473,698 Members | 2,972 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

VBA to set Source Object for a subreport

I have a report with a subreport. The source object for this subreport
varies according to the value of a field in a table. I am trying to
programmaticall y set the object source for the subreport as part of the
detail format section of the report. I have been playing around with things
like:

Me.SubReport.So urceObject = Report.sub5O5L

but nothing seems to work. Can I achieve what I want to do and if so, can
anyone give me the syntax I need to reset the source object of a subreport.

dixie
Nov 12 '05 #1
8 13259
Just set the SourceObject property to the name of your subreport:

Me.SubReport.So urceObject="sub 505L"

Don't forget to reset your LinkMasterField s and LinkChildFields properties
after you change the SourceObject property.

HTH
- Turtle

"dixie" <di****@dogmail .com> wrote in message
news:zA******** *******@nnrp1.o zemail.com.au.. .
I have a report with a subreport. The source object for this subreport
varies according to the value of a field in a table. I am trying to
programmaticall y set the object source for the subreport as part of the
detail format section of the report. I have been playing around with things like:

Me.SubReport.So urceObject = Report.sub5O5L

but nothing seems to work. Can I achieve what I want to do and if so, can
anyone give me the syntax I need to reset the source object of a subreport.
dixie

Nov 12 '05 #2
OK, I was so close - didn't put the quote marks in. However, I've just
tried this and I get error 2199 - You cant set the source object property
after printing has started. The code was in the Detail_Format section. I
guess I can try to do it in the open event. Whoops can't go there either.
Any ideas? The code I have now is:

If [PrintType] = "05W04" Then
Me.SubOutcomes. SourceObject = "sub5O5L"
Me.SubOutcomes. LinkMasterField s = "EntryNumbe r"
Me.SubOutcomes. LinkChildFields = "EntryNumbe r"
End If

But, I can't find the event to run it in - I have tried most possibilities.

dixie

"MacDermott " <ma********@nos pam.com> wrote in message
news:Zk******** ***********@new sread3.news.atl .earthlink.net. ..
Just set the SourceObject property to the name of your subreport:

Me.SubReport.So urceObject="sub 505L"

Don't forget to reset your LinkMasterField s and LinkChildFields properties
after you change the SourceObject property.

HTH
- Turtle

"dixie" <di****@dogmail .com> wrote in message
news:zA******** *******@nnrp1.o zemail.com.au.. .
I have a report with a subreport. The source object for this subreport
varies according to the value of a field in a table. I am trying to
programmaticall y set the object source for the subreport as part of the
detail format section of the report. I have been playing around with

things
like:

Me.SubReport.So urceObject = Report.sub5O5L

but nothing seems to work. Can I achieve what I want to do and if so, can anyone give me the syntax I need to reset the source object of a

subreport.

dixie


Nov 12 '05 #3
Sorry -
I had overlooked the fact that you were using a report, not a form.

It looks as if you want to be able to show different subreports for
different records.
One work-around for this problem would be to put both subreports on the
report in design view (on top of each other). Be sure you set their CanGrow
and CanShrink properties to True.
Then in your Detail_Format event procedure, you can make the one you want
visible and the other invisible.

This may run more slowly, but it should give you the result you want.

HTH
- Turtle

"dixie" <di****@dogmail .com> wrote in message
news:1C******** ********@nnrp1. ozemail.com.au. ..
OK, I was so close - didn't put the quote marks in. However, I've just
tried this and I get error 2199 - You cant set the source object property
after printing has started. The code was in the Detail_Format section. I
guess I can try to do it in the open event. Whoops can't go there either.
Any ideas? The code I have now is:

If [PrintType] = "05W04" Then
Me.SubOutcomes. SourceObject = "sub5O5L"
Me.SubOutcomes. LinkMasterField s = "EntryNumbe r"
Me.SubOutcomes. LinkChildFields = "EntryNumbe r"
End If

But, I can't find the event to run it in - I have tried most possibilities.
dixie

"MacDermott " <ma********@nos pam.com> wrote in message
news:Zk******** ***********@new sread3.news.atl .earthlink.net. ..
Just set the SourceObject property to the name of your subreport:

Me.SubReport.So urceObject="sub 505L"

Don't forget to reset your LinkMasterField s and LinkChildFields properties
after you change the SourceObject property.

