF orm!TickerSymbo l = [TICKER SYMBOL]
End If
If StockExchangeCo de_Select = -1 Then
Forms!ProspectF orm!StockExchan geCode = [STOCK EXCHANGE CODE]
End If

It didn't work. What am I doing wrong?

PS - I should say, as long as only one of them is checked, it will
work. But if I check all, then hit my button, it won't do it.

Nov 6 '07 #1
7 2584
On Nov 6, 12:40 pm, magmike <magmi...@yahoo .comwrote:
I currently have a button once clicked, invokes the following:

If Address_Select = -1 Then
Forms!ProspectF orm!Address = [Address]
End If

However, there are 11 other fields in the subform that i'd like to be
included. However, when I did this:

If Address_Select = -1 Then
Forms!ProspectF orm!Address = [Address]
End If
If City_Select = -1 Then
Forms!ProspectF orm!City = [City]
End If
If ST_Select = -1 Then
Forms!ProspectF orm!State = [ST]
End If
If ZipCode_Select = -1 Then
Forms!ProspectF orm!ZipCode = [ZipCode]
End If
If Zip4_Select = -1 Then
Forms!ProspectF orm!Zip4 = [Zip4]
End If
If MSA_Select = -1 Then
Forms!ProspectF orm!MSA = [MSA]
End If
If Phone_Select = -1 Then
Forms!ProspectF orm!Phone = [Phone]
End If
If FaxPhone_Select = -1 Then
Forms!ProspectF orm!Fax = [Fax Phone]
End If
If TickerSymbol_Se lect = -1 Then
Forms!ProspectF orm!TickerSymbo l = [TICKER SYMBOL]
End If
If StockExchangeCo de_Select = -1 Then
Forms!ProspectF orm!StockExchan geCode = [STOCK EXCHANGE CODE]
End If

It didn't work. What am I doing wrong?

PS - I should say, as long as only one of them is checked, it will
work. But if I check all, then hit my button, it won't do it.
I don't see anything obvious wrong with your code, except that I am
baffled as to what you are trying to do. Are you allowing the user to
select which fields appear on a form or report? Is
StockExchangeCo de_Select (for example) a checkbox on the same form?
Is StockExchangeCo de a textbox? Or are you trying to create some kind
of filter?

Nov 6 '07 #2
On Nov 6, 1:41 pm, OldPro <rrossk...@sbcg lobal.netwrote:
On Nov 6, 12:40 pm, magmike <magmi...@yahoo .comwrote:


I currently have a button once clicked, invokes the following:
If Address_Select = -1 Then
Forms!ProspectF orm!Address = [Address]
End If
However, there are 11 other fields in the subform that i'd like to be
included. However, when I did this:
If Address_Select = -1 Then
Forms!ProspectF orm!Address = [Address]
End If
If City_Select = -1 Then
Forms!ProspectF orm!City = [City]
End If
If ST_Select = -1 Then
Forms!ProspectF orm!State = [ST]
End If
If ZipCode_Select = -1 Then
Forms!ProspectF orm!ZipCode = [ZipCode]
End If
If Zip4_Select = -1 Then
Forms!ProspectF orm!Zip4 = [Zip4]
End If
If MSA_Select = -1 Then
Forms!ProspectF orm!MSA = [MSA]
End If
If Phone_Select = -1 Then
Forms!ProspectF orm!Phone = [Phone]
End If
If FaxPhone_Select = -1 Then
Forms!ProspectF orm!Fax = [Fax Phone]
End If
If TickerSymbol_Se lect = -1 Then
Forms!ProspectF orm!TickerSymbo l = [TICKER SYMBOL]
End If
If StockExchangeCo de_Select = -1 Then
Forms!ProspectF orm!StockExchan geCode = [STOCK EXCHANGE CODE]
End If
It didn't work. What am I doing wrong?
PS - I should say, as long as only one of them is checked, it will
work. But if I check all, then hit my button, it won't do it.

I don't see anything obvious wrong with your code, except that I am
baffled as to what you are trying to do. Are you allowing the user to
select which fields appear on a form or report? Is
StockExchangeCo de_Select (for example) a checkbox on the same form?
Is StockExchangeCo de a textbox? Or are you trying to create some kind
of filter?- Hide quoted text -

- Show quoted text -
the fields named select, are check boxes for the similarly named text
box. I am trying to update the values of the main form, with the
values of the subform, which come from separate sources. I don't
always want all the fields to update though. I'd like to be able to
select which fields in each instance get copied over.

