473,890 Members | 1,825 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Trapping a next record event in subform

Hi there,

Does anyone know the simplest way I can trap the next record event in Access
2000 on a subform?

I have a main form with tab control which holds several subforms, and the
subforms are not editable unless the user clicks the "edit" button within
the subform. But I want to lock the subform's textboxes again once the user
proceeds to the next record. For some reason I was thinking form_current
would work, but it doesn't.

I am hoping I don't have to go through referencing the main form, that has
been such an ugly thing to debug in the past. remove the xs to reply
directly or post here. Thanks in advance for any advice ...

Carrie Hamm
Nov 12 '05 #1
1 5480
> I have a main form with tab control which holds several subforms, and the
subforms are not editable unless the user clicks the "edit" button within
the subform. But I want to lock the subform's textboxes again once the user
proceeds to the next record. For some reason I was thinking form_current
would work, but it doesn't.

Are you using the pertinent *subform's* "On Current" event procedure? I see no
reason why that won't work.

Bruce M. Thompson
bt******@mvps.o rg (See the Access FAQ at http://www.mvps.org/access)
NO Email Please. Keep all communications

within the newsgroups so that all might benefit.<<
Nov 12 '05 #2

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

by: William Wisnieski | last post by:
Hello Everyone, Access 2000, I have a main unbound form with a bound datasheet subform . The subform is bound to a query that returns records based on criteria in the main form. The user then double clicks a row on the datasheet subform to open yet another form bound to a table . These two forms are linked by the field. So far so good.
by: Bob | last post by:
Hi Everybody I have a form called frmListBox that is connected to a table tblListBox. This is opened from a form called "frmInvoiceOrder" which has a subform called "zfrmInvoiceOrder" and floats above (ie is pop-up) ! Private Sub ListBox_DblClick(Cancel As Integer) DoCmd.OpenForm "Forms!!!.Form! = Me!ListBox.Column(1) Forms!!.Form! = Me!ListBox.Column(2)
by: Susan Bricker | last post by:
Greetings. I have a Mainform with a subform. The Mainform has single record format and subform has continuous form format. When the Mainform opens, I force allowadditions and allowedits to FALSE (for both the Mainform and Subform). No problem there. However, when I click on the navigation control of the subform to move to the next record in the subform, the AllowAdditions and AllowEdits changes to TRUE. Not good. I set...
by: scsTiger | last post by:
I am using Access 2000 as the front end and MS SQL 2000 as the backend. I have a one record form that I set using something like: strSQL = "SELECT * FROM dbo_WBACCT WHERE (((dbo_WBACCT.ACCOUNT)='"423456"'));" Me.RecordSource = strSQL Obviously I only want one record at a time because the database is very big.
by: Tony Dunn | last post by:
I have inherited another developer's database (Access 2003) and with it a problem I'm struggling with. The problem is this. I have a parent-child form pair, which is populated by a table (the parent) and a query (the child). The two sources are linked by an identical unique number. The table populating the parent uses the number as primary key. The child table has no primary key so it can used one-to-many. Users add data through the form...
by: gavm360 | last post by:
Hello, I have a data entry form that has a button to copy the values of fields (CASECODE,STEPDES,CBOANSWER) into the fields (CASECODE,STEPDES,ANSWER) of a subform on the page. Private Sub cmdANSWER_Click() Forms!FRMMENU1!FRMANSWERSsubform! = Forms!FRMMENU1! Forms!FRMMENU1!FRMANSWERSsubform! = Me!
by: stuart | last post by:
I have a list of records in a subform that a user can either edit or delete. This is an unbound form. If the user deletes a record, I want to refresh the form, and then position the cursor on the next record on that subform. This seems like that this should be a fairly easy thing to accomplish, but I cannot get it to reposition the cursor on the next record. The following is my code segment: Any help would be greatly appreciated!!! ...
by: Lynx101 | last post by:
I am trying to move a subform onto the next record with: DoCmd.GoToRecord acForm, "MaintainAssets_edit", acNext but when I do this I get "The object 'MaintainAssets_edit' is isn't open". I know I could easily put the controls in the subform itself but I want the record controls at the top of the page, outside of the subform. Thanks for looking.
by: sblakethomas | last post by:
I created a code that would take me from the last field in a subform and take me to the next record first field on the parent form. Unfortunately, there is a little snag if I try to use the mouse to click into the subform from the parent form. It takes me to the next record again instead of just allowing me to click into the subform for that record. If I just tab, everything is fine, but this db is being used by others that may not remember or...
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth. The Art of Business Website Design Your website is...
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own.... Now, this would greatly impact the work of software developers. The idea...
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.