HTH
- Turtle

"dixie" <di****@dogmail .com> wrote in message
news:zA******** *******@nnrp1.o zemail.com.au.. .
I have a report with a subreport. The source object for this subreport varies according to the value of a field in a table. I am trying to
programmaticall y set the object source for the subreport as part of the detail format section of the report. I have been playing around with

things
like:

Me.SubReport.So urceObject = Report.sub5O5L

but nothing seems to work. Can I achieve what I want to do and if so,

can anyone give me the syntax I need to reset the source object of a

subreport.

dixie



Nov 12 '05 #4
Actually, that is how I currently do it, but there are 11 subreports, and
even though only one is visible at a time for each record, the other 10
populate with data and it makes the printing of the reports a very memory
intensive and slow procedure. I was hoping to use this method to just swap
each subreport in and out of the main report to speed things up. Oh well,
it seemed like a good idea at the time. Thanks anyway Turtle.

dixie

"MacDermott " <ma********@nos pam.com> wrote in message
news:5o******** *********@newsr ead1.news.atl.e arthlink.net...
Sorry -
I had overlooked the fact that you were using a report, not a form.

It looks as if you want to be able to show different subreports for
different records.
One work-around for this problem would be to put both subreports on the
report in design view (on top of each other). Be sure you set their CanGrow and CanShrink properties to True.
Then in your Detail_Format event procedure, you can make the one you want
visible and the other invisible.

This may run more slowly, but it should give you the result you want.

HTH
- Turtle

"dixie" <di****@dogmail .com> wrote in message
news:1C******** ********@nnrp1. ozemail.com.au. ..
OK, I was so close - didn't put the quote marks in. However, I've just
tried this and I get error 2199 - You cant set the source object property
after printing has started. The code was in the Detail_Format section. I guess I can try to do it in the open event. Whoops can't go there either. Any ideas? The code I have now is:

If [PrintType] = "05W04" Then
Me.SubOutcomes. SourceObject = "sub5O5L"
Me.SubOutcomes. LinkMasterField s = "EntryNumbe r"
Me.SubOutcomes. LinkChildFields = "EntryNumbe r"
End If

But, I can't find the event to run it in - I have tried most

possibilities.

dixie

"MacDermott " <ma********@nos pam.com> wrote in message
news:Zk******** ***********@new sread3.news.atl .earthlink.net. ..
Just set the SourceObject property to the name of your subreport:

Me.SubReport.So urceObject="sub 505L"

Don't forget to reset your LinkMasterField s and LinkChildFields properties after you change the SourceObject property.

HTH
- Turtle

"dixie" <di****@dogmail .com> wrote in message
news:zA******** *******@nnrp1.o zemail.com.au.. .
> I have a report with a subreport. The source object for this subreport > varies according to the value of a field in a table. I am trying to
> programmaticall y set the object source for the subreport as part of the > detail format section of the report. I have been playing around with things
> like:
>
> Me.SubReport.So urceObject = Report.sub5O5L
>
> but nothing seems to work. Can I achieve what I want to do and if

so, can
> anyone give me the syntax I need to reset the source object of a
subreport.
>
> dixie
>
>



Nov 12 '05 #5
What about this idea. Can I copy a subreport to a new name (which would be
a generic one in the report) for a record, then delete it and copy another
subreport to the same name for the next report, etc.? Just asking for an
opinion.

I have played around with this for a while, but the problem was that I can
rename the report to the generic subreport name, but then, I can't delete
the renamed report for the next renaming because it is being held open by
the report on which it is a subreport.

dixie

"MacDermott " <ma********@nos pam.com> wrote in message
news:5o******** *********@newsr ead1.news.atl.e arthlink.net...
Sorry -
I had overlooked the fact that you were using a report, not a form.

It looks as if you want to be able to show different subreports for
different records.
One work-around for this problem would be to put both subreports on the
report in design view (on top of each other). Be sure you set their CanGrow and CanShrink properties to True.
Then in your Detail_Format event procedure, you can make the one you want
visible and the other invisible.