Thanks!

Nov 6 '07 #3
magmike wrote:
I currently have a button once clicked, invokes the following:

If Address_Select = -1 Then
Forms!ProspectF orm!Address = [Address]
End If

However, there are 11 other fields in the subform that i'd like to be
included. However, when I did this:

If Address_Select = -1 Then
Forms!ProspectF orm!Address = [Address]
End If
If City_Select = -1 Then
Forms!ProspectF orm!City = [City]
End If
If ST_Select = -1 Then
Forms!ProspectF orm!State = [ST]
End If
If ZipCode_Select = -1 Then
Forms!ProspectF orm!ZipCode = [ZipCode]
End If
If Zip4_Select = -1 Then
Forms!ProspectF orm!Zip4 = [Zip4]
End If
If MSA_Select = -1 Then
Forms!ProspectF orm!MSA = [MSA]
End If
If Phone_Select = -1 Then
Forms!ProspectF orm!Phone = [Phone]
End If
If FaxPhone_Select = -1 Then
Forms!ProspectF orm!Fax = [Fax Phone]
End If
If TickerSymbol_Se lect = -1 Then
Forms!ProspectF orm!TickerSymbo l = [TICKER SYMBOL]
End If
If StockExchangeCo de_Select = -1 Then
Forms!ProspectF orm!StockExchan geCode = [STOCK EXCHANGE CODE]
End If

It didn't work. What am I doing wrong?

PS - I should say, as long as only one of them is checked, it will
work. But if I check all, then hit my button, it won't do it.
Does it run but not work? Or do you get an error.

On your StockExchangeCo de line you could move the next line onto the
same line...otherwis e you might want an EndIF

If you open your code window and click on the left hand vertical bar
next to "If Address_Select = -1 Then" line, you can step through the
code when you run the process.

Nov 6 '07 #4
On Nov 6, 1:46 pm, Salad <o...@vinegar.c omwrote:
magmike wrote:
I currently have a button once clicked, invokes the following:
If Address_Select = -1 Then
Forms!ProspectF orm!Address = [Address]
End If
However, there are 11 other fields in the subform that i'd like to be
included. However, when I did this:
If Address_Select = -1 Then
Forms!ProspectF orm!Address = [Address]
End If
If City_Select = -1 Then
Forms!ProspectF orm!City = [City]
End If
If ST_Select = -1 Then
Forms!ProspectF orm!State = [ST]
End If
If ZipCode_Select = -1 Then
Forms!ProspectF orm!ZipCode = [ZipCode]
End If
If Zip4_Select = -1 Then
Forms!ProspectF orm!Zip4 = [Zip4]
End If
If MSA_Select = -1 Then
Forms!ProspectF orm!MSA = [MSA]
End If
If Phone_Select = -1 Then
Forms!ProspectF orm!Phone = [Phone]
End If
If FaxPhone_Select = -1 Then
Forms!ProspectF orm!Fax = [Fax Phone]
End If
If TickerSymbol_Se lect = -1 Then
Forms!ProspectF orm!TickerSymbo l = [TICKER SYMBOL]
End If
If StockExchangeCo de_Select = -1 Then
Forms!ProspectF orm!StockExchan geCode = [STOCK EXCHANGE CODE]
End If
It didn't work. What am I doing wrong?
PS - I should say, as long as only one of them is checked, it will
work. But if I check all, then hit my button, it won't do it.

Does it run but not work? Or do you get an error.

On your StockExchangeCo de line you could move the next line onto the
same line...otherwis e you might want an EndIF

If you open your code window and click on the left hand vertical bar
next to "If Address_Select = -1 Then" line, you can step through the
code when you run the process.- Hide quoted text -

- Show quoted text -
No errors. it just works one line at a time.
Once it updates one line. I have to uncheck it, the check another,
then push the button again. It's a lot of check, unchecking and button
pushing. I just want it to work once.

On the stock exchange line, I'm not sure what you mean. Could you show
me?

