 Re: PHP + AJAX + Photo Editing
/*
Explanation: See the heading of the script itself, below.
Setup: Copy the following code and paste it into your image editing
script.
Requirements: The phpUnsharpMask script requires php version 4.0.6 or
higher and Thomas Boutell's gd library version 2.0 or higher. From php
version 4.3.1 gd is included.
Last modified: February 22, 2005
WARNING! Due to a known bug in PHP 4.3.2 this script is not working
well in this version. The sharpened images get too dark. The bug is
fixed in version 4.3.3.
Unsharp masking is a traditional darkroom technique that has proven
very suitable for
digital imaging. The principle of unsharp masking is to create a
blurred copy of the image
and compare it to the underlying original. The difference in colour
values
between the two images is greatest for the pixels near sharp edges.
When this
difference is subtracted from the original image, the edges will be
accentuated.
The Amount parameter simply says how much of the effect you want. 100
is 'normal'.
Radius is the radius of the blurring circle of the mask. 'Threshold' is
the least
difference in colour values that is allowed between the original and
the mask. In practice
this means that low-contrast areas of the picture are left unrendered
whereas edges
are treated normally. This is good for pictures of e.g. skin or blue
skies.
Any suggenstions for improvement of the algorithm, expecially regarding
the speed
and the roundoff errors in the Gaussian blur process, are welcome.
*/
function UnsharpMask($img, $amount, $radius, $threshold) {
////////////////////////////////////////////////////////////////////////////////////////////////
////
//// p h p U n s h a r p M a s k
////
//// Unsharp mask algorithm by Torstein Hønsi 2003.
//// thoensi_at_netcom_dot_no.
//// Please leave this notice.
////
///////////////////////////////////////////////////////////////////////////////////////////////
// $img is an image that is already created within php using
// imgcreatetruecolor. No url! $img must be a truecolor image.
// Attempt to calibrate the parameters to Photoshop:
if ($amount > 500) $amount = 500;
$amount = $amount * 0.016;
if ($radius > 50) $radius = 50;
$radius = $radius * 2;
if ($threshold > 255) $threshold = 255;
$radius = abs(round($radius)); // Only integers make sense.
if ($radius == 0) {
return $img; ]
imagedestroy($img);
break;
}
$w = imagesx($img); $h = imagesy($img);
$imgCanvas = imagecreatetruecolor($w, $h);
$imgCanvas2 = imagecreatetruecolor($w, $h);
$imgBlur = imagecreatetruecolor($w, $h);
$imgBlur2 = imagecreatetruecolor($w, $h);
imagecopy ($imgCanvas, $img, 0, 0, 0, 0, $w, $h);
imagecopy ($imgCanvas2, $img, 0, 0, 0, 0, $w, $h);
// Gaussian blur matrix:
//
// 1 2 1
// 2 4 2
// 1 2 1
//
//////////////////////////////////////////////////
// Move copies of the image around one pixel at the time and merge
them with weight
// according to the matrix. The same matrix is simply repeated for
higher radii.
for ($i = 0; $i < $radius; $i++) {
imagecopy ($imgBlur, $imgCanvas, 0, 0, 1, 1, $w - 1, $h - 1); // up
left
imagecopymerge ($imgBlur, $imgCanvas, 1, 1, 0, 0, $w, $h, 50); //
down right
imagecopymerge ($imgBlur, $imgCanvas, 0, 1, 1, 0, $w - 1, $h,
33.33333); // down left
imagecopymerge ($imgBlur, $imgCanvas, 1, 0, 0, 1, $w, $h - 1, 25); //
up right
imagecopymerge ($imgBlur, $imgCanvas, 0, 0, 1, 0, $w - 1, $h,
33.33333); // left
imagecopymerge ($imgBlur, $imgCanvas, 1, 0, 0, 0, $w, $h, 25); //
right
imagecopymerge ($imgBlur, $imgCanvas, 0, 0, 0, 1, $w, $h - 1, 20 );
// up
imagecopymerge ($imgBlur, $imgCanvas, 0, 1, 0, 0, $w, $h, 16.666667);
// down
imagecopymerge ($imgBlur, $imgCanvas, 0, 0, 0, 0, $w, $h, 50); //
center
imagecopy ($imgCanvas, $imgBlur, 0, 0, 0, 0, $w, $h);
// During the loop above the blurred copy darkens, possibly due to a
roundoff
// error. Therefore the sharp picture has to go through the same loop
to
// produce a similar image for comparison. This is not a good thing,
as processing
// time increases heavily.
imagecopy ($imgBlur2, $imgCanvas2, 0, 0, 0, 0, $w, $h);
imagecopymerge ($imgBlur2, $imgCanvas2, 0, 0, 0, 0, $w, $h, 50);
imagecopymerge ($imgBlur2, $imgCanvas2, 0, 0, 0, 0, $w, $h,
33.33333);
imagecopymerge ($imgBlur2, $imgCanvas2, 0, 0, 0, 0, $w, $h, 25);
imagecopymerge ($imgBlur2, $imgCanvas2, 0, 0, 0, 0, $w, $h,
33.33333);
imagecopymerge ($imgBlur2, $imgCanvas2, 0, 0, 0, 0, $w, $h, 25);
imagecopymerge ($imgBlur2, $imgCanvas2, 0, 0, 0, 0, $w, $h, 20 );
imagecopymerge ($imgBlur2, $imgCanvas2, 0, 0, 0, 0, $w, $h,
16.666667);
imagecopymerge ($imgBlur2, $imgCanvas2, 0, 0, 0, 0, $w, $h, 50);
imagecopy ($imgCanvas2, $imgBlur2, 0, 0, 0, 0, $w, $h);
}
// Calculate the difference between the blurred pixels and the
original
// and set the pixels
for ($x = 0; $x < $w; $x++) { // each row
for ($y = 0; $y < $h; $y++) { // each pixel
$rgbOrig = ImageColorAt($imgCanvas2, $x, $y);
$rOrig = (($rgbOrig >> 16) & 0xFF);
$gOrig = (($rgbOrig >> 8) & 0xFF);
$bOrig = ($rgbOrig & 0xFF);
$rgbBlur = ImageColorAt($imgCanvas, $x, $y);
$rBlur = (($rgbBlur >> 16) & 0xFF);
$gBlur = (($rgbBlur >> 8) & 0xFF);
$bBlur = ($rgbBlur & 0xFF);
// When the masked pixels differ less from the original
// than the threshold specifies, they are set to their original
value.
$rNew = (abs($rOrig - $rBlur) >= $threshold)
? max(0, min(255, ($amount * ($rOrig - $rBlur)) + $rOrig))
: $rOrig;
$gNew = (abs($gOrig - $gBlur) >= $threshold)
? max(0, min(255, ($amount * ($gOrig - $gBlur)) + $gOrig))
: $gOrig;
$bNew = (abs($bOrig - $bBlur) >= $threshold)
? max(0, min(255, ($amount * ($bOrig - $bBlur)) + $bOrig))
: $bOrig;
if (($rOrig != $rNew) || ($gOrig != $gNew) || ($bOrig != $bNew)) {
$pixCol = ImageColorAllocate($img, $rNew, $gNew, $bNew);
ImageSetPixel($img, $x, $y, $pixCol);
}
}
}
imagedestroy($imgCanvas);
imagedestroy($imgCanvas2);
imagedestroy($imgBlur);
imagedestroy($imgBlur2);
return $img;
}
|