This may run more slowly, but it should give you the result you want.

HTH
- Turtle

"dixie" <di****@dogmail .com> wrote in message
news:1C******** ********@nnrp1. ozemail.com.au. ..
OK, I was so close - didn't put the quote marks in. However, I've just
tried this and I get error 2199 - You cant set the source object property
after printing has started. The code was in the Detail_Format section. I guess I can try to do it in the open event. Whoops can't go there either. Any ideas? The code I have now is:

If [PrintType] = "05W04" Then
Me.SubOutcomes. SourceObject = "sub5O5L"
Me.SubOutcomes. LinkMasterField s = "EntryNumbe r"
Me.SubOutcomes. LinkChildFields = "EntryNumbe r"
End If

But, I can't find the event to run it in - I have tried most

possibilities.

dixie

"MacDermott " <ma********@nos pam.com> wrote in message
news:Zk******** ***********@new sread3.news.atl .earthlink.net. ..
Just set the SourceObject property to the name of your subreport:

Me.SubReport.So urceObject="sub 505L"

Don't forget to reset your LinkMasterField s and LinkChildFields properties after you change the SourceObject property.

HTH
- Turtle

"dixie" <di****@dogmail .com> wrote in message
news:zA******** *******@nnrp1.o zemail.com.au.. .
> I have a report with a subreport. The source object for this subreport > varies according to the value of a field in a table. I am trying to
> programmaticall y set the object source for the subreport as part of the > detail format section of the report. I have been playing around with things
> like:
>
> Me.SubReport.So urceObject = Report.sub5O5L
>
> but nothing seems to work. Can I achieve what I want to do and if

so, can
> anyone give me the syntax I need to reset the source object of a
subreport.
>
> dixie
>
>




Nov 12 '05 #6
I would tend to agree that this won't work well.

How different are the subreports?

- Turtle

"dixie" <di****@dogmail .com> wrote in message
news:hP******** *********@nnrp1 .ozemail.com.au ...
What about this idea. Can I copy a subreport to a new name (which would be a generic one in the report) for a record, then delete it and copy another
subreport to the same name for the next report, etc.? Just asking for an
opinion.

I have played around with this for a while, but the problem was that I can
rename the report to the generic subreport name, but then, I can't delete
the renamed report for the next renaming because it is being held open by
the report on which it is a subreport.

dixie

"MacDermott " <ma********@nos pam.com> wrote in message
news:5o******** *********@newsr ead1.news.atl.e arthlink.net...
Sorry -
I had overlooked the fact that you were using a report, not a form.

It looks as if you want to be able to show different subreports for
different records.
One work-around for this problem would be to put both subreports on the
report in design view (on top of each other). Be sure you set their CanGrow
and CanShrink properties to True.
Then in your Detail_Format event procedure, you can make the one you want
visible and the other invisible.

This may run more slowly, but it should give you the result you want.

HTH
- Turtle

"dixie" <di****@dogmail .com> wrote in message
news:1C******** ********@nnrp1. ozemail.com.au. ..
OK, I was so close - didn't put the quote marks in. However, I've just tried this and I get error 2199 - You cant set the source object property after printing has started. The code was in the Detail_Format section. I
guess I can try to do it in the open event. Whoops can't go there either. Any ideas? The code I have now is:

If [PrintType] = "05W04" Then
Me.SubOutcomes. SourceObject = "sub5O5L"
Me.SubOutcomes. LinkMasterField s = "EntryNumbe r"
Me.SubOutcomes. LinkChildFields = "EntryNumbe r"
End If

But, I can't find the event to run it in - I have tried most

possibilities.

dixie

"MacDermott " <ma********@nos pam.com> wrote in message
news:Zk******** ***********@new sread3.news.atl .earthlink.net. ..
> Just set the SourceObject property to the name of your subreport:
>
> Me.SubReport.So urceObject="sub 505L"
>
> Don't forget to reset your LinkMasterField s and LinkChildFields

properties
> after you change the SourceObject property.
>
> HTH
> - Turtle
>
> "dixie" <di****@dogmail .com> wrote in message
> news:zA******** *******@nnrp1.o zemail.com.au.. .
> > I have a report with a subreport. The source object for this

subreport
> > varies according to the value of a field in a table. I am trying
to > > programmaticall y set the object source for the subreport as part

of the
> > detail format section of the report. I have been playing around

with > things
> > like:
> >
> > Me.SubReport.So urceObject = Report.sub5O5L
> >
> > but nothing seems to work. Can I achieve what I want to do and if so, can
> > anyone give me the syntax I need to reset the source object of a
> subreport.
> >
> > dixie
> >
> >
>
>