Nov 6 '07 #5
On Nov 6, 1:30 pm, magmike <magmi...@yahoo .comwrote:
On Nov 6, 1:46 pm, Salad <o...@vinegar.c omwrote:


magmike wrote:
I currently have a button once clicked, invokes the following:
If Address_Select = -1 Then
Forms!ProspectF orm!Address = [Address]
End If
However, there are 11 other fields in the subform that i'd like to be
included. However, when I did this:
If Address_Select = -1 Then
Forms!ProspectF orm!Address = [Address]
End If
If City_Select = -1 Then
Forms!ProspectF orm!City = [City]
End If
If ST_Select = -1 Then
Forms!ProspectF orm!State = [ST]
End If
If ZipCode_Select = -1 Then
Forms!ProspectF orm!ZipCode = [ZipCode]
End If
If Zip4_Select = -1 Then
Forms!ProspectF orm!Zip4 = [Zip4]
End If
If MSA_Select = -1 Then
Forms!ProspectF orm!MSA = [MSA]
End If
If Phone_Select = -1 Then
Forms!ProspectF orm!Phone = [Phone]
End If
If FaxPhone_Select = -1 Then
Forms!ProspectF orm!Fax = [Fax Phone]
End If
If TickerSymbol_Se lect = -1 Then
Forms!ProspectF orm!TickerSymbo l = [TICKER SYMBOL]
End If
If StockExchangeCo de_Select = -1 Then
Forms!ProspectF orm!StockExchan geCode = [STOCK EXCHANGE CODE]
End If
It didn't work. What am I doing wrong?
PS - I should say, as long as only one of them is checked, it will
work. But if I check all, then hit my button, it won't do it.
Does it run but not work? Or do you get an error.
On your StockExchangeCo de line you could move the next line onto the
same line...otherwis e you might want an EndIF
If you open your code window and click on the left hand vertical bar
next to "If Address_Select = -1 Then" line, you can step through the
code when you run the process.- Hide quoted text -
- Show quoted text -

No errors. it just works one line at a time.
Once it updates one line. I have to uncheck it, the check another,
then push the button again. It's a lot of check, unchecking and button
pushing. I just want it to work once.

On the stock exchange line, I'm not sure what you mean. Could you show
me?- Hide quoted text -

- Show quoted text -
Is there more code than this? If so, please post the full code so we
can truly see what's going on. I am confused because you aren't using
full references to fields.

Perhaps this would work (each IF is a single line):
If Me!Address_Sele ct Then Forms!ProspectF orm!Address = Me![Address]
If Me!City_Select Then Forms!ProspectF orm!City = Me![City]
If Me!ST_Select Then Forms!ProspectF orm!State = Me![ST]
If Me!ZipCode_Sele ct Then Forms!ProspectF orm!ZipCode = Me![ZipCode]
If Me!Zip4_Select Then Forms!ProspectF orm!Zip4 = Me![Zip4]
If Me!MSA_Select Then Forms!ProspectF orm!MSA = Me![MSA]
If Me!Phone_Select Then Forms!ProspectF orm!Phone = Me![Phone]
If Me!FaxPhone_Sel ect Then Forms!ProspectF orm!Fax = Me![Fax Phone]
If Me!TickerSymbol _Select Then Forms!ProspectF orm!TickerSymbo l = Me!
[TICKER SYMBOL]
If Me!StockExchang eCode_Select Then Forms!ProspectF orm!
StockExchangeCo de = Me![STOCK EXCHANGE CODE]

Because the Select fields are CheckBoxes, they already have a True/
False value, so you don't need the =-1 part of your logical test.
This means that if your checkbox is checked, your statement is
evaluated as: If True then do this. To save yourself some typing, you
only need to use the block form of the IF statement if you're
executing more than one command. So you can have your IF all on one
line and exclude the End If part of the statement.