Nov 12 '05 #7
I know I didn't word that last message very well, but I think you get the
gist of it. The idea was to have only one generically named subreport and
then to delete it and copy another one of the subreports to the same generic
name on a record by record needs basis. The idea was pretty simple, but the
problem was in deleting the last used generic report as it was being held
open by the main report. I tried to close it in code, but this didn't work.
It looks like the idea of toggling the visible property of the various
subreports will need to stay and it will just need to be sent to the printer
by a machine with lots of RAM. The speed is fine here (probably because of
the gigabyte of RAM). The subreports themselves are not a lot different to
each other - similar data, but the difference is actually in the lines that
surround each of the pieces of data - they are structured like a table built
from lines and each of the subreports has a different number of lines in
that table. This is purely for appearance, but that is an important part of
it.

dixie

"MacDermott " <ma********@nos pam.com> wrote in message
news:E8******** ******@newsread 3.news.atl.eart hlink.net...
I would tend to agree that this won't work well.

How different are the subreports?

- Turtle

"dixie" <di****@dogmail .com> wrote in message
news:hP******** *********@nnrp1 .ozemail.com.au ...
What about this idea. Can I copy a subreport to a new name (which would be
a generic one in the report) for a record, then delete it and copy another
subreport to the same name for the next report, etc.? Just asking for an opinion.

I have played around with this for a while, but the problem was that I can rename the report to the generic subreport name, but then, I can't delete the renamed report for the next renaming because it is being held open by the report on which it is a subreport.

dixie

"MacDermott " <ma********@nos pam.com> wrote in message
news:5o******** *********@newsr ead1.news.atl.e arthlink.net...
Sorry -
I had overlooked the fact that you were using a report, not a form.
It looks as if you want to be able to show different subreports for
different records.
One work-around for this problem would be to put both subreports on the report in design view (on top of each other). Be sure you set their

CanGrow
and CanShrink properties to True.
Then in your Detail_Format event procedure, you can make the one you want visible and the other invisible.

This may run more slowly, but it should give you the result you want.

HTH
- Turtle

"dixie" <di****@dogmail .com> wrote in message
news:1C******** ********@nnrp1. ozemail.com.au. ..
> OK, I was so close - didn't put the quote marks in. However, I've just > tried this and I get error 2199 - You cant set the source object

property
> after printing has started. The code was in the Detail_Format section.
I
> guess I can try to do it in the open event. Whoops can't go there

either.
> Any ideas? The code I have now is:
>
> If [PrintType] = "05W04" Then
> Me.SubOutcomes. SourceObject = "sub5O5L"
> Me.SubOutcomes. LinkMasterField s = "EntryNumbe r"
> Me.SubOutcomes. LinkChildFields = "EntryNumbe r"
> End If
>
> But, I can't find the event to run it in - I have tried most
possibilities.
>
> dixie
>
> "MacDermott " <ma********@nos pam.com> wrote in message
> news:Zk******** ***********@new sread3.news.atl .earthlink.net. ..
> > Just set the SourceObject property to the name of your subreport:
> >
> > Me.SubReport.So urceObject="sub 505L"
> >
> > Don't forget to reset your LinkMasterField s and LinkChildFields
properties
> > after you change the SourceObject property.
> >
> > HTH
> > - Turtle
> >
> > "dixie" <di****@dogmail .com> wrote in message
> > news:zA******** *******@nnrp1.o zemail.com.au.. .
> > > I have a report with a subreport. The source object for this
subreport
> > > varies according to the value of a field in a table. I am

trying to > > > programmaticall y set the object source for the subreport as part of the
> > > detail format section of the report. I have been playing around

with
> > things
> > > like:
> > >
> > > Me.SubReport.So urceObject = Report.sub5O5L
> > >
> > > but nothing seems to work. Can I achieve what I want to do and

if so,
> can
> > > anyone give me the syntax I need to reset the source object of a
> > subreport.
> > >
> > > dixie
> > >
> > >
> >
> >
>
>



Nov 12 '05 #8
It sounds to me as if there might be a good chance you could use a single
subreport, changing out some of these "lines that surround the data".
I'm sure you realize you haven't given me enough information to make any
more specific suggestions...

HTH
- Turtle

"dixie" <di****@dogmail .com> wrote in message
news:zs******** *********@nnrp1 .ozemail.com.au ...
I know I didn't word that last message very well, but I think you get the
gist of it. The idea was to have only one generically named subreport and
then to delete it and copy another one of the subreports to the same generic name on a record by record needs basis. The idea was pretty simple, but the problem was in deleting the last used generic report as it was being held
open by the main report. I tried to close it in code, but this didn't work. It looks like the idea of toggling the visible property of the various
subreports will need to stay and it will just need to be sent to the printer by a machine with lots of RAM. The speed is fine here (probably because of the gigabyte of RAM). The subreports themselves are not a lot different to each other - similar data, but the difference is actually in the lines that surround each of the pieces of data - they are structured like a table built from lines and each of the subreports has a different number of lines in
that table. This is purely for appearance, but that is an important part of it.

dixie

"MacDermott " <ma********@nos pam.com> wrote in message
news:E8******** ******@newsread 3.news.atl.eart hlink.net...
I would tend to agree that this won't work well.

How different are the subreports?

- Turtle

"dixie" <di****@dogmail .com> wrote in message
news:hP******** *********@nnrp1 .ozemail.com.au ...
What about this idea. Can I copy a subreport to a new name (which would
be
a generic one in the report) for a record, then delete it and copy another subreport to the same name for the next report, etc.? Just asking for an opinion.

I have played around with this for a while, but the problem was that I can rename the report to the generic subreport name, but then, I can't delete the renamed report for the next renaming because it is being held open by the report on which it is a subreport.

dixie

"MacDermott " <ma********@nos pam.com> wrote in message
news:5o******** *********@newsr ead1.news.atl.e arthlink.net...
> Sorry -
> I had overlooked the fact that you were using a report, not a form. >
> It looks as if you want to be able to show different subreports for
> different records.
> One work-around for this problem would be to put both subreports on the > report in design view (on top of each other). Be sure you set their
CanGrow
> and CanShrink properties to True.
> Then in your Detail_Format event procedure, you can make the one you want
> visible and the other invisible.
>
> This may run more slowly, but it should give you the result you
want. >
> HTH
> - Turtle
>
> "dixie" <di****@dogmail .com> wrote in message
> news:1C******** ********@nnrp1. ozemail.com.au. ..
> > OK, I was so close - didn't put the quote marks in. However, I've

just
> > tried this and I get error 2199 - You cant set the source object
property
> > after printing has started. The code was in the Detail_Format

section.
I
> > guess I can try to do it in the open event. Whoops can't go there
either.
> > Any ideas? The code I have now is:
> >
> > If [PrintType] = "05W04" Then
> > Me.SubOutcomes. SourceObject = "sub5O5L"
> > Me.SubOutcomes. LinkMasterField s = "EntryNumbe r"
> > Me.SubOutcomes. LinkChildFields = "EntryNumbe r"
> > End If
> >
> > But, I can't find the event to run it in - I have tried most
> possibilities.
> >
> > dixie
> >
> > "MacDermott " <ma********@nos pam.com> wrote in message
> > news:Zk******** ***********@new sread3.news.atl .earthlink.net. ..
> > > Just set the SourceObject property to the name of your subreport: > > >
> > > Me.SubReport.So urceObject="sub 505L"
> > >
> > > Don't forget to reset your LinkMasterField s and LinkChildFields
> properties
> > > after you change the SourceObject property.
> > >
> > > HTH
> > > - Turtle
> > >
> > > "dixie" <di****@dogmail .com> wrote in message
> > > news:zA******** *******@nnrp1.o zemail.com.au.. .
> > > > I have a report with a subreport. The source object for this
> subreport
> > > > varies according to the value of a field in a table. I am trying
to
> > > > programmaticall y set the object source for the subreport as part of
> the
> > > > detail format section of the report. I have been playing