Block Form:
If Logical Test = True Then
Do Something Here
End If

Single-Line Form:
If Logical Test = True Then Do Something Here

HTH,
Jana

Nov 6 '07 #6
On Nov 6, 3:06 pm, Jana <Bauer.J...@gma il.comwrote:
On Nov 6, 1:30 pm, magmike <magmi...@yahoo .comwrote:


On Nov 6, 1:46 pm, Salad <o...@vinegar.c omwrote:
magmike wrote:
I currently have a button once clicked, invokes the following:
If Address_Select = -1 Then
Forms!ProspectF orm!Address = [Address]
End If
However, there are 11 other fields in the subform that i'd like to be
included. However, when I did this:
If Address_Select = -1 Then
Forms!ProspectF orm!Address = [Address]
End If
If City_Select = -1 Then
Forms!ProspectF orm!City = [City]
End If
If ST_Select = -1 Then
Forms!ProspectF orm!State = [ST]
End If
If ZipCode_Select = -1 Then
Forms!ProspectF orm!ZipCode = [ZipCode]
End If
If Zip4_Select = -1 Then
Forms!ProspectF orm!Zip4 = [Zip4]
End If
If MSA_Select = -1 Then
Forms!ProspectF orm!MSA = [MSA]
End If
If Phone_Select = -1 Then
Forms!ProspectF orm!Phone = [Phone]
End If
If FaxPhone_Select = -1 Then
Forms!ProspectF orm!Fax = [Fax Phone]
End If
If TickerSymbol_Se lect = -1 Then
Forms!ProspectF orm!TickerSymbo l = [TICKER SYMBOL]
End If
If StockExchangeCo de_Select = -1 Then
Forms!ProspectF orm!StockExchan geCode = [STOCK EXCHANGE CODE]
End If
It didn't work. What am I doing wrong?
PS - I should say, as long as only one of them is checked, it will
work. But if I check all, then hit my button, it won't do it.
Does it run but not work? Or do you get an error.
On your StockExchangeCo de line you could move the next line onto the
same line...otherwis e you might want an EndIF
If you open your code window and click on the left hand vertical bar
next to "If Address_Select = -1 Then" line, you can step through the
code when you run the process.- Hide quoted text -
- Show quoted text -
No errors. it just works one line at a time.
Once it updates one line. I have to uncheck it, the check another,
then push the button again. It's a lot of check, unchecking and button
pushing. I just want it to work once.
On the stock exchange line, I'm not sure what you mean. Could you show
me?- Hide quoted text -
- Show quoted text -

Is there more code than this? If so, please post the full code so we
can truly see what's going on. I am confused because you aren't using
full references to fields.

Perhaps this would work (each IF is a single line):
If Me!Address_Sele ct Then Forms!ProspectF orm!Address = Me![Address]
If Me!City_Select Then Forms!ProspectF orm!City = Me![City]
If Me!ST_Select Then Forms!ProspectF orm!State = Me![ST]
If Me!ZipCode_Sele ct Then Forms!ProspectF orm!ZipCode = Me![ZipCode]
If Me!Zip4_Select Then Forms!ProspectF orm!Zip4 = Me![Zip4]
If Me!MSA_Select Then Forms!ProspectF orm!MSA = Me![MSA]
If Me!Phone_Select Then Forms!ProspectF orm!Phone = Me![Phone]
If Me!FaxPhone_Sel ect Then Forms!ProspectF orm!Fax = Me![Fax Phone]
If Me!TickerSymbol _Select Then Forms!ProspectF orm!TickerSymbo l = Me!
[TICKER SYMBOL]
If Me!StockExchang eCode_Select Then Forms!ProspectF orm!
StockExchangeCo de = Me![STOCK EXCHANGE CODE]

Because the Select fields are CheckBoxes, they already have a True/
False value, so you don't need the =-1 part of your logical test.
This means that if your checkbox is checked, your statement is
evaluated as: If True then do this. To save yourself some typing, you
only need to use the block form of the IF statement if you're
executing more than one command. So you can have your IF all on one
line and exclude the End If part of the statement.

Block Form:
If Logical Test = True Then
Do Something Here
End If

Single-Line Form:
If Logical Test = True Then Do Something Here

HTH,
Jana- Hide quoted text -

- Show quoted text -
That did, thanks! No there wasn't any other code. But for some reason,
it works perfect with the line version. Thanks a million!

I assume, that if I wanted to insert data straight into the table from
the subform, it would look like this:

If Me!Address_Sele ct Then Table!ProspectT able!Address = Me![Address]
WHERE Table!ProspectT able!ID = Me!Forms!Prospe ctForm!ID

?