around with
> > > things
> > > > like:
> > > >
> > > > Me.SubReport.So urceObject = Report.sub5O5L
> > > >
> > > > but nothing seems to work. Can I achieve what I want to do and if so,
> > can
> > > > anyone give me the syntax I need to reset the source object of

a > > > subreport.
> > > >
> > > > dixie
> > > >
> > > >
> > >
> > >
> >
> >
>
>



Nov 12 '05 #9

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

0
1627
by: Etienne Charland | last post by:
I have a DataSource and a DataMember (like with standard bindings). Now, I want to write a function that gets the source object from them. So, let's say DataSource is a dataset and DataMember is "MyTable.Col1", I want to return MyDataSet.Tables("MyTable") I decompiled BindingContext and CurrencyManager classes to see how it can be done, and from what I understand, it is done with the TypeDescriptor class, like this: DataSet ds = new...
0
1266
by: christopher diggins | last post by:
Greetings All, I have commenced work on the Object Oriented Template Library (OOTL) which is an open-source library which seeks to provide a more object-oriented alternative to the STL and Boost. The design emphasizes ease of use over efficiency. The hope is that eventually this library can make C++ better suited for agile software development methods. I am looking for any and all ideas and suggestions of what people would like to see...
1
3856
by: Stephan Gehrlein | last post by:
Hello, I am using an access 2000 project with sql srv 2000 as an administrative tool to edit table data. I select the table names from a combobox in an access form and use myform.SourceObject = Table.dbo.mytable StoredProcedure.dbo.sp_xxx etc. wich gives me the error message "The form name you entered doesn't follow Microsoft Access object-naming rules". As a connected user of sysadmins role there is no prefix "dbo." added,
3
4893
by: CSDunn | last post by:
Hello, I currently have an Access 2003 ADP Report/Subreport set up in which I have 12 subreports in a single main report that are located in a group header called 'PermnumHeader' (Permnum would be the same as a numeric 'StudentID'). All subreports initially have their visible property set to 'No'. I have a macro that evaulates the current value of a field in the detail section of the main report called 'Grade' and a field in the same...
0
2339
by: Vince Zhang | last post by:
Hi, all I wanna make dso that implements OLEDBSimpleProvider interface to interact mshtml.dll. but meet problem in doing it. Could anybody help me? I do the following tasks: 1. use VS.NET IDE to create interop assembly dll about simpledata.dll(OLEDBSimpleProvider and its listener stuff). and use it in my class 2. create dispatch interface for defining msDataSourceObject and addDataSourceListener which should be invoked by IE.
5
2117
by: wxnut | last post by:
In VB 2005 I have six seperately named picture boxes (arranged in a table layout control) in which I plot different X/Y data lines. I would like to be able to right-click on a specific picture box (say, plot #3) and select a different line color for that one plot. How can I figure out which of the six plots is the one in question when right-clicking on it? I can easily change the line color using the context menu control, but I don't...
5
5847
by: sparks | last post by:
I have a form that is broken down into 24 sub forms. these are all tied to one subform, they are filtered based on other things. But I need to change the sub forms source object based on a selection. I was going to try this.. For Each doc In dbs.Containers("Forms").Documents frmname = doc.Name
5
2788
by: =?ISO-8859-1?Q?Norbert_P=FCrringer?= | last post by:
Hello, does anyone have for me a sample how to create an object, which has access to any form of data and can be used as a data source for data bound data grids. In my case I've got a com object (GRecordset) which should become a data source for a data grid. Thank you,
3
10682
by: Simon van Beek | last post by:
Dear reader, How to change the RecordSource for a subReport. For forms the syntaxes is:
0
8683
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
0
8611
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
0
9031
jinu1996
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth. The Art of Business Website Design Your website is...
1
8904
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
0
8876
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
1
6531
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
0
5867
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...
0
4624
by: adsilva | last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
3
2007
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.