Nov 6 '07 #7
On Nov 6, 3:23 pm, magmike <magmi...@yahoo .comwrote:
On Nov 6, 3:06 pm, Jana <Bauer.J...@gma il.comwrote:


On Nov 6, 1:30 pm, magmike <magmi...@yahoo .comwrote:
On Nov 6, 1:46 pm, Salad <o...@vinegar.c omwrote:
magmike wrote:
I currently have a button once clicked, invokes the following:
If Address_Select = -1 Then
Forms!ProspectF orm!Address = [Address]
End If
However, there are 11 other fields in the subform that i'd like to be
included. However, when I did this:
If Address_Select = -1 Then
Forms!ProspectF orm!Address = [Address]
End If
If City_Select = -1 Then
Forms!ProspectF orm!City = [City]
End If
If ST_Select = -1 Then
Forms!ProspectF orm!State = [ST]
End If
If ZipCode_Select = -1 Then
Forms!ProspectF orm!ZipCode = [ZipCode]
End If
If Zip4_Select = -1 Then
Forms!ProspectF orm!Zip4 = [Zip4]
End If
If MSA_Select = -1 Then
Forms!ProspectF orm!MSA = [MSA]
End If
If Phone_Select = -1 Then
Forms!ProspectF orm!Phone = [Phone]
End If
If FaxPhone_Select = -1 Then
Forms!ProspectF orm!Fax = [Fax Phone]
End If
If TickerSymbol_Se lect = -1 Then
Forms!ProspectF orm!TickerSymbo l = [TICKER SYMBOL]
End If
If StockExchangeCo de_Select = -1 Then
Forms!ProspectF orm!StockExchan geCode = [STOCK EXCHANGE CODE]
End If
It didn't work. What am I doing wrong?
PS - I should say, as long as only one of them is checked, it will
work. But if I check all, then hit my button, it won't do it.
Does it run but not work? Or do you get an error.
On your StockExchangeCo de line you could move the next line onto the
same line...otherwis e you might want an EndIF
If you open your code window and click on the left hand vertical bar
next to "If Address_Select = -1 Then" line, you can step through the
code when you run the process.- Hide quoted text -
- Show quoted text -
No errors. it just works one line at a time.
Once it updates one line. I have to uncheck it, the check another,
then push the button again. It's a lot of check, unchecking and button
pushing. I just want it to work once.
On the stock exchange line, I'm not sure what you mean. Could you show
me?- Hide quoted text -
- Show quoted text -
Is there more code than this? If so, please post the full code so we
can truly see what's going on. I am confused because you aren't using
full references to fields.
Perhaps this would work (each IF is a single line):
If Me!Address_Sele ct Then Forms!ProspectF orm!Address = Me![Address]
If Me!City_Select Then Forms!ProspectF orm!City = Me![City]
If Me!ST_Select Then Forms!ProspectF orm!State = Me![ST]
If Me!ZipCode_Sele ct Then Forms!ProspectF orm!ZipCode = Me![ZipCode]
If Me!Zip4_Select Then Forms!ProspectF orm!Zip4 = Me![Zip4]
If Me!MSA_Select Then Forms!ProspectF orm!MSA = Me![MSA]
If Me!Phone_Select Then Forms!ProspectF orm!Phone = Me![Phone]
If Me!FaxPhone_Sel ect Then Forms!ProspectF orm!Fax = Me![Fax Phone]
If Me!TickerSymbol _Select Then Forms!ProspectF orm!TickerSymbo l = Me!
[TICKER SYMBOL]
If Me!StockExchang eCode_Select Then Forms!ProspectF orm!
StockExchangeCo de = Me![STOCK EXCHANGE CODE]
Because the Select fields are CheckBoxes, they already have a True/
False value, so you don't need the =-1 part of your logical test.
This means that if your checkbox is checked, your statement is
evaluated as: If True then do this. To save yourself some typing, you
only need to use the block form of the IF statement if you're
executing more than one command. So you can have your IF all on one
line and exclude the End If part of the statement.
Block Form:
If Logical Test = True Then
Do Something Here
End If
Single-Line Form:
If Logical Test = True Then Do Something Here
HTH,
Jana- Hide quoted text -
- Show quoted text -

That did, thanks! No there wasn't any other code. But for some reason,
it works perfect with the line version. Thanks a million!

I assume, that if I wanted to insert data straight into the table from
the subform, it would look like this:

If Me!Address_Sele ct Then Table!ProspectT able!Address = Me![Address]
WHERE Table!ProspectT able!ID = Me!Forms!Prospe ctForm!ID

?- Hide quoted text -

- Show quoted text -
Mike:
The Me! additions are probably what did it, as that references the
current form you are on. I have never updated a table like that, so
I'm not sure if that will work...make a backup copy, and give it a
shot!

Glad I could help,
Jana

Nov 6 '07 #8

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

5
3884
by: Dennis M. Marks | last post by:
Please look at page http://www.dcs-chico.com/~denmarks/amtrak.html I am trying to change the color of the first dropdown menu but everything that I have tried has no effect. If I put the style in the select statement the color only applies to the undroppeddown menu. When opened the color disappears. In the option statement it has no effect. I have tried IE and Netscape on a Mac.
3
3041
by: Max Weber | last post by:
Try to run the code below in a page. You will notice than when you switch the multiple attribute of the SELECT tag, only one option is displayed as selected although multiple options have ben created as selected. May somebody give me an explanation ? <input type="button" value="test" onclick="test()"/> <select name="tagSelect" style="width:100%"> </select>
1
1835
by: d.schulz81 | last post by:
Holas, I want to do the following: If one entry in multiple select "domain" is selected, i want to change the content in dropdown "typ" dynamically according to the selected domain. If more than one entries in domain are selected, i want the dropdown typ to disappear
6
7263
by: Adam Tilghman | last post by:
Hi all, I have found that IE doesn't seem to respect the <SELECT> "multiple" attribute when set using DOM methods, although the attribute/property seems to exist and is updated properly. Those changes just don't make it onto the screen. Am I doing something wrong here? If not, is there a better feature test I can use than "appName.match()"?
2
3671
by: areef.islam | last post by:
Hi, I am kinda new to javascript and I am having this problem with selecting multiple options from a select tag. Hope someone can help me out here. here is my code /////////////////////////////////////////////////////////////////////////////////////// <form action="whatever.php" method="post"> <select name="zip_code" onchange="makeRequest('getCity.php?state='+this.form.zip_code.options.value)" multiple="multiple" size="20">
3
12562
by: imrantbd | last post by:
This is my first problem.Please help me. I have the following code: <head> <script language="JavaScript"> function addSrcToDestList() { destList1 = window.document.forms.destList; srcList = window.document.forms.srcList;
3
8724
by: imrantbd | last post by:
I need array type name like "destList" must use for my destlist select box,not a single name.Or need a solution to capture multiple value of "destList" select box and send all selected value in php page.The multiple select value then insert in database added by comma.The following is my code: Form Page:form.php <head> <script language="JavaScript"> function addSrcToDestList() { destList1 = window.document.forms.destList; srcList...
2
9440
by: rn5a | last post by:
In a ASP applicatiuon, the FOrm has a textbox & a select list where the admin can select multiple options. Basically the admin has to enter the name of a new coach in the textbox & select the soccer clubs which he will be coaching; thus he can select only one soccer club for a new coach or multiple soccer clubs. This is how I am trying it: When this Form will be submitted, the new coaches name will be inserted in a MS-Access DB table...
25
5422
by: bonneylake | last post by:
Hey Everyone, Well i am not sure if my question needs to be here or in coldfusion. If i have my question is in the wrong section i am sorry in advance an will move it to the correct section. Basically i have a multiple select box. An it works except for this one part i want to add to it.The first box i have is called project members which shows the users you can choose to send an email to and the other box is called assignees which is the...
5
1877
by: tomaz | last post by:
hi everybody i've been searching a clean and correct way to use very long if statements. multiple options: if (cond1 && cond2 && (cond3 && cond4) && (cond5 || cond6) { // do this }
0
9942
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
0
10416
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
0
9574
agi2029
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own.... Now, this would greatly impact the work of software developers. The idea...
1
7971
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
0
7129
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...
0
5797
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
1
4612
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
2
4220
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.
3
3233
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.